I love that you helped your little brother out with this job, even if it is a simple one. I wish I had a brother for this reason
@jayelreydomingo
8 жыл бұрын
I like how you emphasize prepping. It is a major key in what you are trying to accomplish. Great vid .
@milanmastracci
8 жыл бұрын
It really makes every difference in the world..
@Tha_Zhuk
8 жыл бұрын
painting is 90% prep
@zackwaugh2779
8 жыл бұрын
It's so true, painting it pretty hard to screw up if you prep properly
@Mykehawke
8 жыл бұрын
Major Key Alert!
@djmobn
2 жыл бұрын
@@milanmastracci do I need heat resistance paint?
@kilgoretrout4461
Жыл бұрын
You should use a plastic adhesion promoter underneath the primer. It will help the paint stick incredibly well.
@skonyc3164
8 жыл бұрын
one other important tip is to always check the paints humidity numbers. it's very important. you don't want to paint when humidity is to high or if it's to cold. I won't paint if the humidity is over 50% and if it's below 50 degrees Fahrenheit. easy way to remember this is just remember 50/50.
@wolfox2007
6 жыл бұрын
That colour totally pops under the engine bay and contrasts beautifully with the V-dub and displacement badges. Good work!
@franksalazar4576
8 жыл бұрын
Came out looking good, dude. I personally would of let the paint cure for longer before applying the clear coat, and then would of waited like 12 before touching it with my hands to avoid finger prints. But that's just the way I learned. Good work, Milan!
@joelarvell9895
6 жыл бұрын
Thanks for this example. I contacted a airbrush artist about a custom paint finish but now i know i want to do this myself.
@AnotherAverageSniper
8 жыл бұрын
Holy that looks so beautiful
@tayninh69
4 жыл бұрын
That sure turned out perfect. Nice job.
@timmytom7988
4 жыл бұрын
The best way to spray a plastic engine cover 👌 Superb finish 👌 looks amazing 👏
@jcharm6056
6 жыл бұрын
Wow you just made the engine look so much better by painting one piece!! Good Job!!
@wekivaaquatics5918
4 жыл бұрын
Thank you for this video! I followed the instructions and painted my car's engine cover two tone. It came out great!
@jackieboy3528
5 жыл бұрын
Thank you for making a step by step video, making it easy for amateurs to do this at home and save time and money.
@patmyles1988
6 жыл бұрын
Watching u spray clear coat had my OCD killing me!!!! Painting first coat should’ve been vertical then second horizontal or vice-versa ... make sure u start off the object n make a complete pass all the way across... just some tips on getting better coverage
@lancewilkins3525
7 жыл бұрын
Hello I just want to say thank you for helping me learn things about the si!! it really is helpful..now time to get to work on mines!!! Thank you
@exadoorrising1239
6 жыл бұрын
Excellent video very easy to follow instructions. Finished product looks great!
@msclecarcrzy
7 жыл бұрын
What if I'm satisfied with the color of my engine color but I want a high gloss clear? What preparations do I need to make before spraying clear on it?
@grahamdavis1821
7 жыл бұрын
msclecarcrzy same as he did with wiping with a light alcohol mix
@cnovalles73
5 жыл бұрын
LOVE the color you chose!!
@Jamk14
7 жыл бұрын
Wait would u need high temperature paint?
@Brizzle293
7 жыл бұрын
You're using VHT paint, so why post a link in products used for rustoleum plastic paint?
@xaviercuevas409
5 жыл бұрын
I would also highly recommend you cover the entire thing with some kind of box to keep dust and crud in the air that will stick onto it while it dries in between coats. The finish in the end a bit more nice doesnt look too bad here as you are far away from treed and such that can get on.
@haz_raf
2 жыл бұрын
Followed this tutorial. Painted mine purple 👌🏼
@milanmastracci
2 жыл бұрын
Great to hear! Thanks for the comment 👊
@phoenixbaird5048
6 жыл бұрын
thats sick asf , def doing my golf like this
@bleuhefner9394
7 жыл бұрын
Just started watching , getting an accord Friday 😁
@fortis619
8 жыл бұрын
Paint your cover= 20+horse power
@devilambrose
8 жыл бұрын
Putting another chopped sticker on will double that effect
@SteelEagle
7 жыл бұрын
fortis619 Setting your profile picture as a challenger... +840 horsepower.
