Beautiful! Thank you for sharing, great inspiration!
@danielnugent2168
4 жыл бұрын
Thankyou for your kind words
@peteramond3358
5 жыл бұрын
Nice solid neat job as always matey looks as you said a new door keep the vids coming
@danielnugent2168
5 жыл бұрын
Many thanks mate.
@chr1staki
3 жыл бұрын
Looks fantastic!
@danielnugent2168
3 жыл бұрын
Many thanks mate
@alexhogan1
4 жыл бұрын
Lovely job! Thanks 👍
@Jason52597
5 жыл бұрын
Awesome video
@danielnugentpainteranddeco557
5 жыл бұрын
Cheers mate
@Bob_Nuggett
4 жыл бұрын
Have a word with the owner, gotta match those 2 meter boxes outside with the same colour
@HeadstoneRestorer
5 жыл бұрын
Nice finish. Did you use a roller or brush? Thanks
@wemoveforward6413
3 жыл бұрын
Looks mega pal! Good work!
@danielnugentpainteranddeco557
3 жыл бұрын
Cheers mate
@wemoveforward6413
3 жыл бұрын
@@danielnugentpainteranddeco557 how did you find the zinsser sticking to the sealant on the frame?
@danielnugentpainteranddeco557
3 жыл бұрын
@@wemoveforward6413 yeah all good.
@ProfessionalPainterDecorator
4 жыл бұрын
looks nice, but why didn't you put the dark tones exterior F&B Uc on before you did the finish coats, it would help with coverage?
@deekoh3996
2 жыл бұрын
Gret stuff Daniel Was wondering which brand round sash brushes do you use/prefer? Thinking of ordering some Hamilton’s.
@danielnugentpainteranddeco557
2 жыл бұрын
Hi. I've gone on to Arroworthy as I find they last and also they are compatible with the Brushmate 20 box for solvent paint brushed. Cheers Dan
@mark4lev
4 жыл бұрын
The best thing to prep the door for undercoat is to rub down with 'mirka mirlon scotch ultra fine' £20 for 10 metres ebay. Use with warm water and a bucket. This is used in the motor trade to make paint stick to car body panels and they work to more exacting standard than decorating. Use any outdoor primer, you don't need to rub down after priming. You only need two topcoats after primer. Follow this and your paint will cover like you won't believe. You can thank me later. LETDK.
@danielnugent2168
4 жыл бұрын
Nice tip. Cheers
@englishdecorator
2 жыл бұрын
Didn't know that car's were made out of upvc...
@mark4lev
2 жыл бұрын
@@englishdecorator I wish to extend my thanks for your highly technical and erudite contribution. Long may it continue.
@GMG2FX
4 жыл бұрын
Brilliant job mate. If painting the inside is interior egg shell needed or can I just use the exterior stuff? Worried about safety.
@danielnugent2168
4 жыл бұрын
Yes you can as its all water based. Cheers Dan
@MrLewieF
5 жыл бұрын
Thanks , great video
@michaelt1975
7 ай бұрын
Hi . Which farrow and ball did you i Use estate eggshell ? Have noticed they have exterior eggshell on their website also ? Am gonna be doing outside pvc windows. I was recommended rather farrow & ball or zinsser allcoat which has a self primer built in.
@danielnugent2168
7 ай бұрын
There is now a B.I.N Aqua for primer but I use Caparol Haftprimer and defo exterior eggshell
@djpaulsid
6 ай бұрын
Is this the same method to use in internal pvc skirting boards?
@naz-x
Жыл бұрын
Hi Dan, great work as always! Will Zinsser BIN work too as I have loads left and don’t want to go and get 123 or Otex Akva if I can avoid it! Thanks
@danielnugentpainteranddeco557
Жыл бұрын
Perfect to use
@Trish-ql9kz
6 күн бұрын
I’ve just bought farrow and ball eggshell for my UPVC front door... just realised that it says it’s for wood and metal, did you use this one please.. how is the door holding up ?
@danielnugentpainteranddeco557
57 минут бұрын
@@Trish-ql9kz door still looks great. Make sure you get the exterior eggshell
@jamesmatten1980
3 жыл бұрын
Hi what did you use to prepare the door before primer
@danielnugent2168
3 жыл бұрын
Hi. I used Virasol which is a degreaser You can pick it up on MyPaintbrush
@Avital4414
Жыл бұрын
Did you use brush and roller? When you use both, do you lay off with the brush after rolling? Thanks, mate.
@danielnugentpainteranddeco557
Жыл бұрын
I used a brush and roller and laid off with a brush as they were small panels. On big flat doors I use a short pile microfiber sleeve and lay off with the roller. Cheers Dan 🍻
@Avital4414
Жыл бұрын
@@danielnugentpainteranddeco557 thanks, your videos are incredibly helpful.
