7 years and still valuable content fresh as today ❤ Thanks
@LittleWindowsResin
3 ай бұрын
Aww thanks! So glad you're a fan :) - Fran
@LisaVornhagen
2 жыл бұрын
I was glad to see the part where you used a paint brush to apply the resin. I've been wondering if it could be done and how to clean the brush afterwards. Thank you!
@violetobsessed
4 жыл бұрын
Cannot thank you enough for this tip! Using Flitz really changed my game & now I am no longer discouraged with my craft!! Thank you so much!!
@CelebrateCreations
5 жыл бұрын
I am a polymer clay & seed bead artist but your tutorial on resin are fascinating and I may have to start a new hobby great tutorial 👍
@SarahAbramova
Жыл бұрын
I deeply appreciate the scratches demonstration! Thank you!
@sharleneplescia6119
7 жыл бұрын
Fantastic video tutorials. You stick with the subject and get the job done as well as include all necessary and alternative steps. So many tutorials out there for a variety of subject focus too much on the 'glitzy look at me more than the process' ....so annoying when you are trying to learn something. Thank you for your professionalism! I will be ordering your high quality products so my first attempts can be amazing! Thank you again! Sharlene from SYS
@kimhuff
7 жыл бұрын
As always, another great Little Windows video. I can't tell you how excited I get every time my KZitem tells me I have another video by you. Thank you so much!!!
@LittleWindowsResin
7 жыл бұрын
Oh how I love you Miss Huff! Thanks for being you :) - Fran
@jijabaidharade461
Жыл бұрын
It is very good for the guidelines. Thanks a lot 🙏. GOD bless.
@amandaortiz8985
3 жыл бұрын
I am SO HAPPY you made this video!!!! THANK YOU SO MUCH for making my life less stressful. 🥰🤗🙏🏻
@MirinJawBrah
6 жыл бұрын
Amazing product. Just ordered the polish which gives the resin an incredible shine, much better than the novus 2 scratch remover.
@lilithcal
6 жыл бұрын
Jewelers’ rouge also does a good job of polishing.
@rt2wshp
Жыл бұрын
Thank You!!!! I don’t have to throw my project out! Although I was trying to cut corners… trying it with paper towel & got a small result, I tried it with a disposable handywipe, again small result, I tried it again with a plain cotton cloth still small results 🤔 I finally remembered you were using a microfiber cloth, that made ALL the difference 🤩
@emilyhess3065
Жыл бұрын
Thank you! I just ordered this product for my teenage daughter who is loving making all things resin! ❤
@LittleWindowsResin
Жыл бұрын
Wonderful! Please let her know about our resin project library, and that I'm here to help if she gets stuck along the way. www.little-windows.com/pages/new-project-ideas-and-how-tos fran@little-windows.com
@connirhoden7895
Жыл бұрын
You are a wonderful teacher thank you I am learning a lot
@LittleWindowsResin
Жыл бұрын
Hello @connirhoden7895, I'm so glad you're loving my videos! You'll find lots more resin tips in my IDEAS+HOW-TO's library, have a look: www.little-windows.com/pages/how-tos Let me know if I can be of help in any way :) fran@little-windows.com
@sassybury7422
4 жыл бұрын
Thank you SO MUCH FOR THIS VIDEO. I just bought this product. Saved me hours of having to sand
@LittleWindowsResin
4 жыл бұрын
Glad I could help!
@craftersepoxy8884
3 жыл бұрын
love this , perfect for a gift
@marysnipes4972
Жыл бұрын
Thank you. Enjoyed your tutorial.
@nancyjones7257
Жыл бұрын
Thank you. This is EXACTLY what I was looking for!
@josoz973
3 жыл бұрын
Thank you so much ❣️ just bought some. I have a very very precious resin ring with my dad's ashes in that has minor scratches, I didn't want to send it to the jeweller so have been looking for something safe xx
@bobriart
5 жыл бұрын
I love your videos, and also supplies from your store. I respect your high quality work. Thank you so much for inspiration and helping
@LittleWindowsResin
5 жыл бұрын
Thanks for your feedback, I'm so glad you're loving little-windows.com!
@krrinam4266
5 жыл бұрын
Thank hou very much! I ordered some Flitz! Hopefully the clouds will flitz away from the resin.
@Nana-cd6iz
2 жыл бұрын
This is a godsend
@sehunlimitedsonyahoward1165
5 ай бұрын
Thank for doing this
@user-wp9vf8kx1h
4 жыл бұрын
Thank u sooo much for ur Great Tutorials !!!! Love the way u explain with demo👍🏾.
@catrinelsabaciag9495
6 жыл бұрын
Thanks so much the coating with resin idea saved the day!