@user-by1rn6so1x
7 жыл бұрын
fortis619 and paind your brake calipers 30 hp
@Sms68
6 жыл бұрын
fortis619 I guarantee u Used Plastic Dip on your Wheels. You kids today are Hilarious!
@jakayudha1220
4 жыл бұрын
@fortis619 modifying car is not always about horse power, you know? It is people like you that makes car community toxic.
@majedabunayyan
7 жыл бұрын
you know that your links for the products don't match what you actually used in the video which might have different end result for some people
@raptor1958
6 жыл бұрын
Looks awesome. What kind of brand primer , paint and clear coat did you used?? Where to buy it?? How long keep great paint on the engine cover without any issues?? Thanks
@milanmastracci
6 жыл бұрын
I've got product links in the description box of the video :)
@godzen22
4 жыл бұрын
Quarantine is not over so thank to you have a plan!!!!
@666Seb87
8 жыл бұрын
nice that youre using respirator for most of the time :D
@macauleyhaywood8643
8 жыл бұрын
Not that I own a car or am old enough to own a car but would you recommend using plastic dip to go over the emblems. Great video you have earnt a new subscriber!
@MGgamer1209
7 жыл бұрын
Macca_Jaspar Using plasti-dip anywhere near the engine under the hood is risky and i wouldnt recommend it since plasti-dip has the potential to melt and ruin the area its on because of the hot engine temperatures. I'd stick to using engine enamel or other high temp resistant type of products.
@misterss8778
6 жыл бұрын
Dam man you made this shiz look easy!!! I’m gettin in this project next weekend for sure
@avp0713
5 жыл бұрын
Very good. When you use spray paint.. each stroke should go PAST the piece... don't change direction while hovering over the piece, because where you change direction will get extra paint. The reason you're getting "tiger stripes" is because you're "spot" painting. Do looong strokes in each direction.
@tashriqsplnter294
8 жыл бұрын
great video bro. 1question: was the primer you used plastic primer or high temp engine primer?
@williamsmith9248
3 жыл бұрын
He did say that he used high temp paint and primer. He probably should have made that more clear.
@raja3279
8 жыл бұрын
Your videos are great, Keep them rolling!
@milanmastracci
8 жыл бұрын
Will do :)
@jrostolaza2087
3 жыл бұрын
Thanks for explaining it, you did an awesome job!!
@stinkyfungus
7 жыл бұрын
the cover is polyethylene, I have a golf. what paint are you using? not alot of things actually stick well to PE plastics.
@InFamoo
6 жыл бұрын
Wait...does this work for blue paint?
@tyseanthrash452
7 жыл бұрын
what brand of paint did you use?
@danglesdhat6122
7 жыл бұрын
this right here was very easy to follow good stuff man
@JonasGodwin
8 жыл бұрын
Last time I was this early the iPhone still had a headphone jack
@milanmastracci
8 жыл бұрын
LOL
@Kierenboyle57
8 жыл бұрын
Fdd
@alkyneytdavid7726
6 жыл бұрын
Jonas Godwin LMAOOOOO
@W1DO
5 жыл бұрын
A headphone jack? That's crazy I can pick mine up by hand.
@Ki30
2 жыл бұрын
Dope I'm doing my jeep hemi in cosmic blue color shift and painting the raised letters in mayan gold metallic then sticker bombing the center piece with nasal stickers and clear coating the whole thing hope it comes out nice lol
@Watchman797
Жыл бұрын
4:45 The paint you used is VHT heat resistant paint and the link you have is for something else
@ggabixx99
8 жыл бұрын
You are the best car KZitemr!
@XInfantryman
5 жыл бұрын
Yes, that looks good. Nice job!
@jdubb21autoworks21
6 жыл бұрын
What’s that tiny cone filter in the Make I’ve been looking for them?
@ToniaLeethesalmonmousse
7 жыл бұрын
Now thats good work kiddo looks sharp as hell great job!
