How to fix or fix a dead turn signal, brake, twilight, yamaha mio j, xeon, mio m3, x ride and check the cable path.
The first step is to check the battery current after the contact is on before the penny switch, make sure there is a current. The next step is to check the output of the penny switch, make sure it flashes into the cent switch socket.
Next, check the output current of the front or rear left turn signal with the brown and dark green wires, the output cable from the right cent switch and also make sure that every turn signal light is on time with the black wire attached to the body or frame of the motorcycle.
For the front and rear twilight lights, check the blue wire, the red line, for the front and rear twilight, it's yellow. And the motorbike must be turned on because the line is from kiorok.
and for the brake light check the blue wire.
Thank you so much to all #SUBSCRIBER#
and watch, hopefully the knowledge is useful.
please #subscribe#
@Sidik Nuryaden CHANNEL.
If you have any questions, please write them in the comments.
Tel/WA: 085863491419.
Thank you very much.
Негізгі бет Автокөліктер мен көлік құралдары How to Overcome/Repair the Mon, Brake, Twilight Yamaha Mio J, M3, Xeon,XRide Lights Off.
Пікірлер: 177