Great job. Another tip for you Mr FLIPPA, throw in a wet paper towel into baggie with paint brush or roller. The humidity of the paper towel helps keep brush or roller pliable even longer.
@FurnitureFlippa
3 жыл бұрын
Great tip! Thanks!
@AtmosphereASMR
3 жыл бұрын
thanks for the tip - I'm going to do this from now on!
@steveswanson6280
3 жыл бұрын
Why the hell I never thought to use black primer I'll never know. Great video!
@FurnitureFlippa
3 жыл бұрын
I use to use white LOL bad idea since minor scuffs look terrible. I didn't think of it right away for some reason lol
@mastiffmom2592
3 жыл бұрын
That’s what I love about KZitem. I learn something new all the time.
@VioletJoy
3 жыл бұрын
You brought that piece back to life. Very nice!! It was boring before and now it looks like a quality piece that would go perfectly in my home. 🖤😁🖤
@FurnitureFlippa
3 жыл бұрын
thank you Violet!
@annodnostaw9971
3 жыл бұрын
I like the look of a subtle brushstroke. I think it gives the piece some character.
@FurnitureFlippa
3 жыл бұрын
Thanks!!
@lindacarden9698
3 жыл бұрын
That’s brilliant using a sink strainer for straining paint. You made these beautiful enough for any design.
@jodyhakala-ristow7014
2 жыл бұрын
Good tip on the cleaning in the crud cutter because I got mine from furniture off the street
@ChicAntiquebyHolly
3 жыл бұрын
Love that smooth finish 😍😍😍
@FurnitureFlippa
3 жыл бұрын
Thanks, glad you liked it!!
@thefurnitureguy4950
3 жыл бұрын
Easy to follow as always 👍
@FurnitureFlippa
3 жыл бұрын
Thanks man!! 👍
@MDaly-mu5tm
3 жыл бұрын
Great tutorial...loaded with great information, thank-you!
@ChristinaHomeSweetHome
3 жыл бұрын
Amazing black piece, great work 🤩
@FurnitureFlippa
3 жыл бұрын
Thank you! Just a simple video for anyone to give it a shot
@blackkman1324
Жыл бұрын
HELL NO!!!! 6 HOURS OF WORK AND 30..00 OF SUPPILES FOR A FREE - 10.00 PIECE OF JUNK!!! IF YOU PUT SOME TIME IN YOU CAN SELL FOR 50.00!!!
@Hydrxzl
2 жыл бұрын
What if I don't have a sander
@cookiemarie9960
Ай бұрын
You wouldn’t happen to be located near the border would you? Lol. I’m in Buffalo/Niagara Falls and I would absolutely buy a piece from you in this finish!
@sendheron1
2 жыл бұрын
Wow😳😳class job!!
@judymielcarek6011
2 жыл бұрын
Awesome job!
@teresaogg6533
3 жыл бұрын
Great job!
@teebaby7387
2 жыл бұрын
Great job 👏🏽
@clarkemily2279
3 жыл бұрын
thank you. if i were to follow the same steps for my wooden desk and successfully finish it, will the black paints eventually wear out? cuz I will be using my desk everyday and there will be a friction on the surface of the desk
@Phloppy
2 жыл бұрын
It’s not my taste, but he did a beautiful job!!! So impressive! What would you suggest for a petite metal folding side table? I have a bottle of primer and matte black spraypaint I was going to paint it, but it does have a couple of rust spots and one hole the length of an American quarter I’m unsure how to remedy. Should I patch it somehow? Is there a wood filler equivalent for metal? Why am I asking you all these questions? I’m just going to google it. Cheers and thanks in advance! lol
@I-S-S-D-R-I
2 жыл бұрын
Good job👍
@mastiffmom2592
3 жыл бұрын
Man that looks soo nice! I can’t get it right… thin coat, thick coat, Wooster brush Dixie Belle Mineral Silk paint, off white. Paint strokes galore.
@FurnitureFlippa
3 жыл бұрын
Little strokes aren't bad!! If you dont want them just sand with high grit after each coat. Then make sure the last one is thin!
@mastiffmom2592
3 жыл бұрын
@@FurnitureFlippa Man! You finally helped me figure it out! I’m using chalk paint now and still could not get it right. Not only did I do short strokes, I also used a water mister. It makes the paint go farther and smooth. I’m excited now. I was feeling so defeated. Now, I have a great new outlook. I am a slow, methodical person in everything I do, even when eating. Working with the paint until my brush is empty along with water gave me decent 1 coat coverage. Tomorrow I’ll give it a second coat and I really think it’s going to be awesome. Thanks so much!!!
@FurnitureFlippa
3 жыл бұрын
@@mastiffmom2592 no problem!! Good luck with you project :)
@betheirvoice76
Жыл бұрын
I tried lots of different tricks that I've seen other people use and gave up. I bought a paint spraying gun from Amazon and it makes things so simple and gives a great smooth finish.
@ruheluddin9384
Жыл бұрын
Can you share the type of brush you’ve used please and where you’ve purchased it from? You don’t recommend a roller for the larger areas?
@ninas992
3 жыл бұрын
Nice job!
@FurnitureFlippa
3 жыл бұрын
Thanks!!
@tonipope3164
3 жыл бұрын
Gorgeous
@doddnejadfard3251
3 жыл бұрын
Glad to see your video
@FurnitureFlippa
3 жыл бұрын
Thanks Dodd!
@christianlucas2864
Жыл бұрын
If i don't spray poly, can i just brush on poly, these are for thin like sized arm rests and legs of leather accent chairs
@tomwalsh6056
2 жыл бұрын
Looks great…
@darlenesmith6038
Жыл бұрын
Beautiful
@FurnitureFlippa
Жыл бұрын
thanks Darlene!
