Ok bro yr like a professional painter but the real thing is at home with spray paint cans...
@ElYumaOfficial
8 ай бұрын
Yea for real this to professional for me i need a spray paint from walmart to plastic tutorial
@SprayWayCustoms
3 жыл бұрын
What will we do without the maroon Scotch-Brite 😂😂 I think that's my favorite item in the booth 👌
@PHARRAWAY
3 жыл бұрын
you got that right
@niamakhtar2234
3 жыл бұрын
revert to stealing some of the green scrubber from the kitchen...LOL!!!
@cockus123
Жыл бұрын
Unreal.... ITS NOT THIS HARD. Everyone makes it seem like there's 100 steps.. wow.
@SprayWayCustoms
3 жыл бұрын
I think I'm first this time...tuned in Pharraway 👍🏾
@PHARRAWAY
3 жыл бұрын
Nice Thank You brother
@DucTaZenSurfer
2 жыл бұрын
Damn, learned something new today and a new skill. Thanks for sharing your knowledge and skills in such a digestible way. Always amazed at people who share their craft. Thanks! Now I know how to paint my own dirt bike plastics!
@crispystevee
10 ай бұрын
So basically i should just drive around with a different color mirror huh
@jessicamasterson4394
2 жыл бұрын
Thank you for explaining this in very simple terms for someone who has not done this before. Appreciate it!
@JQUICK21
Жыл бұрын
There is no need to sand anything when it is a dull black matte plastic which was never painted in the first place....I believe......right?
@PHARRAWAY
Жыл бұрын
No you still need to scuff it
@nathanbennett9025
2 жыл бұрын
At 4:11 could I use spray max 2k epoxy primer instead of sealer
@PHARRAWAY
2 жыл бұрын
Yes you can
@adenramirez870
Жыл бұрын
Thank you for being very thorough with this instruction. I did not want to pay and get this done by someone so I learned to do it myself thanks to you! You saved me hundreds if not thousands
@zenon6752
7 ай бұрын
I could also just use 400 grit sandpaper right?
@PHARRAWAY
7 ай бұрын
That is correct
@stanleybowman4464
Жыл бұрын
Good finish. It's an awful lot of stuff needed for such a small piece of plastic.
@adamschofield3558
3 жыл бұрын
If you don't have any scotch-brite pads what grit sandpaper would you recommend
@PHARRAWAY
3 жыл бұрын
600 grit
@garbo3682
5 ай бұрын
Im painting a plastic bumper on a KIA...do I need to use the paint stick on the bumper ??....im joking with you...thanks for the instructions 😅
@anthonyramer3648
8 ай бұрын
Do I need to put a flex additive in the clear coat or just an adhesion promoter?
@PHARRAWAY
8 ай бұрын
Yes
@Go69
Жыл бұрын
Newbie here as well. Just got new "sport" type mirrors for my OBS Chevy and need to paint match them. Very good detail as I was able to follow along. You got a like from me.
@typowers101
2 ай бұрын
Love your videos man I’ve grew up in a body shop my whole life and I’m 19 now and getting serious into it
@RTCDigitalS
Ай бұрын
Hey man, great video. Are you messuring the spray spread after spraying on the wall? If so why ?
@chris01479
Жыл бұрын
Very good, I like your idea of put the wood on the wing mirror cover to hold it without touch the paint. I'm going to do that on mine to make great finish. I cant wait to get it started.
@AA-zm4ow
Жыл бұрын
Use laquer thinner or nail polish with damp cloth used for polishing or detail clean wiped lightly no need to scuffled , has smooth finish , adding tiny scratches, plus, I lead sealer yes sandwich it , I used spray can either can kit to put it in aerosal , or kit that a paint company supplier dealer put in can ,, that way is cleaner saves time n money ,it's more expensive , put don't have to use electricity air compressor, gun, then the clean up in between, larger parts are different n take longer to dry for some reason ,
@Runescape.
Жыл бұрын
I can't afford a paint gun, compressor, and expensive sealers and hardeners, all I can get is rattle can adhesion promoters and krylon paints, gonna have to make due, gotta use what you have, I know its not the "right way' but that can of adhesion promoter says you can paint right over it, so thats what im going to do.
@PHARRAWAY
Жыл бұрын
Will try to do a video like that
@Runescape.
Жыл бұрын
@@PHARRAWAY i appreciate you showing the professional methods but not all of us has that luxury so i do appreciate you showing the right way with the paint guns and everything, thanks for that.