@ErickHernandez-hq2cx
5 жыл бұрын
I would mask the emblems before you start sanding and while youre sanding if you mess up the tape by scuffing it up with the sand paper just remask, because when he was demasking his emblems u can see where he scratched them with the sandpaper
@brian8431
3 жыл бұрын
You forgot to mention that in order for VHT paints to actually withstand the high temperature of your engine and to activate the hardness of the paint you have to bake the paint in an oven (not your kitchen oven because of the fumes that lets off in the house) or you can use a heat gun (which takes a long time) warm it up to 200° for 30 minutes, Otherwise the high temperature aspect of the paint does not work and it will start crinkling over time. You can however cure it after it's installed on the vehicle by using these steps. Paint must be completely dry before curing Run at idle for 10 minutes Cool for 20 minutes Run at idle for 20 minutes Cool for 20 minute Run under normal operating conditions for 30 minutes Plus instead of using any old primer you really should be using VHT high heat primer and VHT high heat clear gloss.
@hass1337
8 жыл бұрын
lol the last part whit you brother was the best
@120506torque
5 жыл бұрын
Look like u use that high heat paint not just the regular plastic paint in the link in ur description so did the high heat paint work with the plastic after a while
@redlinenissan372
8 жыл бұрын
Thanks for the video, I wanted to paint my engine cover last weekend this helps (:
@djjohnson838
5 жыл бұрын
Thanks for the vid. I'll probably do mine a dark metallic blue
@annbarondick8724
6 жыл бұрын
Every once in a while i do need a good laugh, love your shop
@rozcoog3511
8 жыл бұрын
Yes i've been waiting for this!
@ramiropinon1772
7 жыл бұрын
the amazon links you posted for the pains is for Rustoleum, is that the brand you used?
@ramiropinon1772
7 жыл бұрын
paints*
@jason9414
Жыл бұрын
Prep is everything, says the guy spraying it outside!
@milanmastracci
Жыл бұрын
Feel free to donate so I can afford a paint booth 😉
@tonyjose1471
7 жыл бұрын
hey buddy nice work, finally you have changed your back ground tune
@OverlandTT
7 жыл бұрын
Don't you have a problem with heat from the engine bay causing any blistering etc?
@connorpurcell8452
7 жыл бұрын
iVlog they used high temp paint
@South_Texas_Fail
5 жыл бұрын
Not the greatest paint job, but for something that was spray bombed at home and in one day it looks damned good to me.
@miguelramirez3050
8 жыл бұрын
looks good did my eclipse and my sisters color matching the car but spray gun
@ChrisFredriksson
8 жыл бұрын
Beautiful!
@faizalbaito
8 жыл бұрын
Great vid! Question, when I bought my car engine cover was already painted. From the looks of it , it doesn't have primer. So, just wanna know how I can remove the paint?
@jdmorgan1787
2 жыл бұрын
Plz answer this question
@eabh12
8 жыл бұрын
Milan, does it matter what kind of plastic primer, paint, and clear coat we use? or will they all work just as well
@xTheT2
8 жыл бұрын
you deserve a lot more views man
@jedimasterxac6991
Жыл бұрын
Can you do this same process with the hoses as well?
@xorkatoss
7 жыл бұрын
went to a shop and asked for high temperature primer and he said I don't need that, I can just directly use the high temperature color spray on the plastic engine cover...so can I do that or did he just lie to me?
@milanmastracci
7 жыл бұрын
What kind of shop did you go to?
@xorkatoss
7 жыл бұрын
a shop with spray paints lol...
@wayne2160
7 жыл бұрын
I am Looking to do this to my 5.7 covers. But I'm looking for a very bright red is there any suggestions and what paint and Brent to get perhaps even a part number or paint code
@vaughnaraos5055
7 жыл бұрын
LT11988 A high heat paint, for example caliper paint, you will find it in just about any auto or paint store.
@omerbayrak1808
3 жыл бұрын
Color is sick mannnn. Liked it and will do it same
@keqcy9806
10 ай бұрын
Can I use primer for my first coat then high temperature spray paint for my final?
@zhaiken6607
6 жыл бұрын
What if the engine cover was made of metal, would u still need to sand it down first?
@abdurrahmannurdin9156
4 жыл бұрын
other than alcohol..can i just use a dish soap to remove the dust?
@dustin8605
2 жыл бұрын
So do you need any special paint like heat resistant paint?