@lakeshas1421
3 жыл бұрын
Thank you so much for this video!!!! 💛💛💛
@ricissimaswelt4677
7 жыл бұрын
Your videos are always so helpful. Thanks for sharing.
@kathybray7156
10 ай бұрын
Polish resin ❤
@AlexanderChilds
7 жыл бұрын
Good suggestions. You can also just bypass all that and get water and micromesh.
@ArijanaLukic
6 жыл бұрын
Can micromesh work on pieces of resin that have details? I make little robots that are made with matte molds so now I want to bring the shine back..Thanks!
@lnc-to4ku
3 жыл бұрын
Thank you SO much for sharing this information!! 💗
@sirdrakey
4 жыл бұрын
I love Flitz it's a great polish!
@ThisOLmaan
3 жыл бұрын
was going to buy flitz polish at Amazon till you mentioned it on ur video, also if i'd known I would of bought the Bubble leveler, I also bought one at Amazon, but ur shop ships mighty fast, ty.
@Barbs_Collectibles
3 жыл бұрын
Great info
@tammyrenkowic2017
3 жыл бұрын
Clear nail polish works great too, easy, brush on and let dry
@LittleWindowsResin
3 жыл бұрын
Hi Tammy! Just following up, I've always found that clear nailpolish turns yellow pretty quick, have you found a brand that holds up over time? Thanks for your feedback :)
@tammyrenkowic2017
3 жыл бұрын
@@LittleWindowsResin I've found that opi holds up pretty well over time
@LittleWindowsResin
3 жыл бұрын
@@tammyrenkowic2017 Thanks Tammy!
@kidstaxi6156
4 жыл бұрын
Thank you very much!!!!!! 😍😍😘😘👍👍
@Elagydaorb
7 жыл бұрын
Love your video very informative for those with MCS/Allergies tfs blessings.
@viridislucent6535
4 жыл бұрын
I just want to say I bought that polish, and it totally had the opposite effect of shining my resin pieces- it left a dull cloudy finish that essentially seems to have ruined my jewelry. It looks awful; I don't know why- it's the exac same one recommended here. it didn't work for me, so I thought I should warn others of that.
@LittleWindowsResin
4 жыл бұрын
I'm sorry you had that experience, if you are interested in emailing a photo or two to fran@little-windows.com, I'll be happy to help you troubleshoot.
@halloween2010blue16
2 жыл бұрын
It was the same with me, I've tried it 10 different times with different techniques and it always gives me a cloudy look with a weird residue feeling on the pieces
@rt2wshp
Жыл бұрын
You MUST use the Microfiber Cloth! I was trying it with paper towel & got a small result, I tried it with a disposable handywipe, again small result, I tried it again with a plain cotton cloth still small results 🤔 I finally remembered she was using a microfiber cloth, that made ALL the difference 🤩
@KiKiJahDore
5 жыл бұрын
This was really helpful. I just bought some resin molds so i'm waiting for them to be shipped and I am not sure if they will produce shiny pieces like my silicone molds do. I just normally use the method that you showed in the second part of the video with mixing more resin. The polish would definitely save me using more product. Oh and GREAT tip about the nail polish remover, I'm always trying to think of ways to save money.
@sweetspike16
7 жыл бұрын
love this ! this could really help shorten the time in making our pieces!
@LittleWindowsResin
7 жыл бұрын
Thanks! I'd love to hear how these techniques help you in future, any feedback is welcome :)
@livvylou755
6 жыл бұрын
What kind of resin are you using? Keen to know if this free pouring method would work with Polyester. Thanks!
@sarahdermody6665
3 жыл бұрын
This has been so helpful, thank you!
@LittleWindowsResin
3 жыл бұрын
You're so welcome!
@jennytausendfreund4607
6 жыл бұрын
Very well explained! I‘m still learning working with resin and this helped me a lot! Thank you!
@saidalimam7201
3 жыл бұрын
Hi Jenny, Have you tried it? Looking forward to your feedback!
@adrianaariza-jones3694
7 жыл бұрын
I LOVE YOUR VIDEOS!. They are very informative and you are very good at it
@LittleWindowsResin
7 жыл бұрын
Thanks so much Pily!!! I love to share new discoveries and hope to take some of the pain of trial-and-error away from your process, so you can simply create! Very best wishes :) - Fran
@nitagill3227
7 жыл бұрын
Very well done and informative video. I'll be trying out both methods. Thanks!
@LittleWindowsResin
7 жыл бұрын
Thank you Nita! Please let me know what works best for you :)
@1tinac
5 жыл бұрын
Thank you! thank you! This is very helpful.