@PHARRAWAY
Жыл бұрын
I truly understand will make a video using spray can
@sendmefartvids
5 ай бұрын
Would this process work on plastic that you touch a lot? Like a door handle or video game controller?
@sallywalton5375
Жыл бұрын
Great job, but i feel it would end up being expensive, with all the different sprays. Thanks great to watch!!!
@shawn.builds
2 жыл бұрын
can you get away with using just primer + spray paint? I already applied primer but forgot to do the adhesion promoter before. wondering if it's worth it to go: 1 - primer 2- adhesion promoter (since i forgot) 3 - primer 4 - spray paint some sites say adhesion promoter should absolutely not go over primer, but others say the opposite. wondering if you have any thoughts on it? thanks in advance
@PHARRAWAY
2 жыл бұрын
From my experience no you can not add adhesion promoter onto primer will not work. But if you already applied primer you will be good
@shawn.builds
2 жыл бұрын
@@PHARRAWAY cheers brother. thanks for the response
@PHARRAWAY
2 жыл бұрын
@@shawn.builds anytime you can also send a message through Instagram at pharrawaypaint
@mikehartwick8499
Жыл бұрын
Nice video! Now I need to get a gun, compressor and a booth! You collect plates from out of the USA?
@shadowtiger2363
5 ай бұрын
Sand down put then put some primer coat then some of the chosen colour paint and some clear coat. if it peals sand down put down fresh paint and clear coat. Not many will go and bother to purchase more than 3 tins of products .😂😂😂
@UndergroundPaintKing
3 жыл бұрын
Good video bro with good information!
@PHARRAWAY
3 жыл бұрын
Thank You UPK
@jaefousable
7 ай бұрын
So if I'm painting a car that plastic and metal do I have to do this on the bumpers?
@PHARRAWAY
7 ай бұрын
yes
@jaefousable
7 ай бұрын
@@PHARRAWAY would it be ok 2 do over the whole car?
@ymfc5327
Жыл бұрын
What grit sandpaper did you use to prep?
@PHARRAWAY
Жыл бұрын
320
@Elites-asthetic
Күн бұрын
Or…… use plastikote in one go 🎉
@phillipjohn1694
Жыл бұрын
Great step by step. How much total for tools and materials if I have nothing?
@noahlong2158
11 ай бұрын
could i send you my mirror caps door handles and front fender emblems off my f150?
@tpv59
2 жыл бұрын
THANK YOU. YOU are FANTASTIC. THANK YOU sir.
@Grant7
3 жыл бұрын
Great job . & great info... as always
@PHARRAWAY
3 жыл бұрын
Thank you brother
@Ryan_Carder
Жыл бұрын
Can you do this with a rattle can?
@PHARRAWAY
Жыл бұрын
Yes
@cman5667
6 ай бұрын
Meh get some plastic binding rustoleum
@chasejones3456
3 жыл бұрын
Perfect informative video to end my Good Friday on. This will also work for interior trim and panels to correct? Happy Easter to every one on Sunday as well 🍻
@PHARRAWAY
3 жыл бұрын
Yes it will
@SNOW-zl5jp
Жыл бұрын
This is great, thanks for the content. just like others, I've definitely learnt something new here
@royaltyizloyalty
6 ай бұрын
Can you use this same process with spray paint aerosol cans?
@LiveInTheNow247
5 ай бұрын
Small correction, one coat of sealer, not base.
@stevessaws3612
3 жыл бұрын
Yes! Got my grant 7 omc fix. Even on a small part, makes me smile how flat and shiny it goes on. 👍🇭🇲
@CraigOpperman-e5z
6 ай бұрын
Why didnt you mention the grade of sandpaper you used?
@fisnikomeri7491
2 жыл бұрын
How to paint/protect chromatic paint? By the way, very good jobs 👍
@carsmoremore
3 жыл бұрын
Just now seeing this!! nice keep doing your thing my friend and stay blessed;)
@davidwilson5512
8 ай бұрын
Have you had good luck with paint staying on ABS long term. Thanks for your help
@PHARRAWAY
8 ай бұрын
Yes
@mike13543
3 жыл бұрын
2020 vehicle no warranty? Obviously u smashed it bro. U could sand down the paint and respray over it. Its already factory primed. Factory primed is dipped and I am doing this to my kia ceed 2017 in a week. Just going to mask tape the mirror. But u r obviously a professional painter. This kids is the way to do it
@PHARRAWAY
3 жыл бұрын
it has warranty but it was going to take 3 weeks to take it in I was not about to wait that long
@ricardohz5148
10 ай бұрын
Can I use the urethane primer sealer colorseal us80 the same way?
