To carry out this project we recommend the use of:
-MTN PRO White Base Primer (www.montanacol...)
-MTN 94 (www.montanacol...)
-MTN PRO Acrylic Varnish or MTN PRO 2k Varnish, if you are looking for a more resistant finish. (www.montanacol...)
0:24 Spray the board with water and sand it with fine sand paper
0:37 Before painting, make sure it’s dry and clean
0:44 Apply the MTN PRO White Base Primer. Shake can well during 1 minute. Paint holding the cans as vertically as possible. Apply three or four thin layers rather than a thick one and make sure to cover the whole board.
1:09 Let the Paint dry for about 20 minute.
1:12 Tape off areas to be painted
1:20 Shake spray Paint well and apply to the board. Apply three or four thin layers rather than a thick one and make sure to cover the whole board.
1:34 If using several colors, let the Paint dry for a least 15 minutes.
1:51 Don’t let the Paint dry for more than 60 minutes before varnishing or wait for 6 days.
1:59 Shake the varnish well during 1 minute before use it and apply three or four thin layers rather than a thick one and make sure to cover the whole board. Let the varnish dry for 15 minutes between layer
2:09 After 24 hours, the varnish will be completely dry and you will be able to enjoy the best waves
Recycle - Repinta - Reuse!
Web: www.montanacol...
Instagram: / montana_colors
Blog: www.mtn-world.c...
Facebook: / montanacolors
Montana Colors DIY is the KZitem channel of Montana Colors dedicated to #handicrafts #decoration #creativity #tutorial #bellasartes #paint #diy #mtncolors #montanacolors #sprayplanet # mtn2018 #mtnpro #spray #marker #dabbers
www.montanacolors.com
Негізгі бет How to paint and varnish a surfboard with Montana Colors
Пікірлер: 15