@americanpanzer4163
7 жыл бұрын
Will the painted engine cover fit in my honda
@vincentpetak6537
Жыл бұрын
Would the same process if I wanted to do accents for my rims or is there other steps as well?
@dimitriyg6208
2 жыл бұрын
Hey quick question. How many coats of clear coat do we do and which paint brand do you recommend??
@rubenr7650
8 жыл бұрын
how would I take paint off so i can do it like the video if I already painted it but it didn't come out as good as the one on the video?
@jeremypinder4436
3 жыл бұрын
i just want to paint my engine cover and fuse box cover my air filter cover the hose from the air filter to the throttle body a nice bright yellow color all those parts are hard plastic parts i'm tired of seeing them that black color i want to see the engine bay a bright yellow color can it be done and so i need a clear coat?
@ChildrenOfFable
6 жыл бұрын
Is this happening only to me or?? When i painted my engine cover i have some bubbles on it...but i sanded it like u said and followed exact proccess like you did...what i need to do to make them dissapear
@white9th193
4 жыл бұрын
If I didn’t sand mine but used THV primer and then THV red color will mine b ok ? Or should i remove paint , sand and redo ?
@darkknight4539
5 жыл бұрын
Hey great video! Short and to the point!
@JMNTN
6 жыл бұрын
how is it holding up, i know it's high temp paint but i still would assume the paint will crack with all the heating up and cooling down thus expanding and shrinking of the plastic
@Spicymuffin
3 жыл бұрын
Guaranteed to crack. Done mine a year ago and lots of hair line fractures. Paint is still well stuck though😁
@MrSyrusthegreat
2 жыл бұрын
What is the best paint marketing name for heat resistant to paint engine plastic rubber pips and other plastic surface parts like engine cover for example? Would appreciate it if you advise please
@dg11306
5 жыл бұрын
Looks great thanks for sharing.
@jponz85
10 ай бұрын
Does this work with engine covers that are not plastic?
@filipneagoe9267
4 жыл бұрын
On PlastiDip can be applied any coat or just a special one?
@RYZINAP
8 жыл бұрын
Hey sorry to bother you but an engine light came on on my golf, I reset it and it showed up around 250 miles later, code P0401, I know it probably just a carbon filled EGR but what tools altogether would I need for it? It's a 2005 mk 5 Golf and I need it quickly, I don't have time to get it done by a mechanic my nearest mechanics take days for an oil change, so any help would be appreciated thank you.
@GMWsho
8 жыл бұрын
oh boy, is looks good!
@a11ua32
5 жыл бұрын
Thank you! Very informative videos
@OlympicGaming
8 жыл бұрын
that was one thing i hated about my "limited" version of my Monty. the 3.0 engine has a nice cover but the 3.5 doesnt. so nothing to mode there :/
@xbpete8865
5 жыл бұрын
Any problems with little bubbles from the paint not sticking?
@chharlorakim7346
4 ай бұрын
Great video !!
@hernanhernandez2735
8 жыл бұрын
Hey I have a saggy headliner on my car that just happened over night. It's half of my golf that is saggy. How can I fix this?
@Julian-do7bv
5 жыл бұрын
Looks great
@mowrx7558
8 жыл бұрын
Im new on paint so what type or brand paint should i use ??? And what u mean plastic paint ???
@jaysiddle2943
4 жыл бұрын
Was that plastic primer or just standard? If it’s standard it will lift in Tim.🤔
@giuseppedimarco4212
5 жыл бұрын
I put 3 coats of primer. How long after you put the primer n dry did you put the color paint?
@rocky04006
7 жыл бұрын
Good job guys👏🏻👏🏻👏🏻👏🏻👌🏻👌🏻👌🏻
@Ericcssonn
5 жыл бұрын
Don't stop and start spraying already on the object to be painted.. Always start and stop outside of the area to be sprayed. Even if it feels wasteful, the paint job will be better with less orange peel on the clear as well...
@khalidmalik3163
7 жыл бұрын
well dude this was very helpful video , but I was ask can we paint aluminum engine cover too ??
@connorpurcell8452
7 жыл бұрын
khalid Malik yes
@jonathansarmiento9099
5 жыл бұрын
What brand of paint should I use to paint my engine cover, I am not familiar the one describe in the link below... Should I use a high engine paint?
Пікірлер: 351