@PHARRAWAY
10 ай бұрын
Yes
@ricardohz5148
10 ай бұрын
@pharraway great. What about ep21 epoxy primer? I have half a gallon if I can use it on plastic
@PHARRAWAY
10 ай бұрын
@@ricardohz5148 it will work
@tariqnahmad
Жыл бұрын
Looks good, thanks 👍. The main thing I took from this was that it's not just the paint you need but lots of other products as well, and that paint gun.
@kibblesnbits5316
2 жыл бұрын
Need an Alabama plate?
@PHARRAWAY
2 жыл бұрын
You can email me at pharrawaypaint@gmail.com
@tjokeefe1249
Жыл бұрын
Nice video. Question that I had is what is the thumbs up? Especially for the primer? Are you looking for not too wet not too dry?
@PHARRAWAY
Жыл бұрын
Correct
@kenjoubert945
3 жыл бұрын
So rustoleum primer and plastic black gloss wont work well ?? I dont have equipment
@PHARRAWAY
3 жыл бұрын
It will
@kurtbennett1164
2 жыл бұрын
My friend, thank you for the video. Question-for panels like on the Saturn S-series, do you need to add some kind of flexing agent, and even for polyurethane and stuff like that. What do you recommend?
@PHARRAWAY
2 жыл бұрын
No you dont
@sensoryadaptation4878
2 жыл бұрын
I'm looking into painting a few ABS plastic panels on my Focus. Did you end up using any of the reducer that appears to come with the sealer kit that you show in the video? I am relatively new to this, so I am trying to figure out what the purpose of it would be. As an alternative: would the Plastic Primer they have on their site be an acceptable substitute to using the sealer? I'm applying it on ABS plastic.
@PHARRAWAY
2 жыл бұрын
Yes I did
@sensoryadaptation4878
2 жыл бұрын
@@PHARRAWAY Thanks. I was also looking at the Dupli-Color CP199 Clear Adhesion Promoter Primer as an alternative to the sealer you used. Have you had any experience with this, or do you think it would do the trick?
@bishop2355
5 ай бұрын
Did you mean one coat of sealer instead of base?
@luckyducky6534
2 жыл бұрын
How to paint a electric scooter panels it is painted pink from the factory. I want to paint it a different color. How would I do it ? Do I have to strip all old pink paint off parts ?
@PHARRAWAY
2 жыл бұрын
You can email me at pharrawaypaint@gmail.com
@rbilardo47
2 жыл бұрын
When you mention sealer, is that the same as primer. I'm a DIY'er, not familar with the terms. thanks anyone can answer this for me.
@PHARRAWAY
2 жыл бұрын
Yes but it's a none sandable primer
@johnengel8618
12 күн бұрын
Where do you get the Grant 7 clear?
@JustMike2791
3 жыл бұрын
This video has the exact info I needed, thank you very much for posting it. Just got an email yesterday saying that Grant 7 is back in stock. I will be trying it on my 06 F150. BTW, I know you know the price of paints but I don't I called my PPG store to get a quote for the Deltron Abyss Gray.....$3320 a gallon and my truck would take two, LOL. I'm sure there are way more expensive paints but WOW. I almost fell out of my chair. Needless to say, I ended up getting their Shopline and it was $1500 base and clear. It's not a show truck, so if it lasts a couple years, that's OK.
@PHARRAWAY
3 жыл бұрын
Yes it can get expensive
@integra8502
3 жыл бұрын
Tesla Model Y has textired plastic trim around wheel wells and rocker panels, can they be painted same colour as vehicle ?
@PHARRAWAY
3 жыл бұрын
Yes
@wordtruth6116
4 ай бұрын
No polish or sanding no orange peel removal?
@thelastsamurai5857
3 жыл бұрын
Hello my friend I painted my car before 6 hours I lay down the base coat every thing was super good but when I lay the clear coat suddenly only the trunk is full of reaction and fish eyes . But I am having super fun Don’t over thinking it’s just paint Passion for paint andddddd God bless
@PHARRAWAY
3 жыл бұрын
Awesome that's what it's all about
@rustythefoxcoon5143
2 жыл бұрын
Would Fiberglass be different say on a Saturn? Some of my panels are that way to save wieght
@PHARRAWAY
2 жыл бұрын
No same process
@topgunpressurecleaning8930
2 жыл бұрын
what do I use for deep scratches and gouges? Regular body filler or is their a special filler for plastic pieces. Thanks
@PHARRAWAY
2 жыл бұрын
I use evercoat putty filler
@markoraatio4124
Жыл бұрын
how coarse sandpaper should i start?
