Fantastic video. One thing they forgot to mention is that any towels you use for buffing off ceramic should be thrown away. It’s almost like having a thin layer of glass in your towel
@ChemicalGuys
3 жыл бұрын
Great point!
@neiljohnson5079
2 жыл бұрын
how about the applicatior...
@father_ooof1523
2 жыл бұрын
@@neiljohnson5079 same deal, throw it out
@KarelleDIY
Жыл бұрын
So you can’t wash the towel and use it again?
@bpebler
Жыл бұрын
Yeah, why not wash with hot water & soap to be able to reuse?
@torinmchone668
3 жыл бұрын
i’m getting into paint correction and coating cars, i’ve been using your guy’s product and i couldn’t be more satisfied with it
@ChemicalGuys
3 жыл бұрын
Enjoy your detailing products!
@Kid_Ellipsis
3 жыл бұрын
Just did this. First layer went on like butter. Waited 12 hours. Second coat was much tougher to wipe off and I’m not sure why based on my experience with ceramics, but the finish looks insanely good. I might recommend just one coat of carbon force.
@ChemicalGuys
3 жыл бұрын
Happy detailing!
@cadmando18
3 жыл бұрын
I just used this product on my 2021 Mustang EcoBoost HPP, and it turned out amazing. There are also some great videos on how to correct any mistakes like overlap or high spots. Just wanted to say though this I'm very happy with the Ceramic Coat, and I plan on buying more of it and applying it to more cars.
@ChemicalGuys
3 жыл бұрын
Thanks for sharing!
@vinceason2140
2 жыл бұрын
Nice and informative video as always. - Detail enthusiast from the Philippines.
@ChemicalGuys
2 жыл бұрын
Hi Vince! Thanks so much for being part of the Chemical Guys family!!
@harleminthebuildn9234
2 жыл бұрын
THAT PAINT JOB LOOKS AMAZING & RICH IN COLOR. AIN'T NOTHING LIKE THAT OBSIDIAN BLACK. TOP MARKS MATE 🎯🎯🎯👍🏽👍🏽👍🏽🔥🔥🔥👏🏼👏🏼👏🏼
@ChemicalGuys
2 жыл бұрын
Thanks for watching!
@pilgrim985
3 жыл бұрын
I just bought this CG ceramic coating a few days ago for my brand new Tacoma, can’t wait to apply it! Great video! Thanks!
@ChemicalGuys
3 жыл бұрын
Enjoy your detailing products!
@anthonylimite5656
3 жыл бұрын
Love these guys and their videos & products! My question is, I've seen other Chemical Guys videos on ceramic coatings where it says you should strip off all waxes and coatings before applying a ceramic coating because it bonds better to the paint instead of to an existing wax or glaze. In this video I see there're polishing just before applying the ceramic coating. Anyone have any other information on this? Thanks
@ChemicalGuys
3 жыл бұрын
Hey Anthony! Check out part 1 where the Aston was stripped using Clean Slate to prep it for the next step of the detailing process. kzitem.info/news/bejne/kn-EsZuVgnNhg6A
@R0L0Z3RO
2 жыл бұрын
Will be doing my bronco sport once all the products come in. Very excited to see the finished product!
@ChemicalGuys
2 жыл бұрын
Enjoy your detailing products!!
@Biglucs_Bronco_Life
3 жыл бұрын
Can’t wait for my Carbon Force to arrive in the mail, was supposed to get it today but FedEx didn’t come through. Really looking forward to applying this to my truck. Thanks for the great products and content.
@briandelgado4922
3 жыл бұрын
What kind of Truck do you have?
@Biglucs_Bronco_Life
3 жыл бұрын
@@briandelgado4922 F-150
@ChemicalGuys
3 жыл бұрын
Awesome, be sure to take pictures and tag us on the results!
@leecalvinmusic
3 жыл бұрын
Amazing video. Excellent presentation thank you for this, you guys give everyone the confidence to do this. Plus your products are amazing.
@ChemicalGuys
3 жыл бұрын
Glad you enjoyed it!
@GOdelta2
2 жыл бұрын
Awesome videos. When you guys fast-forward in your videos, could you show the speed on the screen? That’ll make it easier for us to make sure we know what speeds to mimic.
@ChemicalGuys
2 жыл бұрын
Great suggestion!
@davidclute6110
Жыл бұрын
Unless you’re a pro detailer, you won’t mimic their speed.
