To flush the fluid, drain and over fill the auto a bit, undo the return line from the fluid cooler, put a clear hose on that to a bottle, idle the car in R D and N a bit, stop every now and then to top up the fluid in the trans, then repeat until fresh red fluid comes out of the return line, reconnect the return line .. this will change every drop of fluid. Then use the second "full level" drain plug when warm/at idle to determine the correct fluid level ( you need to over fill it and drain it to the level on that second "drain" bolt) dont let the trans run too low on fluid
@PERTHSCOOTER07
8 ай бұрын
Good advice there. Cheers
@jessejamesbaumbach
Ай бұрын
Do you need to clean the filter and magnets to do a proper job?
@jessejamesbaumbach
Ай бұрын
Your video states transfer case oil flush except your changing the gearbox oil?!
@richmondparungao8171
5 ай бұрын
Hello sir may i ask the part number of transmission filter thanks
@PERTHSCOOTER07
5 ай бұрын
Hi. I’m not sure. You can buy aftermarket from most parts suppliers. Or you can buy genuine from Mitsubishi or somewhere like Partsouq using vin number for reference
Пікірлер: 6