@stevensilver
Жыл бұрын
just finished third coat of coal black on bedside table. on top and sides paint streaks are present. any way to eliminate. thanks
@Celanth
3 жыл бұрын
Sublime!
@beyondcomfortbnb6019
Жыл бұрын
Hello. On average, how much would all of these tools cost me? I’m considering if it’s worth me doing it myself or just paying someone to complete the job.
@nukapuka
3 жыл бұрын
I have 2 identical ones like this. Almost. But I removed the bottom wood as is very 80/90s? Not sure.
@Jerbraska
2 жыл бұрын
is the matte primer, like matte paint, harder to clean or because it is a primer and you put another coat of paint on top of it, you don't have that problem? Maybe I'm thinking of matte finishes and matte primers don't have that problem so as long as your top coat is different....
@kaibe5241
16 күн бұрын
Very nice :)
@FurnitureFlippa
16 күн бұрын
Thanks!!
@EGWrestling2009
2 жыл бұрын
ON THE SIDE PANELS ,IS THE GRAIN GOING DOWN AND NOT ACROSS ?
@GummiGudna
3 жыл бұрын
Hiya Flippa, is there a reason you dont sand it inbetween spray coats?
@kimberlyg6317
3 жыл бұрын
Nice shots! What do you record with?
@FurnitureFlippa
3 жыл бұрын
Thanks! a Lumix G85!
@stevensgarage-
Жыл бұрын
What is the best way to prevent the paint from chipping easy?
@FurnitureFlippa
Жыл бұрын
Multiple coats of a topcoat protection layer. Polyurethane, lacquer, or wax are common ways to protect the paint.
@ReconstructingEmily
3 жыл бұрын
Why do you prefer fusion mineral paint over behr black paint? Curious because I am probably going to run out of my behr black paint soon. Maybe I need to switch it up. 🤔
@FurnitureFlippa
3 жыл бұрын
I found the FM paint would adhere better to the surface! I had Behr peel on some projects. But that could have been poor prep work too. I also find Fusion glides on nicely with a bit of water on your brush. Also, the combo of fusion and Varathanes diamond wood finish water-based poly feels super durable, because Fusion says they have a built-in topcoat on the paint, so adding poly is like double protection!
@ReconstructingEmily
3 жыл бұрын
@@FurnitureFlippa Does a container last longer for you than the similar sized behr paint?
@FurnitureFlippa
3 жыл бұрын
@@ReconstructingEmily If I spray Behr and brush Fusion, Fusion lasts much longer. I haven't sprayed fusion yet. And brushing Fusion lasts longer than brushing Behr because Fusions coverage is better.
@ReconstructingEmily
3 жыл бұрын
@@FurnitureFlippa Thanks for the responses! 😀
@majicmyke84
3 жыл бұрын
Good Video and Nice work! Question tho...Are you light sanding between coats of the poly? Thanks!!
@FurnitureFlippa
3 жыл бұрын
I don't because I find it risks scuffing the surface. If you have a 600 grit sanding sponge pad you can certainly give it a light sand that's no problem!
@ciaramulligan3761
3 жыл бұрын
Great piece ! What platforms are you selling your stuff on?
@FurnitureFlippa
3 жыл бұрын
Facebook and local buy sell websites!
@RideWithAnthony
3 жыл бұрын
What grade of sand you using ?
@Debo1717
3 жыл бұрын
Nice video
@FurnitureFlippa
3 жыл бұрын
Thanks Willard!
@miriamgreeneyes1
2 жыл бұрын
I need to do a wooden kitchen table in black but only the top..so what kind of paint do I use cause food, plates etc...will be going on there. Do no want paint coming off..would love your advice. Thank you!
@FurnitureFlippa
2 жыл бұрын
Would you consider a black stain? That would probably hold up great with multiple coats of poly over it compared to paint. But this method in this video would hold up good to with an extra 4-6 coats of poly on the top for extra protection.
@barbararippert1184
2 жыл бұрын
What if lacquer is white? Too much sprayed on
@marinefigueroa8490
Жыл бұрын
What if I don’t have the spray tool can I brush on the poly?
@FurnitureFlippa
Жыл бұрын
You can, but you will likely get brush strokes/marks. Use a foam applicator for best results without a sprayer. You can see me doing this in my latest videos painting the cane chairs or the "Painting Nightstands for Beginners" video. Thanks for watching!
@hectorsanchez2524
2 жыл бұрын
How’d you price this bro?
@theresasteiner2748
3 жыл бұрын
Question You used an oil-based primer and a latex paint? I didn't know the latex would adhere to the oil. Is there something I'm missing?
@tja1114
2 жыл бұрын
he added water to it & said it was a water based poly
@bobwadsworth4799
3 жыл бұрын
Very nice. I'd like to see a video of you spraying FM paint and if you can note whether you use more of less FM vs Behr when spraying. I'm new to this game so I use the less expensive Behr paint vs FM, Dixie Belle or Annie Sloan, etc. But again, good job.
@FurnitureFlippa
3 жыл бұрын
I will have to give it a try sometime! Thanks for watching
@jungbechtospk40
Жыл бұрын
I did it with Woodglut.
@RevohYT
2 жыл бұрын
Can you just leave it with the primer and stop? Lol it looked sick like that
@rubenhayk5514
3 жыл бұрын
when you go tru a goth phase
@FurnitureFlippa
3 жыл бұрын
LOL
@blackkman1324
Жыл бұрын
HELL NO!!!! 6 HOURS OF WORK AND 30..00 OF SUPPILES FOR A FREE - 10.00 PIECE OF JUNK!!! IF YOU PUT SOME TIME IN YOU CAN SELL FOR 50.00!!!
Пікірлер: 84