@GOdelta2
Жыл бұрын
@@davidclute6110 I meant speed as in velocity across the surface, not total amount of time to complete the job.
@TysonPaxton1214
2 жыл бұрын
Gonna apply this to a BMW X3 and my vehicle which is a 2015 Chevy Sonic. And its black. So its gonna turn out amazing. Just coming back to watch some videos for entertainment. Happy detailing to you guys!
@ChemicalGuys
2 жыл бұрын
Enjoy your detailing products!!
@FordF4NN
3 жыл бұрын
I'm ready for this to come back on stock!!
@ChemicalGuys
3 жыл бұрын
You're going to love it!!
@FordF4NN
3 жыл бұрын
I can't wait to finally get some, whenever I can! I take your word for it. I'm ready for my cars paint to be afraid of water all year long. Do you have a idea of when it might be back?
@iwayned
2 жыл бұрын
Just bought the Complete Clay Kit to clear off my dust rust spots. Lets see how it goes.
@ChemicalGuys
2 жыл бұрын
😃 Enjoy your detailing products!
@marcuslindberg1861
3 жыл бұрын
Hi from Sweden, nice vids! Gys
@ChemicalGuys
3 жыл бұрын
Thanks for tuning in!!
@JamieAM95
3 жыл бұрын
I am looking forward to doing this to my truck in the summer and was wondering if you have any videos on how to correct a mistake with the ceramic coating like missing a spot when removing and finding it after several hours or days etc....Thanks, I love all your products and videos.
@ChemicalGuys
3 жыл бұрын
Hey Jamie, if you're not satisfied with the results then you can polish it out and re apply as necessary.
@Elkhunterguy
3 жыл бұрын
Great job Joey!
@ChemicalGuys
3 жыл бұрын
Glad you enjoyed it!
@soto_elkevin
3 жыл бұрын
Omg Love these VIDS
@ChemicalGuys
3 жыл бұрын
Happy detailing!!
@Alex90jm
2 жыл бұрын
Very good video! I hadn't thought of applying it to headlights as well. Very good products!
@ChemicalGuys
2 жыл бұрын
Glad you liked it!!
@RobertBeedle
Жыл бұрын
You can polish the headlights too. I recommend polishing the headlight and glass and added a ceramic coat. Windshield especially
@meanf1502
3 жыл бұрын
Great job an I hate when people touch my truck after I just got done derailing it I can't stand That
@ChemicalGuys
3 жыл бұрын
Happy detailing!!
@davidharden5414
3 жыл бұрын
Can you show how to polish SUV/Trucks with ridges on the roof with a polisher? Smooth surfaces seem easy enough but not sure how to get in between those ridges.
@ChemicalGuys
3 жыл бұрын
Hey! Thanks for the amazing video idea, we will be sure to make a video for you!
@pandassudsnshine4125
3 жыл бұрын
@David Harden you can get a smaller backing plate for your polisher. If your really needing to get in between even tighter areas. You can use a drill with a polisher attachment that has a 3” backing combination pad.
@roberthidalgo2402
27 күн бұрын
Also my Rav4 has some chips...alot of swirls...scuff marks...a couple of places where the scratches are down to the primer finish. Will this video application be useful?
@xavierortiz2690
3 жыл бұрын
After u polished it,did u have spray it to get rid of any oils for better ceramic adhesiveness
@ChemicalGuys
3 жыл бұрын
Hi Xavier! It would be best to use a surface prep spray such as Wipe Out to remove oils and residue before applying ceramic.
@GamingrogerCJ
3 жыл бұрын
If your just applying a new coat of wax from about a year ago on my daily driver, is it a good idea to use Wipeout before an annual coat of wax and ceramic spray?
@ChemicalGuys
3 жыл бұрын
Hi Paul! After the natural degradation of the coating, using Wipe Out is great for ensuring the surface it totally clean before applying a new coat.
@CHENGSAQUA
Жыл бұрын
How many costs should you apply to reach the full five year expectancy?
@ChemicalGuys
Жыл бұрын
Hi there! Add two coats for the most protection.
@Adelcro
2 жыл бұрын
How do you know when to apply more to the pad? Or you apply each time you are doing the 2x2 portion?
@ChemicalGuys
2 жыл бұрын
Hey! Carbon Force will spread very thin to cover a large surface area. Reapply as necessary for even coverage.
@miroslavgoga7416
2 жыл бұрын
Hey chemcial guys love your products!! Can I use one applicator sponge for an entire car? Thanks.
@ChemicalGuys
2 жыл бұрын
Absolutely!!