@7HEREALDON
2 жыл бұрын
Where are you located bro? Any chance you in AZ? I need a pro to paint my plastics
@PHARRAWAY
2 жыл бұрын
I. In texas
@Jrenderos88
8 ай бұрын
Is there a sealer that comes in a spray can that you can recommend? 🙏🏼
@PHARRAWAY
8 ай бұрын
Yes there is
@Jrenderos88
8 ай бұрын
@@PHARRAWAY what brand do you recommend?
@PHARRAWAY
8 ай бұрын
@@Jrenderos88 CAR-REP brand sealer
@Jrenderos88
8 ай бұрын
@@PHARRAWAY thank you so much 🙏🏼
@STUDIO-2.1
2 жыл бұрын
Hi, lov watchingd vids👍, what about painting rubber trims?
@PHARRAWAY
2 жыл бұрын
I have a video showing exactly that
@abitoffcenter383
3 жыл бұрын
Hey PHARRAWAY, forgot to mention that I got my stickers. They're much better in person! Really cool product! Thanks brother!
@PHARRAWAY
3 жыл бұрын
awesome Thanks
@mouseminer2978
2 жыл бұрын
Very nice job and clear explanation. God bless
@MrOscar108
3 жыл бұрын
Necesitaba ese video para pintar mi grill de mi chevrolet 1990 cres que se pueda pintar el cromo de mi grill?
@PHARRAWAY
3 жыл бұрын
si amigo nadamas ay que lijarse bien
@marcmatthews1128
11 ай бұрын
Will this process work on a 1981 Chevy square body for the interior plastic door panels and other interior parts? Thanks for your channel and help. Randy
@LLK-LEAD-LOCOMOTIVE-KING
6 ай бұрын
I appreciate your video, I don't know what the hell is wrong with the Internet they don't want to show nobody anything about how to protect ABS plastic, I want to use ABS plastic because it's very impact resistant and easy to mold and I use pure acetone to glue them together which is very cheap but no information on how to protect it so I can mold parts for a custom job. Thank you my friend🎉🎉❤😏😏😎
@TomSafariDust
5 ай бұрын
Thank you sharing your knowledge for a newbie to understand, I will follow your process and save so much money converting my Toyota Tundra to White storm trooper look. Subscribed 👍🏻
@Glockodile
2 жыл бұрын
Hey, this may be weird but I am planning on painting the front cover of guitar hero guitars and I was planning on doing this. If you don't mind me asking what is the sealer for, and do I need it for a guitar hero controller?
@PHARRAWAY
2 жыл бұрын
No not for something small
@Glockodile
2 жыл бұрын
@@PHARRAWAY Awesome, thank you so much!
@John-to2ki
2 жыл бұрын
Can sealer and primer be used interchangeably? I don’t know anything about painting and I have these glasses frames that I paint and it cracks occasionally because they are meant to bend a little
@PHARRAWAY
2 жыл бұрын
Yes you can
@robertbeck9159
2 жыл бұрын
I have a 99 2 door tahoe that I want to change the interior from tan to dark black or graphite grey. Any advice or steps to take to mimic factory (matte or not shiny) would greatly be appreciated. I'm new to this process so please be easy on me. Just want to make my Tahoe look awesome on the inside as if it just rolled off the lot. So any and all advice is greatly appreciated. Keep posting your videos man. Very good insight.
@PHARRAWAY
2 жыл бұрын
kzitem.info/news/bejne/lrCVqIuQfoGEg4I
@mickstermouseter7059
2 жыл бұрын
That's great! Nice job! How about on interior seat trim parts that are supposed to have a matt finish?
@dogemcmoon9644
3 жыл бұрын
Have you used shopline 2k primer surfacer JP202 as a sealer?
@PHARRAWAY
3 жыл бұрын
no I have not
@ericx7476
11 ай бұрын
What’s the difference between using a regular primer after the adhesion promoter to a primer sealer? I’m using Duplicolor adhesion promoter & I also have a can of Duplicolor primer sealer are those ok to use with U.pol power can spray paint?
@brunoburtoni8479
3 жыл бұрын
U state sealer is for better adhesion without it wont work but on another video you state its to use less paint im confused mate
@PHARRAWAY
3 жыл бұрын
yes it does the same function
@jasonwalsh9211
Жыл бұрын
Nice video...do you still need clear if doing a non metallic colour?
