Why do I see paper tuning all over the internets but as soon as you step in a shop they look at you like you’re wasting everyone’s time.
@andrewkelly6909
10 ай бұрын
90% of shops are run by know it alls or d bags that think the consumers aren't supposed to know anything about tuning because they are "supposed " to do all the work.
@NoMomYoureWrong
10 ай бұрын
Because a lot of people who walk in don’t have consistent enough form for it to make any difference in a tear. That’s why they set it up off the center-shot and recommend mechanical broadheads.
@davidfleer5307
10 ай бұрын
Because a lot of people don’t want to take the time to learn just grad their bow and wound a animal and if it doesn’t die they blame it the bow and go and spend a couple thousand and the bow shops look at us and say I’m too busy you can leave it here and I might have it done in a month, so who needs our money Spokane Archery gosh that’s 20 hours from me 🤷🏼♂️
@newzealandspotlightersasso9181
10 ай бұрын
Because you can paper tune at home, firstly you get humbled when you try to paper tune as it shows people's inconsistencies in their grips. Better to learn that at home.
@humanperson4132
10 ай бұрын
The difference between a bow shop and a pro shop
@CoachGoodwin23
10 ай бұрын
Josh, thank you --- great vid. I always learn when reviewing your content! I like working on my own stuff and your help is greatly appreciated!
@josephfolsom2030
10 ай бұрын
Working on my new Phase 4 29”. Bought the tophat kit from you. I had a point left tear. Switched the existing tophats, still a 1/4 - 5/16ths tear. Now I’ll go with the next larger set to move that cam more to the right. Appreciate your simple tutorials. Hunting season starts here in Oregon on Sept 2. 🤪. Got a late start with my bow since the bow with all the accessories was a gift from my son who bought the same bow. My kids like me
@elliotswan7339
10 ай бұрын
I've been waiting for someone to make a video explaining paper tuning with cams for a lifetime. Thank you MFJJ.
@MostlyPeacefulCombatVet
10 ай бұрын
This is precisely why I’m shooting Bowtech this year. Such an easy bow to tune! Thanks for the Video Josh Jones
@michaelswenson8399
10 ай бұрын
Great info as usual. One note, if you have a bow that uses shims/top hats you might find that you are between sizes and have to move the rest ever so slightly to get that bullet hole with a bare shaft. Just a couple clicks on a micro adjustable, I can barely see it move with my naked eye on the Epsilon but it affects flight.
@user-iu4lw5vz7h
6 ай бұрын
I was struggling to get the right tune on my Bowtech SS34 and Rekoning by moving the rest - followed this and in a half turn on each set of cams and now getting a perfect bullet hole. Thank you!!!
@mjc_208
10 ай бұрын
Keep these awesome short videos coming! Thanks!!!
@Futurase1
10 ай бұрын
2/3's of everything I have learend is from Josh on bow setup and tuning. Thanks again the information is extremely valuable!!!
@user_unk5
10 ай бұрын
You're a GENIUS!! This is why I always look forward to watching your videos, you're always so informative!
@mikemitchell9157
10 ай бұрын
Whats genius about it. He never came up with this way of tuning. All he is doing is showing how to tune. And this is how you always tuned a bow in a shop. Even before movable cams you would twist the cable yoke to induce cam lean to tune the bow. This is just informative for those new to tuning their own bows
@timsilva6057
4 ай бұрын
Great video Josh! Much appreciated!!
@chriswarfield9896
10 ай бұрын
Keep it up!!! I really enjoy the content you put out. It has been informative and helpful.
@adamryerson2974
3 ай бұрын
Thank you for this and more. I ended up needing to learn this on my own through trial and error.
@greywolf1606
10 ай бұрын
Thanks for sharing Josh. 🏹
@Thedudeabides803
10 ай бұрын
Bowtech has a leg up on the competition. Look how simple this is to move the cams. The reason I left my Mathew’s dealer was he didn’t believe in paper tuning. He lined up everything by eye and said if it’s accurate at 20 yards that is all you need. Without people like you, I’d still be having bow issues.
@PennNative
10 ай бұрын
Josh, I know you made a grip video. But you need to do another. Maybe more In depth. Take a guy who has a bad grip. Shooting through paper, work with him on camera and show how much the grip effects tuning. It is so huge and such an underestimated point! It’s the biggest key to all this. The grip needs to be buttoned up even before one tries to tune and shoot through paper. It’s such a key element and it’s not gone over enough.