@danielnugentpainteranddeco557
Жыл бұрын
@@Avital4414 thanks so much mate. I try and give my most honest opinion and try and help others when I come across ideas or problems. Cheers Dan
@jamesmatten1980
3 жыл бұрын
Thanks did you key the door before so the paint sticks
@danielnugent2168
3 жыл бұрын
No mate but you can use a sand pad. They are like a flexi sponge with a sand facing each side
@Dreams2come_
4 жыл бұрын
I wasn’t really understanding so what’s the color of the grey and finish exactly I want my door the same color what was the 123 paint was that the primer ?????????????
@danielnugent2168
4 жыл бұрын
Hi. The primer is Zinsser 1.2.3. It's water based. And top coat is Farrow And Ball Exterior Eggshell and the colour is Downpipe. Cheers Dan
@Dreams2come_
4 жыл бұрын
Daniel Nugent So the color is downpipe by who what brand I have no idea about paint 🎨 so I’m tryna get this right
@danielnugent2168
4 жыл бұрын
@@Dreams2come_ Farrow and Ball
@Dreams2come_
4 жыл бұрын
Daniel Nugent ok thanks
@jamesogrady2717
3 жыл бұрын
Can I ask what's the best roller to use
@danielnugent2168
3 жыл бұрын
Two Fussy Blokes rollers are good. Or Wooster or Arroworthy. All are microfiber. I would use a medium pile.
@hayleycollins9329
4 жыл бұрын
Hi. I’ve looked on farrow and balls website and they don’t do and Exterior Estate Eggshell?
@danielnugent2168
4 жыл бұрын
Hi. Yes they should do. If you can't see it then try B&Q or Brewers as they stock it. Cheers Dan
@danielnugentpainteranddeco557
4 жыл бұрын
If you go back on Farrow and Ball and look for Exterior Eggshell. That will work. As the Estate is interior. Cheers Dan
@zainabbharuchi4328
4 жыл бұрын
Great video - I followed this and my front door looks great. Although now I want to change the colour. Do I sand down the painted PVC before priming or do I paint on top of old paint?
@danielnugent2168
4 жыл бұрын
Hi. Just de nib it slightly and then repaint. No need to sand down hard. Cheers Dan
@BELOGIC-mc3cr
3 жыл бұрын
Can I use just Zinsser Allcoat Exterior Satin or should go with Zinsser 123 first and then separate colour? thank you
@danielnugent2168
3 жыл бұрын
Zinsser all coat is a self priming and undercaoting and also a finish. Yes it has good adhesion aswell so you can use that neat. Cheers Dan
@BELOGIC-mc3cr
3 жыл бұрын
@@danielnugent2168 Thank you!
@anthonycross6392
5 жыл бұрын
Hi Daniel, could I just use zinsser one coat on some upvc cladding I have or better to prime first? Thanks for a great video.
@danielnugent2168
5 жыл бұрын
Hi. Zinsser is the primer. Then whatever you want on top as a finish. Cheers Dan
@anthonycross6392
5 жыл бұрын
@@danielnugent2168 oh ok thanks for replying mate. All the best.
@hopclang9409
3 жыл бұрын
i think Anthony was asking if he could only use Zinsser, ie Zinsser All Coat Exterior Satin, water based from Rawlins, it comes in hundreds of colours from website, very quick delivery too
@rattylol
3 жыл бұрын
I think it looks beautiful but am very sceptical on the wear factor
@danielnugent2168
3 жыл бұрын
The door still looks good today. No wear as of yet
@techreviewireland7528
4 жыл бұрын
Did you end up putting 3 coats or 2
@danielnugent2168
4 жыл бұрын
Three coats as it was over white primer. Cheers
@kevinjackson6387
3 жыл бұрын
Hi mate ,what about when the door or windows have been rapped would you do same way
@danielnugentpainteranddeco557
3 жыл бұрын
Yes I would but I've just purchased a GX21FF Graco machine so might start spraying more
@kevinjackson6387
3 жыл бұрын
@@danielnugentpainteranddeco557 right ok ,I got some light brown ones to price ,they want them black but trying to get them to have them dark grey,have you used any Benjamin Moore paint I like it better than f&b
@danielnugentpainteranddeco557
3 жыл бұрын
@@kevinjackson6387 I've never tried Benji Moore but I have used Everall Aqual 10 by Tikkurila which is an exterior waterbased eggshell mixed to Farrow and Ball or Little Greene and even Dulux
@kevinjackson6387
3 жыл бұрын
@@danielnugentpainteranddeco557 right ok ,so much diff products out there now ,using tic stuff on a job at the moment ar2 ceiling paint,good gear ,I might get old frame and try do few samples on it ,as I’ve never painted upvc before
@sairasorayyah
4 жыл бұрын
Hi Daniel I'm thinking of painting a new composite pvc door can I use this technique with the sugar soap prep, 123 primer and farrow and ball exterior wood paint?
