To See More Metal Working Vidoes Click Here - kzitem.info/door/PLR2sCST9I1dxFFqaCDzs6rvoLnRxaM8UO For More Wood Working Videos Click Here - kzitem.info/door/PLR2sCST9I1dy9DHM9zsxiRKrbQ4_TgZKk
@fishmut
4 жыл бұрын
Any pallet pry bar that works and gets the job done gets my vote. 👍
@BuildStuffwithAJ
4 жыл бұрын
Amen to that! I did one by hand and decided I needed to build something to make it go faster lol
@fishmut
4 жыл бұрын
Build Stuff with AJ ..the only issue with pallets here in Australia is a lot are made out of pine and rubbish wood so a lot ends up being kindling fire wood in winter , the boards that are good make some handy garden beds,work benches, and heaps more so I love the pallet pry bar it beats the hammer and jimmy bar any day .👍
@BuildStuffwithAJ
4 жыл бұрын
@@fishmut year slot of the pallets I come across are made from the same rubbish wood. Every now and again I come across a hardwood. But not too often
@Fbiking40
Жыл бұрын
Simpler is better !!!! 👍👍👍👍👍👏
@eddydirtville
Жыл бұрын
Hey, just found your KZitem video just subscribed great video just made this exact 1. Thanks so much, i started busting out pallets in no time. My 5yo grandson helped & loved it. Now i need to make 1 his size😂😂😂
@BuildStuffwithAJ
Жыл бұрын
I am glad I could help!
@robmyers4046
2 жыл бұрын
Gday AJ I looked at all the designs on KZitem and yours is by far the best Love how you made out of scrap Subscribed now got a fan for life Cheers Rob 🇦🇺
@BuildStuffwithAJ
2 жыл бұрын
Thank you! I'm glad you liked the video and I hope you end up making one for yourself! Thanks for the support!
@Grumpyolegrunt
2 жыл бұрын
I’m building mine tomorrow! Thanks! Great video
@BuildStuffwithAJ
2 жыл бұрын
Awesome let me know how it goes!
@Grumpyolegrunt
2 жыл бұрын
I used 1” square tubing and it works great!
@bbruuse
2 жыл бұрын
i used old truck leaf spring to make a pallet tool...which at first worked wonderfully then "Ting" the leaf spring snapped right near the weld, I re-welded and re-enforced... once i came near a hard pallet, it snapped the steel spring again,,, so this time going to use thicker steel, I aready have a quad bar wrecking tool which works wonderfully, but it breaks a lot of the wider pallet slats. it also is short whih causes back strain... it has a nail remover built in which is Funderfull
@sloopycat1954
2 жыл бұрын
It's a beast pallets will be bricking it.
@BuildStuffwithAJ
2 жыл бұрын
Yes sir it's a beast! Let me know how your build goes
@lexiemn
4 жыл бұрын
Very nice job! I think I will have my nephew make me one. Love using pallet wood!
@BuildStuffwithAJ
4 жыл бұрын
Its definitely one of the cheapest sources of wood
@minimotor4256
3 жыл бұрын
your design is better i like it goodjob
@BuildStuffwithAJ
3 жыл бұрын
I'm glad you liked the video! Thanks for the comment!
@ANTONIOcarpintero
3 жыл бұрын
I saw different designs (videos) and i like yours. Looks simple and it works. I'll built it! Thanks for share it.
@BuildStuffwithAJ
3 жыл бұрын
I'm glad you liked the video! Let me know how it comes out! Thank you for the comment!
@steowens7690
4 жыл бұрын
I’m in the shed in the morning I’ve got the scrap hanging round thanks for this video
@BuildStuffwithAJ
4 жыл бұрын
I'm glad you liked the video! Thank you for the comment!
@mundlkalli4396
4 жыл бұрын
Nice job...I have seen a few on here ,but this one seems to be the best so far....it looks very powerful . Wish I had all the tools to make it myself....especially the welding part. Thank you for the nice demo.
@BuildStuffwithAJ
4 жыл бұрын
Yea it definently helps to have the tools. But you can always buy a pallet buster on Amazon, there is a link in the description of the video. Next best thing to making one yourself. I'm glad you liked the video and thanks for the comment!
@vaclavmarek2532
Жыл бұрын
Super nářadí, kdyby se to tak dal koupit v Čechách
@ServingFromMyHome
6 жыл бұрын
Great job AJ! I always look forward to your videos.
@BuildStuffwithAJ
6 жыл бұрын
Thank You! I'm glad you ejoyed it!
@varosolo78
4 жыл бұрын
Amazing job
@BuildStuffwithAJ
4 жыл бұрын
Thank you!
@HopeThisWorksOurHomestead
6 жыл бұрын
great job AJ. I haven't built one yet, but it is on my list!
@BuildStuffwithAJ
6 жыл бұрын
They are really handy! This is the first one I've used and it only took 5-6 mins to tear that pallet apart. The last one I tore down took about 30 or more mins and alot of the boards split.
@florianzarallosilva9388
4 жыл бұрын
@@BuildStuffwithAJ ...