@douglasvaughn9530
10 ай бұрын
Great video and I agree that moving the CAMs is much better than moving the rest. It will make your bow shoot better and be more forgiving. Only move the rest for micro adjustments. Never more than 1/16" out from recommended center shot in either direction. I do wish you would say cam lean instead of wheel lean. Wheel bows are a thing of the past. I guess there are still some single cams with idler wheels but very few. One more suggestion, I think you may confuse people when you say point right or left instead of nock right or left. You are the only person I've ever heard talk about point direction or wheel lean.
@gawgum
9 ай бұрын
So I have an Elite omnia and had right tears (point left). I had that bow all jacked up. Finally just swallowed my pride and took it to the bow shop. Just to find out I was torquing my bow....yeah that just to find out I need to work more on me than my bow lol. $60/labor lesson learned. But now I'm hitting dimes @ 80yds. Ok maybe not every time but once in a session at least. Thanks for all the helpful videos Josh. They are a real help for me since I just got back into bow hunting last year after almost 30 yrs.
@SeaPro360
Ай бұрын
Stick white golf tees in your target. Cheap and last forever.
@perryknetter8577
10 ай бұрын
Thank you for sharing this great information 👍
@davidfargen2167
10 ай бұрын
Great video you mentioned how tuning elite with the SET system is not as efficient as using its shim system I was wondering if you could do a video on how you would tune a new elite and more in-depth on why the set system is not as good
@less4734
10 ай бұрын
Agreed, I would love to see that also. I own 2 Elites with the SET system and would love to know more.
@huntsimple9527
10 ай бұрын
This is super simple. Does not matter if you are right or left handed. Move the cams the direction of the tail tear. Done.
@joeodonnell4188
4 ай бұрын
Hey Josh. Been a fan for a while now but haven’t gotten to all of your videos. I may have missed it but I think I’m not the only one who would love a video of a start to finish full setup and how to do it all. (Bow selection and build, tuning, arrow selection and build, etc) if u already have one I apologize. Thanks
@davidoneill615
4 ай бұрын
Hi Josh - I enjoy your videos. With the Bowtech Deadlock system you are not inducing CAM lean as you mention in your video. With the old CAM system, with the yolks, you twisted strings to impact CAM lean. With the new Deadlock CAM system you are moving the CAM along the axle to position the energy directly behind the arrow. The system is specifically designed to tune your bow without leaning the CAMs; you just slide the top cam and/or bottom cam over to take out tail left and tail right.
@the_sharp_carpenter
3 ай бұрын
It also affects lean, as it shifts the tension of the system lant and right between to load bearing points. You're also pulling the cables more or less relative to the roller guard. The cams will lean more at either end of the travel than they do in the middle. The axel is like a barbell thats loaded evenly, if you grip it in th center it stays level, if you shift left or right the "axel" or barbell will tip off of level, as one side gains more leverage over the other. With yolk tonight you're keeping the cam central and "adding more weight" to either end of the barbell. They both change the plane of the axel. Yes yolk tuning leans it more aggressively but they lean the axel weather or not that's that's the desired intent.
@craigg350
10 ай бұрын
Love the bow. You can't beat a bowtech for tuning!
@maplehappy
10 ай бұрын
MFJJ, I love this video, it really shows how adjusting the cams can tune the bow. Here's what I would love to see, a video demonstrating WHY moving the rest out of center is bad or how it affects your impacts or groups or tune or whatever. I've always tuned my bows by bumping the rest, and out to 100 yards i dont have any weird left or right variance or anything. I'm very intermediate though, so im just working off of what has worked the best for me. I've never had to move the rest super far out of center, so maybe only extremes make a big difference? Exactly the kind of answer i'd like to see and MFJJ is the man to do it. Please! and Thanks!
@jhuntley575
10 ай бұрын
I can answer that for you if you want.
@WS_00
4 ай бұрын
@@jhuntley575 I’d like to hear your answer 👍
@royhoglund1322
10 ай бұрын
Making tuning look easy! Keep the videos coming. You might want to mention that all other things need to be right before this step, like bow specs, timing, and arrow spine.