@PHARRAWAY
Жыл бұрын
Yes you do
@joebrown3393
10 ай бұрын
Hi thanks for video. I have couple questions do you heavily sand textured plastic like mirrors and do you sand your primer before applying paint. Also, any special instructions for tricot color paints with metallic?
@truckermick8497
3 жыл бұрын
Hey bro, do you have an email? I contacted you just before covid about painting my 379 flattop pete. Wanted to know what you'd charge? Had to put things on delay BC of covid.
@PHARRAWAY
3 жыл бұрын
My email is pharrawaypaint@gmail.com
@truckermick8497
3 жыл бұрын
Awesome, will send you pics of Pete. Thanks buddy
@elonmusk8667
2 жыл бұрын
After the adhesion promotor, can I use Duplicolor primer and paint (spray can)?
@PHARRAWAY
2 жыл бұрын
Yes you can
@elonmusk8667
2 жыл бұрын
@@PHARRAWAY Thank you for your help
@DucTaZenSurfer
2 жыл бұрын
Great video! Will this work on dirt bike plastics?
@PHARRAWAY
2 жыл бұрын
Yes
@StillSoundAmazing
2 жыл бұрын
🔥🔥 about to paint my sons cozy coupe and I wanted to go hard on it ! Thanks for the help man !
@PHARRAWAY
2 жыл бұрын
Anytime
@pabloyagani
Жыл бұрын
Great video
@SherwoodJarrett
Жыл бұрын
Can you do a video on how to paint interior plastic to restore it like new?
@PHARRAWAY
Жыл бұрын
I do have a video on that on my channel
@julyzerg1
Жыл бұрын
how to paint the hood?
@SertEngineering
2 жыл бұрын
thanks for sharing. Good job for both educational and end results.
@gregmaggert8561
Жыл бұрын
Are you using the same gun and tips for each coat of different product? Also what do you clean your gun with between products?
@PHARRAWAY
Жыл бұрын
Yes
@gregmaggert8561
Жыл бұрын
@@PHARRAWAY what gun cleaner are you using?
@CRAZYCR1T1C
2 жыл бұрын
Sealer = primer?
@pabloyagani
Жыл бұрын
Great video
@DUDE72341
Жыл бұрын
Right on...bro
@jdm132
Жыл бұрын
Great info:
@johnsmith-qz4bv
3 жыл бұрын
looks good like that color..
@mytubebobbie06h
2 жыл бұрын
Would this work with chrome pieces to?
@PHARRAWAY
2 жыл бұрын
Yes
@pacaa
2 жыл бұрын
If i use shiney black spray can, do i need to use clear coat for plastic or not?
@PHARRAWAY
2 жыл бұрын
No not at all
@pacaa
2 жыл бұрын
@@PHARRAWAY i didnt use it, but it is not shiny at all i mean it is but, not like i want to be
@philjamieross107
3 жыл бұрын
bumper covers are rubber-like it does not matter?
@PHARRAWAY
3 жыл бұрын
No not at all
@tundrawhisperer4821
Жыл бұрын
Hello, just so I’m clear. You called the primer coat, the base coat, which you mention you just need one coat of that. But then, after you painted 3 coats of the color, you mention it was the base coat too. Are the primer and color coats all called base coats then? Thank you.
@PHARRAWAY
Жыл бұрын
No it was my mistake sorry
@tundrawhisperer4821
Жыл бұрын
@@PHARRAWAY thx, all good. 👍🏻
@tundrawhisperer4821
Жыл бұрын
Is this polypropylene type plastic?
@Nintendude2013
3 жыл бұрын
What’s the difference between sealer and primer and adhesion promoter? I want to paint my exterior trim. I have scuffing pads and sand paper, I have paint, but in painting videos people have paint Guns and sealer
@PHARRAWAY
3 жыл бұрын
The sealer is primer but you don't need to sand it the adhesion promoter is used on plastic so that the paint can stick to it. If you don't use it your paint will start peeling
@Nintendude2013
3 жыл бұрын
@@PHARRAWAY i was thinking to sand it with like 600 grit since it is oxidized and bumpy maybe refine it with 1200 grit.. and then spray on primer from paint scratch brand and then spray with good quality spray cans. Is this good as a budget option? Also, if I don't sand i was thinking of using magic eraser instead to clean up my trim since I hear they are abrasive..
Пікірлер: 263