@miroslavgoga7416
2 жыл бұрын
Cool thanks man!!
@pablolozada8566
3 жыл бұрын
I’m getting ready to apply carbon force in my SUV. It is a pearl white and white has very minimum scratches; I was planning on using VSS as a one step polish. Do you recommend that or just go with the two steps you used in this video? Also, is only one orange pad enough to do a full car or should I get a few?
@ChemicalGuys
3 жыл бұрын
Hey! We recommend using VSS Scratch And Swirl Remover. One pad will be more then enough for an entire vehicle. Thanks for watching and happy detailing!
@festeringfiestaspcmon
2 жыл бұрын
Freaking love these videos
@ChemicalGuys
2 жыл бұрын
Glad to have you as part of the Chemical Guys family!
@ThaCaviKid
3 жыл бұрын
What's the cure time on the carbon Force coating?
@ChemicalGuys
3 жыл бұрын
Hey! Allow coating to dry for 30 seconds to 1 minute.
@Eric_Draven713
2 жыл бұрын
after you have applied the coating, do you need to apply polish after every wash or does the coating keep it shiny till its time for a reply?
@ChemicalGuys
2 жыл бұрын
Hey! Carbon Force locks in shine and repels harsh elements for up to 5 years.
@andybenz6579
Жыл бұрын
You forgot to mention about the towels
@ChemicalGuys
Жыл бұрын
Hi Andy! The Workhorse Towels are great for buffing off spent product without harming the surface. www.chemicalguys.com/workhorse-professional-grade-microfiber-towel-3-pack/workhorse-microfiber-towel.html?gtmListValue=Internal%20Search
@GgG-71494
Жыл бұрын
Hi what maintenance products do i need to maintain d ceramic benefits to last for a long time??
@ChemicalGuys
Жыл бұрын
Hey! Maintain your ceramic by using HydroSuds and HydroSpeed. www.chemicalguys.com/hydrospeed-bundle/VIR196.html
@lilgremlin3328
3 жыл бұрын
Awesome video bro, where can I get the ceramic coating? I’m a detailer and you inspired me bro
@ChemicalGuys
3 жыл бұрын
Check out the link down below. www.chemicalguys.com/carbon-force-ceramic-protective-paint-coating-system/WAC232.html
@dmcbuilds1891
Жыл бұрын
Should you only do a small area at a time or should you do each panel in one shot also how should I wait in between ceramic coats
@ChemicalGuys
Жыл бұрын
Hi there! Work panel by panel for easiest application.
@paytonteague2651
Жыл бұрын
After a 2 step paint correction do you need to use the clean slate product before applying ceramic coating?
@ChemicalGuys
Жыл бұрын
Hi Payton! Rather than washing the vehicle again, use Wipe Out to remove any residue and prep the surface for ceramic.
@paytonteague2651
Жыл бұрын
@@ChemicalGuys awesome thanks I got some wipe out on the way!
@jeffreysmith6752
3 жыл бұрын
I have a Dodge Hellcat with a matte finish hood, matte finish top and matte finish deck lid. Can the B36, B38 and carbon force be applied on that type of finish?
@ChemicalGuys
3 жыл бұрын
Hey Jeffrey! Matte is very sensitive so only use Meticulous Matte Auto Wash and/or Meticulous Matte Spray Sealant to prevent staining.
@ALPHA-mh1tq
3 жыл бұрын
How much comes in the bottle? Enough to do a double coating on a full size suv?
@ChemicalGuys
3 жыл бұрын
Hi there! One bottle of Carbon Force can coat several average size vehicles.
@mikeyoung8557
2 жыл бұрын
I am looking to Ceramic coating my 4 door F-250 with a long bed. Can I get two coats with just one bottle? I am looking to do painted areas and all the glass.
@ChemicalGuys
2 жыл бұрын
Hey Mike! Yes, with proper application, one bottle will be able to coat a truck with multiple layers.
@komanderss13
3 жыл бұрын
Question: if you use wipe out spray is clay bar need it before polishing ?
@ChemicalGuys
3 жыл бұрын
Hey! Wipe Out will remove old layers of glaze, sealant, and wax but a clay bar should still be used to remove embedded contaminants. - CG Nick
@ramadanimam34
2 жыл бұрын
With those applicators. Do you buy new ones every time or are they washable or what?
@ChemicalGuys
2 жыл бұрын
Hey! Every side of the applicator pad can be used for one application before it needs to be replaced.