@user-ne8jn1pq4d
10 ай бұрын
More quality info for the average Joe to learn to work on their own equipment. Much appreciated. Quality shops are few and far between. Learn to work on your own stuff.
@richardganz9318
10 ай бұрын
thanks again for a great video
@TheDweebert
6 ай бұрын
Great video, thanks! New subscriber here who just found you guys a couple of weeks ago...love your channel! Might be a dumb request, but a video about your paper tuning rack would be awesome. I built one out of PVC, and it's not great. Would love to see more detail on your paper tuning rack build.
@harveyrousejr.2069
5 ай бұрын
Great, useful video content.
@dimitriwessendorf2391
10 ай бұрын
Nice video MFJJ. I liked the way you explained tuning. I’d really like to see how you can do this on a Hoyt bow. I’m always afraid to touch anything on my bow! I’m worried I’m going to screw it up.
@user-eo9uj7hd9v
10 ай бұрын
Sometimes the rest has to be moved. When you work with shims or top hats, you only have widths to work with. If grip and tune fall in between, then a small rest tweak will finish it up.
@pfv3462
10 ай бұрын
hi Josh, great vid. can the adjustment of the arrowrest influence this adjustment of the cam?
@brettwelch8368
10 ай бұрын
I was suprised at how much smaller the 2nd tear was than the first. I got lucky with my bow and wheel lean was spot on right from the factory.
@newteqcreations
10 ай бұрын
Great video
@billhemphill1243
7 ай бұрын
Really appreciate video! I would like to see with Mathews top hats
@arrowflinginop
10 ай бұрын
A video on how to do this for a bow with a single yoke like an older Hoyt would be awesome.
@lewiskurzawa6041
10 ай бұрын
Great info
@scottbergan5608
13 күн бұрын
Josh have a question for you if you get your bow paper tuned properly Will your site pin A directly overtop of your arrow shaft Hopefully I'm asking the question properly I'm assuming string Wheel riser rest site All to be in the same line of sight Keep up with the videos I've been learning a great deal from you
@jeffreyenglebert9016
10 ай бұрын
Please make a detailed video on setting 3rd axis. Black Gold first up please. Which way to turn each adjustment screw.
@user-hw3gf5yq7b
10 ай бұрын
Hey Josh, can you show how to adjust cam lean on old bow, I like how you tune all the newer bow, but some of us have older bow, great videos
@reddawng43x91
10 ай бұрын
Twist /untwist the yoke
@clintonmoore1070
10 ай бұрын
Would you use the deadlock to broadhead tune or just the rest because the adjustment needed is so minute?
@gmatthewpaul
2 ай бұрын
This is why I have 2 new bowtech bows… I own a press but this is best way to tinker.
@adamhalcom1608
9 ай бұрын
Would like to see a video on using the new pse system and see what difference it will make in comparison to the bowtech system
@thegun8240
10 ай бұрын
Make a video on how u would adjust the cams for bare/Broadhead tuning.
@chengsterboi07
10 ай бұрын
I think doing another video for broadhead tuning for the deadlock system would be a great video.
@pfv3462
9 ай бұрын
Hi Josh, Can you clarify for me in which cases you are going to adjust the arrow rest of the bow? After you have adjusted the cam lean.
@billjones9708
10 ай бұрын
Josh so I shoot bowtech as well and love them for the tuning capability. My question is, after I've paper tuned a bullet hole, I usually walk back or French tune. If I'm shooting a bullet hole but then need to adjust for right or left grouping on my vertical line, should I worry that it throws my paper tuned off or should I just go straight to broadhead tuning after walk back tuning?
@joeditz48
8 ай бұрын
IMO, Paper tune is just a start. In the end we care about groups being centered no matter the range, not what paper looks like
@jhoch3346
10 ай бұрын
Id b interested in watching a video on how you made your paper tuning set up. Looks a lot better than most peoples. I have used a buddy's paper tuner n it sucks
@wadefarley6633
10 ай бұрын
MFJJ, You have done the wheeling videos before using a draw board while having the bow at full draw using the Spot Hogg laser tool. Do both of these processes accomplish the same thing? I know in your bow build videos you do the draw board wheeling method and verify it is correct by shooting through paper. Does this way accomplish the same thing? Is one method more precise and accurate than the other? I feel the draw board method would be more precise but have never had the chance to do it that way and no shop will ever do it that way either. Look forward to your response. Thanks!