@antoniopascual6215
2 жыл бұрын
@@BuildStuffwithAJ qaaaaaaaaaaaaaÁ
@riteshahir7192
4 жыл бұрын
Very nice
@BuildStuffwithAJ
4 жыл бұрын
Thank you! I'm glad you liked the video!
@andrewsands3816
5 жыл бұрын
Great video mate, keep up the good work.
@BuildStuffwithAJ
5 жыл бұрын
Thank you! I'm glad you liked the video! Thanks for the comment!
@rowenlarsen
3 жыл бұрын
I enjoyed watching the project but could not overlook the fact that you were using your Craftsman Table saw for a welding table. Wow- what kind of a man would do that?
@BuildStuffwithAJ
3 жыл бұрын
Hahah, The kind who doesnt have another table that isn't made of wood lol.
@sumosprojects
6 жыл бұрын
You’ll get tons of use out of that, I had to reinforce mine but it’s all cool now, great video buddy 🍻👍👍👍👍
@BuildStuffwithAJ
6 жыл бұрын
I've already got my next couple projects lined up! I love the idea of free wood, and this pallet buster makes it a lot easier to break them down!
@pauldeanda4985
6 ай бұрын
The only issue is that I see is the 45 degree angle handle. It will make you bend over more when prying. Perhaps, a 22.5 or 15 degree angle would be more suitable, if you really want an angle on your “pallet buster”. 🤷♂️
@BuildStuffwithAJ
5 ай бұрын
That might help out, But honestly mine works pretty well like it is, My only problem with it is how heavy it is lol. It comes in handy sometimes but after using it for a while it wears you out lol
@pillh8833
3 жыл бұрын
exelente !!
@lancerudy9934
2 жыл бұрын
How thick is the angle iron?
@BuildStuffwithAJ
2 жыл бұрын
its been a while since i used it, but i think its 1/8" thick
@JohnNy-ni9np
Жыл бұрын
Dimensions and metal thickness please. Can yours withstand the tough near hardwood pallet ?
@BuildStuffwithAJ
Жыл бұрын
All the dimensions are in the description of the video as well as links to the tools and materials you can use. And yes I have broken apart a lot of hard wood pallets
@michaeljamesreed9054
2 жыл бұрын
Awesome video. Wish I had one of those, but I don’t do metal work. Can I buy yours?
@BuildStuffwithAJ
2 жыл бұрын
Sorry mine isn't for sale but it's definitely heavy duty lol
@darlioliveira109
4 жыл бұрын
Ok. Nota 10
@dougmittleberger8802
3 жыл бұрын
Looks like you need to use a gas shielded wire gives you a cleaner weild
@BuildStuffwithAJ
3 жыл бұрын
Yea, the welder I've got is pretty cheap flux core welder and has alot of issues, I wish I had a good mig or tig set up, I could sure get alot of use out of them. But its what I've got to work with for the time being.
@williammoore2259
5 жыл бұрын
Did you use a mig welder or a flux core that bill nice work
@BuildStuffwithAJ
5 жыл бұрын
It was a flux core welder I used, I would much rather have a good mig set up though. They do a lot better!
@shermanhofacker4428
3 жыл бұрын
Nails stay in the stringers because of the type of nails and kind of wood; NOT the tool used to lever the boards apart.
@lancerudy9934
5 жыл бұрын
How many hours did it take to that tool? Thanks
@BuildStuffwithAJ
5 жыл бұрын
Honestly it didn't take very long, but I work with metal every day so that makes a difference. It might have taken me 2 maybe 3 hours. It Honestly took longer for the paint to dry than it did to build it lol
@stevekozlowski969
3 жыл бұрын
Hey are you sheet metal worker i seen the logo on your shirt . I used to work for local in the state of Michigan
@BuildStuffwithAJ
3 жыл бұрын
Yes sir I am, local 110 in Kentucky
@havefunbesafe
4 жыл бұрын
First step; become a welder 👨🏭
@BuildStuffwithAJ
4 жыл бұрын
You dont have to be a pro to get the job done on something like this, you just need access to a welder and a little practice
@RED_PARTIZAN92
3 жыл бұрын
the best option for making a device. Greetings from Russia!!!
@BuildStuffwithAJ
3 жыл бұрын
I'm glad you liked the video! Thank you for the comment! I'm glad to know my video has helped someone from across the world, Greetings from USA!
@melinabastida4308
4 жыл бұрын
n espectaculo amigo.. saludos desde argentina sos un genio.. me encanta la prolijidad
@BuildStuffwithAJ
4 жыл бұрын
Me alegro que te guste el video. saludos desde américa y gracias por el comentario
@roscocsa
5 жыл бұрын
Is it bad that I have screw envy from your saw insert? I can't find that stupid thing anywhere.
@BuildStuffwithAJ
5 жыл бұрын
Well the saw insert is pretty important so u dont blame you lol
@roscocsa
5 жыл бұрын
@@BuildStuffwithAJ I need to discard it and come up with some jury rigged thing with a bs riving knife I suppose. Or buy a saw that costs more than 35$.
Пікірлер: 71