@ramadanimam34
2 жыл бұрын
@@ChemicalGuys i see. Thank you very much!
@faisalabdulaal1302
3 жыл бұрын
When can I do the second or third layers?
@ChemicalGuys
3 жыл бұрын
We recommend waiting for the previous layers to cure before layering it with a secondary coat.
@frankierizzo5481
3 жыл бұрын
@@ChemicalGuys How long is that?
@jesuslopez5494
Жыл бұрын
How often you would apply more ceramic to the applicator ?
@ChemicalGuys
Жыл бұрын
Hey! When the pad appears dry of the application is no longer consistent reapply more product.
@SGQ12
3 жыл бұрын
How can I purchase your product in all one package the way you use in car..
@ChemicalGuys
3 жыл бұрын
Hey there! Please check out the link down below to check out all of our available detailing kits available on our website. www.chemicalguys.com/kits/
@The00crouch
2 жыл бұрын
What the difference if you used vss instead of v36/38?
@ChemicalGuys
2 жыл бұрын
Hey! VSS is a great one step product for remove moderate imperfections whereas V36 and V38 is the perfect combination for multi-step paint corrections.
@toddhaynes7145
3 жыл бұрын
How long do you let it sit before multiple layers?
@ChemicalGuys
3 жыл бұрын
Hi Todd, allow at least 30 minutes to 3 hours in between coats.
@kevinzylich7676
2 жыл бұрын
After polishing can I glaze then do ceramic coat?
@ChemicalGuys
2 жыл бұрын
Hi Kevin! For best results, apply ceramic to a bare surface and then it can be layered with your favorite glaze, sealant, and/or wax.
@crazyfastyfz450
2 жыл бұрын
How often do you reapply the product to the applicator?
@R0L0Z3RO
2 жыл бұрын
When you notice the application becomes uneven in wetness. It’s not going to be soaked but will be visibly wet
@ChemicalGuys
2 жыл бұрын
Exactly! Reapply product to the applicator as necessary.
@redacted6855
2 жыл бұрын
What is a workhorse towel
@ChemicalGuys
2 жыл бұрын
Hey! Check out this link. www.chemicalguys.com/workhorse-professional-grade-microfiber-towel-3-pack/workhorse-microfiber-towel.html?gtmListValue=Internal%20Search
@426hemicuda1090
Жыл бұрын
do you use the wipe out spray before or after claying?? anyone??
@ChemicalGuys
Жыл бұрын
Hey! Use Wipe Out immediately before applying your first layer of coatings to ensure the surface is totally clean.
@426hemicuda1090
Жыл бұрын
@@ChemicalGuys thanks
@gabriellopez2082
3 жыл бұрын
Can i polish my car outdoors? I dont have a garage.
@ChemicalGuys
3 жыл бұрын
Yes, just be sure to be in a shaded area. Thanks for watching!
@winstonng15
3 жыл бұрын
Can i glaze before the ceramic coating?
@ChemicalGuys
3 жыл бұрын
Hey! We recommend applying the ceramic coating first, then apply the glaze. Thanks for watching and happy detailing!
@hunterskelly3837
2 жыл бұрын
Can you stop after clay bar?
@ChemicalGuys
2 жыл бұрын
Hey! After the clay bar process it is important to protect the surface with your favorite coatings to prevent future contamination from embedding the surface.
@darlabbyy
2 жыл бұрын
do you sell the pad conditioner?
@ChemicalGuys
2 жыл бұрын
Hi Darla! Absolutely, check out this link. www.chemicalguys.com/polishing-and-buffing-pad-conditioner/pad-conditioner.html?gtmListValue=Internal%20Search
@Asmrizzle
3 жыл бұрын
Washing process ?
@ChemicalGuys
3 жыл бұрын
Check out the prior video for the wash process. 😁👍
@chrisbalke9264
3 жыл бұрын
She bad!
@ChemicalGuys
3 жыл бұрын
Happy detailing!
@1stfrompuertorico568
3 жыл бұрын
1st
@ChemicalGuys
3 жыл бұрын
Glad to have you as part of the Chemical Guys family!
@nathanmartyn4211
Жыл бұрын
My car is black and it a 2021. I have the 8 piece polish and wak kit. Kit comes with the vss polisher. Is that too aggressive of a polisher??. What do you recommend if not this??.
@ChemicalGuys
Жыл бұрын
Hi Nathan! VSS is great for removing light to moderate imperfections in less time.
Пікірлер: 135