@soundsofhope711
10 ай бұрын
Can you explain cam shimming bows with the split yoke like older Hoyt PSE and bowtech? Yoke first then shims? Shim and yoke together? I tried to add some twists to my right yoke and got bullethole but I had to still keep rest out of center . I would like to know best way to shim cams once yoke adjustment has been maxed.
@bfittock
10 ай бұрын
thanks for sharing could you do one tuning with split buss cables like the pse or Hoyt hybrid. Yoke system thanks
@robertduell4511
10 ай бұрын
Any chance you’d run through tuning a budget bow like a Diamond edge 320 hint hint.
@jarredrush9544
9 ай бұрын
For a minor tune on a Mathews would you do the top, bottom, or both cams?
@taylorconlon144
10 ай бұрын
The Mathew’s score in the background. 🤣 0:21
@stevepav8604
4 ай бұрын
Can you do a video on how to move a PSE EVL wheels ?
@5jjt
10 ай бұрын
Should we tune for a bullet hole that will occur at any distance from the paper?
@critter852004
10 ай бұрын
There is a reason I own multiple bowtechs. My shops in the area (2), won’t assist with tuning at all. So, being able to do it on my own with deadlock system.
@justmeva
10 ай бұрын
Question - what if you don't have any of these bows or the options of adjusting the cams as freely as you demonstrated?
@reddawng43x91
10 ай бұрын
Twist/untwist the cables
@falconsjavlin
3 ай бұрын
with the cams to e.g. to the right, so is the string relative to the centre shot at full draw? Does that mean the nock travels from full draw to brace from the right to the centre, and then the nock continues to overshoot with that momentum to create a tail left tear?
@loganwarren3453
10 ай бұрын
Can you do a video on how to broadhead tune with the deadlock system instead of moving the rest?
@michaelcolthart4006
8 ай бұрын
It’s the same thing. Tail left tear will cause the BH to plane right, tail right tear will cause the BH to plane left.
@afireinside33110
10 ай бұрын
My bow has a yoke system, I'm guessing by putting twists into one side or the other would do the same as shifting the cams?
@victormastrucci4103
10 ай бұрын
Question I recently picked my Bowtech solution SS up from my local dealer. When I shot through paper it shot tail right, about half an inch. When the Bowtech rep shot my bow it was perfect bullet hole. He said it’s my form. For me to shoot a bullet hole I have to grip my bow pretty firm and twist my wrist to the left. I am not sure if it is completely repeatable. Should I continue to shoot this way or tune my bow to my shooting style, which apparently has the bow slightly turned to the right.
@davefisher5196
10 ай бұрын
You shooting in front of the shop tech might have something to do with it. After I blew a big hole to the left the tech shot a perfect hole. I told myself to relax and did the same
@victormastrucci4103
10 ай бұрын
@@davefisher5196 I went home and did the same thing. I can make it shoot a bullet hole but I don’t feel like it’s repeatable. If I hold it with a light grip I get a consistent tail right tear. Might be over thinking it but to me it doesn’t look like perfect arrow flight. So just curious if I should chase the grip or chase the tear.
@maxstambaugh
10 ай бұрын
Could you do a quick video on how to do this on a Mathews Atlas please and thank you
@SomeGuyFromOK
10 ай бұрын
Dude, what release is that? Is it a thumb button with a click in it? I NEED that NOW.
@brianmalick2946
Ай бұрын
Wont you still have to move your rest for up and down adjustments?
@ethanhiggins4268
10 ай бұрын
I waited until the end to ask to make sure I didnt miss it lol. On a mathews for example, do you need to change the top hats on the top AND bottom cam? In essence, whatever you do up top, you need to do to the bottom? Or are you just trying to get them to line up/create a bullet hole
@hoganfan2006
10 ай бұрын
Good question. Do we pursue the paper tear perfection or should there be little or no cam lean then adjust the rest/cables/top hats/etc.?
@steveirving1
5 ай бұрын
Is this the same as a cam leaning to the left or right?
