How to pair your Smart Wi-Fi indoor PTZ camera to the Nexxt Home app.
Open the App.
On the “All devices” screen, tap “Add device” or click the “Plus” symbol on the top right corner.
On the next screen, scroll down and tap the “Smart camera” icon.
Follow the instructions on the “Reset the device” screen:
Turn on the camera and wait for the light status indicator to start blinking or until you hear a prompt tone, indicating the camera is in pairing mode.
Click the “Next step” check mark to confirm and tap “Next” below.
Select your 2.4 GHz Wi-Fi network, confirm the password and tap “Next”.
Scan the onscreen QR code with the camera, no more than 15 to 20 cm away from the lens.
A tone will prompt.
Confirm by tapping “I heard a prompt” below.
Wait a few seconds for the application to pair with the camera.
Once the device has been successfully added, you can click the pencil icon to the right to assign a name and a specific room for your new camera.
Click “Done” to save the changes and then tap “Done” again to enter the camera´s main interface and start setting it up.
With this, you have learned how pair your Smart Wi-Fi indoor PTZ camera to the Nexxt Home app.
Негізгі бет HOW TO PAIR YOUR SMART WI-FI INDOOR PTZ CAMERA TO THE NEXXT HOME APP
Пікірлер: 1