@desleykakoulidisgallaway3382
5 жыл бұрын
Excellent 👍😍
@yejigtm
7 жыл бұрын
This is what I needed!!!!
@vickislominski7618
2 жыл бұрын
Outstanding tutorIal! I loaded up my cart then realized ... I use UV resin. I've seen the comments and I will give the polish a go. Now the question is...will your clear moulds work with UV resin? TIA
@LittleWindowsResin
2 жыл бұрын
Hi Vicki! Yes our clear molds work great with UV resin, but you'll have test out the polish as its performance will be based on the material you're polishing. Thanks for asking :)
@ecuadra49
5 жыл бұрын
👍👍👍👍Nice, thank you
@michelemarie111
7 жыл бұрын
Great video, thank you for the tips! Heading to your website to order some supplies now!
@LittleWindowsResin
7 жыл бұрын
Thanks Michele! Have lots of fun and let me know if I can help in any way :) - Fran
@michelemarie111
7 жыл бұрын
Thank you Fran!
@trinasmith1536
4 жыл бұрын
Wow thank you! This was very very helpful!😊
@LittleWindowsResin
3 жыл бұрын
You're so welcome!
@imawaffle148
3 жыл бұрын
this is a really great video, but i have no idea why this is in a civilization 5 soundtrack playlist.
@michellejimenez1449
3 жыл бұрын
Mine became very matte after using this product
@LittleWindowsResin
3 жыл бұрын
Hello Michelle! I'm sorry to hear you had this result, remember it takes quite a bit of pressure while you rub to get a good shine. Beyond that your resin pieces must be completely cured - pieces that are too soft have a hard time being polished, and the type of resin you use can require a different approach. If you'd like me to help you troubleshoot just email a photo or two to fran@little-windows.com and I'll be happy to advise :)
@bresorte
6 жыл бұрын
excellent video and explanation!!!!! thank you so much for sharing!!!
@metals2546
7 жыл бұрын
Excellent tutorial. Very helpful. Thank you for sharing.
@LittleWindowsResin
7 жыл бұрын
You're very welcome, and thank you for your feedback :) - Fran
@pavlospavlidis1907
7 жыл бұрын
Nice work there. 😍loved the crafts we can see in the beginning of the video !!!!! That's a great product for polishing . But for us who live in Europe and we cannot find this product? Maybe you have a tip for for polishing some foggy items? 🙏🏼thanks
@grrrrrutah
4 жыл бұрын
Just curious if you can use these methods on large flat crystals in costume jewelry, to "erase" scratches and dings from the gem surface and restore brilliance, etc., or do you have better tips for that sort of item?
@LittleWindowsResin
4 жыл бұрын
Hello! I'm not sure, it'll depend on how hard the surface is, if it's glass or some sort of plastic. It's worth experimenting I think :)
@FlopCouture
5 жыл бұрын
Wow cool!!
@atenasleandry2907
7 жыл бұрын
Hi! I was wondering if the polish works with any type of resin.
@debbiemitchell6055
6 жыл бұрын
Great video
@SheLikesSteel
7 жыл бұрын
Watching this and thinking it might help to place the cloth in and embroidery hoop
@LittleWindowsResin
6 жыл бұрын
Oooh, what an interesting thought! Sorry for the delayed reply, I appreciate your idea and plan to give it a try :)
@see4entertainment130
2 жыл бұрын
Okay, the recast resin, is alot better in my opionion, I will buy it from you soon from uk. - question, I am sanding alot, but still see alooot of scratches, what do I do to fix that ? - I use a drill with sanding pads, and after do it all by hand, but still scratches.
@LittleWindowsResin
2 жыл бұрын
Hello! Sorry for the delay, if you're still having issues I'm happy to help, just email a photo or 2 to fran@little-windows.com so I can see what you're dealing with :)
@TheRaoulsdaddy
5 жыл бұрын
Toothpaste and a bette rgrade of microfibre will do the job just fine.Scotch brite high performance cloths are great.
@meghanworkman6449
5 жыл бұрын
Is there a particular kind of toothpaste that works better than others?
@redredmane5544
5 жыл бұрын
You probably ended up with enough polish on your cloth that you probably didn’t need to use any MORE polish.
@dachatollinchi4510
Жыл бұрын
Can you sand the piece with imperfections and then put the polish cream?
@LittleWindowsResin
Жыл бұрын
Yes you can, but you'll need to sand progressively up to about a 1000 grit+ for the polish to work. I hope that's of help :) - fran@little-windows.com
@aniscollection4092
6 жыл бұрын
Thanks
@devonburton9119
3 жыл бұрын
Do you tell clients you are making stuff for that they may need to polish down the line? Especially for jewelry
@LittleWindowsResin
3 жыл бұрын
Hi Devon! I don't because it usually only happens when the pieces get abraded, scratched up from being in a pocket or packed with sharp things, or if harsh chemicals get on the surfaces. I provide a "Caring for your Resin Jewelry" note with everything, which is similar to the way you'd want to treat pearls - last on, first off, be gentle, etc. I hope that's of help :)
@hotdogagua
7 жыл бұрын
I didn't see the polish on your site. i am not sure i looked in the right place. thank you!