@HuckFTW
10 ай бұрын
2:11 “this did have a clean hole, before I just jacked it all up” 😂
@heathatkinson9491
9 ай бұрын
what bout a single cam bow with no real cam adjust ment would you turn yoke string to correct cam lean
@Nowhy
10 ай бұрын
I am new to archery and tuning, someone might have a suggestion for my process? What can be quite a quest is paper tuning and bareshaft tuning coming together. It can be quite the either-or, especially if the paper tuning says one thing and the bareshaft the opposite - and then again, the arrow tuning and nock tuning.. I choose to use an arrow that is the straightest, nocktune my bareshaft so that both make bullet holes at 5 yards (standard 7/8 rest as said in the manual with the Elite verdict with limb/cam adjustment - I tried 13/16, but the visual method with a second arrow to the riser looks crooked), then go bareshaft tune both (via the rest) with multiple shots to be close to an inch at 18 yards and call it a day. I might go further away in the future, but then again, most of my arrows are not really straight (Skylon Empress or Empror)...
@Nowhy
10 ай бұрын
I should add, after bareshaft tuning, I go check again for papertears and as long as the tear is just a tad nock left or nock high (Levi Morgan has an old video about that), all is fine, but if it isn't, which wasn't the case yet, I would go back to tinkering with the limb/cam lean stuff from Elite.. still working on my form and anker point anyhow...
@aaronhall765
10 ай бұрын
Ok you playing with my emotions 😊. No mention of bow giveaways? Are they still going? You mentioned August.... I'm still waiting on that phone call.... You could bring it to Oahu Hawaii, stay with us and go to the beach after we set the bow up🎉😊😊😊😊
@MrKawasakirider10
10 ай бұрын
If you are looking for more video ideas. Showing how to build a draw board for your bow press would be a nice bit of info
@sorenjackson4768
10 ай бұрын
i’ve always had this question about moving the cams/shimming, etc. and wheel lean: what do you do when the cams ultimately need to have significant wheel lean in order for the bow to tune through paper? For example, my Mach 34 shoots great through paper, shimmed at, .140 on the right and .080 on the left. But in this configuration, with the spot hog laser tool, my wheels, both lean toward the cable rod about 3/4 of an inch off of each other. I can decrease that lean by shimming the cams in the opposite direction but then I get a terrible paper tear, of course. Shimming to get the good paper tear, I could then use the yokes to change the strain on the cams, but they don’t move the cams very much on this bow. In this situation, I often ask myself: What would MFJJ do. I’ll resist the temptation to start selling those silicone wristbands with WWMFJJD while I… pray for an answer?
@Ben-sn4cn
10 ай бұрын
Same question!
@hoganfan2006
10 ай бұрын
Same question here too. Lots of cam lean, but bullet holes.
@reddawng43x91
10 ай бұрын
Move ur rest
@BJC406
Ай бұрын
@Podium Archer FMJJ, can you tell me how this method is done on the Bowtech 82nd Airborne that I am still shooting?
@marcuselliott6905
10 ай бұрын
Can you do this on single cam bows too like a PSE stinger max?
@joshkeller84
10 ай бұрын
you can shim - or you can twist/untwist individual sides of the buss cable
@mattsoutdoors7757
2 ай бұрын
Ok I am having issues with my sons bow. It has a 1" - 1 1/2" tare to the right and down. I had to change the cables and the cable gaurd. The oem gaurd was taring up the cables. This bow is a bear and has a top y cable only. I had never had any issue tuning this bow until now. Any ideas besides driving 5 hrs to your shop for you or your guys to look at it?😊
@bowbender5095
10 ай бұрын
Opposite for a left handed shooter?
@speedjunky1321
10 ай бұрын
@MFJJ can you do a video on your drawboard and why its best to include the 2" drop from the arrow rest to the pivot point. I know the LCA drawboard is decent and Archery Dezigns makes an offset one that is similar to the LCA but has the 2" drop. Just curious if you could spread the knowledge of the drawboard to the community. I'm mostly curious as to how that 2 inch drop really effects the timing of the cams. Are we talking a lot or not a lot? My mind says that there a difference in timing for sure, but I'm just not sure how noticeable it is. I know you are way smarter than I am so I'm hoping you can help the community out and drop some knowledge bombs. Thanks in advance from a total noob.