@danielnugent2168
4 жыл бұрын
Hi. Yes you can. Make sure you get the exterior estate eggshell and not the interior estate eggshell. Regards Daniel
@sairasorayyah
4 жыл бұрын
@@danielnugent2168 thank you so much 😊
@michellehayward3838
5 жыл бұрын
is this done with roller or brush
@danielnugent2168
5 жыл бұрын
I did it with a brush
@discomarly
5 жыл бұрын
Dude was that just with a brush no roller involved i am going to do mine but thinking of brush marks
@danielnugent2168
5 жыл бұрын
Hi. I got away with just a brush and you can't see any brush marks. I hear Two Fussy Blokes roller sleeves for a sprayed finish are good
@squidlings
4 жыл бұрын
1200 grit with water.
@markbusby9709
5 жыл бұрын
Got to say Daniel that looks good, and saved a lot of people money. Question if you don't mind , was offered to paint an"Old glass fibre "double garage panelled door"... white, to be honest I bottled it because they wanted it" Black" ! Satin or near as possible just not gloss, the door was very pliable, especially the panels you could easily flex with your thumb. With all the etching/grip paints available eg Zinsser being one of the better, would you undertake painting a door as described, or advise client go the route as used in "marine" (boats) complicated & costly, but achieves the desired outcome . Cheers Mark
@danielnugent2168
5 жыл бұрын
Hi. I'm going to attempt my own garage door soon which is self finished. I hear that Bedec Barn Paint is good and All Coat by Zinsser. Also MSP by Bedec. All Water based aswell. Test a patch out but remember it does take up to 7 days to cure.
@markbusby9709
5 жыл бұрын
Thx for your reply Daniel, is your door fibre glass or other? as f/glass has its issues that I'm concerned with. TY
@danielnugent2168
5 жыл бұрын
@@markbusby9709 it's PVC. I think with the right primer you'll be ok with a satin or eggshell Top Coat. I still think the Farrow and Ball is the best as it's a nice flatter finish
@chelseyhughes7089
5 жыл бұрын
@@danielnugent2168 can you confirm if its the farrow and ball exterior eggshell as I`ve been reading not recommended for exterior plastics, nice job by the way
@danielnugent2168
5 жыл бұрын
@@chelseyhughes7089 Hi. If you put the Zinsser123 on first then your good to go. Cheers Dan
@squidlings
4 жыл бұрын
No masking. How did u do such a good job? Magical! I'd have paint up the outside walls
@danielnugent2168
4 жыл бұрын
Years of experience. Cheers
@andrewwaddams1022
4 жыл бұрын
@@danielnugent2168 cock
@samsteele4879
4 жыл бұрын
Where did u get the primer from thanks sam
@danielnugent2168
4 жыл бұрын
Hi. I got it from Crowns but you can get it in Screwfix aswell. Cheers
@ashtonjackson3585
5 жыл бұрын
Can you use the zinsser 123 with a spray gun and also the farrow & ball? Cheers
@danielnugent2168
5 жыл бұрын
Hi. Yes you can. Just thin it out slightly.
@squidlings
4 жыл бұрын
You can use aerosol cans, 6x grey primer £20 amazon. Plus a few cans of whatever top coat u fancy.
@mrlewisnet
5 жыл бұрын
do you prepair the door before you prime it...?
@danielnugent2168
5 жыл бұрын
Hi. Yes I wiped it all over with sugar soap.
@mrlewisnet
5 жыл бұрын
@@danielnugent2168 cheers
@mrlewisnet
5 жыл бұрын
was the farrow and ball paint made for masonry or wood exterior...?
@danielnugent2168
5 жыл бұрын
@@mrlewisnet Hi. This is exterior eggshell for wood. Masonry is for render. Farrow and Ball do both
@mrlewisnet
5 жыл бұрын
@@danielnugent2168 thank you very much going to give it a try
@carolnewell741
5 жыл бұрын
Shouldn't you have removed handle
@danielnugent2168
5 жыл бұрын
I did if you look close on the white primer. I left the lock in as it wouldn't budge. I put the handle back after each coat dried.
@scottbob3917
5 жыл бұрын
I bet it chips off
@Racelinekarting
3 жыл бұрын
Or when the door has been left shut for a few days then reopened and it will all come off where the seals touch.
@69Robbiejue
5 жыл бұрын
Just spray it, sorted !!
@alexhogan1
4 жыл бұрын
Rob Hunt not everyone have a sprayer.
@gachtimetoshine4518
5 жыл бұрын
Stick to the painting man Co's your camera work is 💩! But great finish
Пікірлер: 108