@thetintwizardsllc3128
3 ай бұрын
Will this work on a pro venom
@theincredible9168
10 ай бұрын
I love how easy it is to tune the carbon one. But damn that thing is heavy compared to the rx7 or levitate. My 2015 bowtech prodigy is lighter than the carbon one.
@papaschuette
10 ай бұрын
Do all bows have a way to adjust cam lean besides messing with the yokes?I have a Bear Legit that I can't get to tune properly. The cams are almost touching the yokes and the cam lean is still not straight.
@TylerDavis121
10 ай бұрын
I have a bear paradox that I fought for a long time. Finally found that the cam and idler were not shimmed the same. No amount of yoke adjustment made it better or worse.
@papaschuette
10 ай бұрын
@@TylerDavis121 Thank you. Is that something I can work on myself? I do all the other work on it. Or is that something a shop needs to look at?
@TylerDavis121
10 ай бұрын
@@papaschuette you can check it pretty easy. Just look at each cam and count the number of shims they should be pretty much equal on all four corners. In my case it was obvious. If you have to move them around, you will need to press it remove the axle and moved the shims around. It wasn’t too bad, just keep track of how it comes apart.
@user-hc4jn8sd2u
10 ай бұрын
You should do a podcast with John dudley
@Practice2Perfection
Ай бұрын
When you say "POINT right" or "POINT left" is that the same as nock right and nock left, which is what I normally hear. Or how can I tell the difference of its not the same ? I would really appreciate any insight. Its driving insane.
@billysilva6388
9 ай бұрын
How much can you twist and un twist yokes?
@jeffallen4013
26 күн бұрын
I just fletcher 6 arrows with only 2 blazer vanes 180 degrees apart. They are flying true at 60 & 80 yards. I get 10 fps better and save a few yards on sight tape. Should I stay with 2 vanes or 3 vanes.
@joeditz48
8 ай бұрын
Okay so now how does this apply to tuning with broad heads. Im a lefty, shooting a bowtech with the deadlock cams. My fixed blades impact 4" left of my field points at 50 yds, which way do i go on the cams 😅😅
@booomznooodle
2 ай бұрын
Please don’t think I’m stupid But as a lefthand archer do I have to move the cams still in the same directions for the same tear result? Or is everything in the opposite direction?
@drmitofit2673
10 ай бұрын
I drew myself a tuning guide with illustrations on how moving the cams left or right effect the cam lean and bowstring centering and which direction to correct paper tears (arrow flight angle), as well as some simple rules on how to correct the various tears. It also explains how different dual limb stiffness and the asymmetric angle of the cables/cable guide effect cam lean. My PSE Evolve 31 benefitted from limb swapping more than anything. Included is how to move the arrow rest to fine tune. Up-down arrow rest adjustment makes sense, but left-right arrow rest tuning seems paradoxical to common sense and probably causes a lot of frustration. Also, instead of close-up paper tear tuning (in slo-mo arrows fish tail out of the bow, even in compound archery), I prefer down-range bare shaft tuning to where my bare shafts embed in the foam target parallel to my fletched arrows and group with my fletched arrows. The problem with paper tear tuning is that in slow motion the arrow shaft bends like a wet noodle at close range, so I question the validity of close range bullet hole tuning. Down range, a bare shaft oscillates much less yet does not straighten correct its flight due to lack of fletching. Therefore I think it is a better tuning method. This video skips over a diagram illustration of the effects of cam lean and limb torque and completely ignores up-down arrow rest tuning which is critical.
@davidfleer5307
10 ай бұрын
JOSH I hope you answer my question how do that to a prime black 9 I’ve got it shooting bullet holes now and I’m not changing it and I don’t know why it is alignment dots do not line up and the draw length it’s set on shows my arms shrunk a whole freaking bunch I’m thinking I’m stupid and need new eyes
@aaronstempeck3667
10 ай бұрын
Is there a way to mix the Bowtech tuning system with other bows?
@douglasvaughn9530
10 ай бұрын
No
@johndhead1
10 ай бұрын
Curious. For string/cable/limb life why would you not set your cams with no lean and just do a simple rest adjustment for perfect tear? Looks like a lot of effort when a micro rest adjustment is easier?
@podiumarcher3447
10 ай бұрын
Most of the time when you set the wheel lean perfect on most bows it does shoot a clean hole with the rest where it’s supposed to be
@Jaxd9795
8 ай бұрын
If your rest is out of center then your groups will deviate one direction or the other at longer ranges.
@Bobbydoesarchery
10 ай бұрын
What happens if you’ve moved the cams almost all the way to the right but still have a tear. Would you then consider putting it all back and move the arrow rest first then the cams?
@davidfargen2167
10 ай бұрын
Make sure your rest is set at 13/16 and then check to make sure that your arrows are not to week of a spine or you have to much point weight for the spine of your arrow
@reddawng43x91
10 ай бұрын
Adjust the rest
@cardona54321
10 ай бұрын
You can move your rest, Also It could be influenced by your grip or face pressure etc too, make sure your form is good before tuning or it can cause people to chase their tails!
@Texaslivinoutdoors
10 ай бұрын
You need to shoot a video talking about stabilizers and how they affect your paper tear. I started adding a bunch of weight to my front bar on my target bow and started hitting right really bad, so I took my bars off shot it threw paper perfect hole then added the bars and got a nock left tear. So I played with weight and stabilizer angle till I got back to my bullet hole
@liamboyle9199
10 ай бұрын
Arrow flight doesn't really matter for target shooting though... Even more so the bullet hole is a "waste of time"
@Texaslivinoutdoors
10 ай бұрын
@@liamboyle9199 well I saw it at the target before I shot it threw paper. So the stabilizers definitely have an influence on your shot target or hunting bow
@liamboyle9199
10 ай бұрын
@Texaslivinoutdoors I'm not saying they don't change your arrow flight per say, although you appear to have a severe case which is quite odd😂 Normally if you stack front weight you will hit low. Hitting higher and right is quite strange. How many Pros run an insane amount of weight on the front and some will even purposely unbalance their bow so they force it to be level. Imagine the forces at work. I'd be willing to put money on it that not too many of them care what their stabs do to their arrow flight. Several times, you'll here a pro mention how their arrow flight wasn't the best, BUT they produced the best results. I know the logic dictates a bullet hole is the way to go but there's some stuff in this sport that doesn't quite work that way😅 But also as an individual obviously you have to do what works for you🙂 Arrow flight will matter with a hunting bow because of the broad head, so let's not bring that into this, I avoided it by specifically saying target shooting.
@Texaslivinoutdoors
10 ай бұрын
@@liamboyle9199 I only had like 5-6oz out front and it was torquing it to the right when the shot broke so I checked to see what was going on, I thought something moved. The point of my comment was you can get a bullet hole on paper then add bars and get a total different tear and most people when setting up there stabilizers just add weight till there level stays level not realizing it can cause you to torque your bow.
@Texaslivinoutdoors
10 ай бұрын
@@liamboyle9199 I don’t care what my bow is doing threw paper but when I see my stabilizers are having an effect down range I’m going to address it and I saw the issue in the paper tear.
@greekmaster1001
10 ай бұрын
Bowtech needs to do something with the threads on the set that keeps stripping aluminum and stainless steel don't mix
@drmitofit2673
10 ай бұрын
Cams are called "wheels" now?
@bartlawhorn2762
4 ай бұрын
Wouldn’t you eliminate the wheel lean and then move your rest left and right to papertune? this will make your bow more efficient
@tonyviers-de9qi
8 ай бұрын
Have you seen where arrow points where at -3/16 on the vtm??? Points way left. Taping atrow to riser have to put arrow at 1/2” for cs. Cam leans right pretty bad andd limbs are flexed uneven at cam. I got a bullet hole at about 12’ putting arrow at 11/16 and moving cam over. Not sure on grouping at distance though. Why is this bow giving me ocd
@dougbarabe7861
10 ай бұрын
this is a question ,, is it posible to take a "Imige Mathews bow limbs and put them on a v3x 33 riser ,,,? please get back to me ,,,,
@garrettmisenheimer2816
8 ай бұрын
I shoot a Hoyt RX3 ultra with a nock on archery limb driven rest. I fletch my own arrows with all aae stealth vanes, I’ve noticed a small whip at the end of the flight at longer distances…. I’m thinking paper tune??? Anybody else got any pointers!
Пікірлер: 180