@LittleWindowsResin
7 жыл бұрын
So sorry! We had a better response than expected and were out of stock for a little bit, but we've got it now, here's a link, and a discount code you can use for 10% OFF in thanks for your patience: www.little-windows.com/collections/adhesives/products/resin-polish-kit-the-safe-polish LW1017
@JumpinJacksCrafts
2 жыл бұрын
Question for anyone that has used this method: I am looking to sell my jewellery, will the shine last, or will buyers have to polish regularly to keep it shiny?
@LittleWindowsResin
2 жыл бұрын
Hello JumpinJacks! In this tutorial I'm working with pieces that were either cast in non-shiny molds, or which have gotten scratched up over time. Once polished/recoated, the shine should last unless your customer damages the piece in some way. The shine does not rub off, but anything made with resin is vulnerable to scratching, and can also develop a dull surface if harsh chemicals such as perfume, self-tanners, etc, get on the piece and are not cleaned off right away. They can be cleaned with warm water and dish soap, with fingers or a soft piece of wet material if needed. I hope that helps :) fran@little-windows.com
@JumpinJacksCrafts
2 жыл бұрын
@@LittleWindowsResin thank you!
@seraphimstep8443
3 жыл бұрын
I used The flitz polisher but why does it scratch my resin surface like a sand paper ?
@LittleWindowsResin
3 жыл бұрын
Hi! Wow, I have no idea, but if you could send a photo or two so I can see what's happening I'll be happy to help. Did you use the Flitz Polishing Cloth with the paste? fran@little-windows.com
@Emzepicchannel
6 жыл бұрын
this is so helpful! can you do a video of setting hair (like pet hair) into resin? thank you
@glowstonestarzaj4922
5 жыл бұрын
Why would you put pet hair into your resin? XD That’s what everyone tries to avoid
@mostlycountrycovertunesbyn3123
3 жыл бұрын
@@glowstonestarzaj4922 pet memorial
@marikiemarie7622
4 жыл бұрын
I use a small hand drill with a polish pad and nothing else
@michellezahn5643
7 жыл бұрын
Hi LittleWindowsResin! I was wondering if the Flitz polish had been tried on polymer clay pieces to polish them in conjunction with sanding. I am looking for a safe polish to get my polymer clay pieces shiny. Thanks so much for your excellent videos! I learn so much about resin from you and your products are great! ❤
@LittleWindowsResin
7 жыл бұрын
Hello Michelle! I just did a test to see how it would work, and while it does give the polymer clay a bit more luster, it also rubs some of the color/clay off on the polishing cloth, so I'm not sure this is the best option. If you email me at fran@little-windows.com, I'll be happy to send you photos of my results so you can see how it worked. Maybe more extensive testing by a better polymer artist is called for. Have you tried coating your polymer pieces with a thin layer of resin?
@michellezahn5643
7 жыл бұрын
LittleWindowsResin thank you so much! ❤️ I will be emailing you for those pictures.
@chrisciplickas2603
Ай бұрын
would this work on Rings with gold?
@LittleWindowsResin
Ай бұрын
Hmm, I would think so, but you'll need to experiment :) fran@little-windows.com
@Friday13420
7 жыл бұрын
so could I polish my resin charms instead of doming the top?
@wandashepherd
3 жыл бұрын
What kind of molds are those? I've only used silicone.
@LittleWindowsResin
3 жыл бұрын
Hi Wanda! We offer both specially-coated plastic and silicone molds at little-windows.com The molds used in some of the projects - like the fish - were silicone but were not shiny polished silicone so the castings came out frosty. Hope that helps :) - fran@little-windows.com
@ValerieEarl
Жыл бұрын
Can you use the Flitz on UV resin? I had to sand a little bit where the resin spilled and now that area isn't as glossy/shiny as the rest.
@LittleWindowsResin
Жыл бұрын
Hello Valerie, sorry for the late reply. You can test it out but I've found it works best on epoxy resin. It'll depend on the hardness of the cured UV, which varies by brand. I hope you find a solution to save your piece :) -Fran
@moeterusa9096
2 жыл бұрын
Do all resin come out like this? I dont have flat surface molds i have dog face resin mold and they come out foggy
@LittleWindowsResin
2 жыл бұрын
Hello! It's usually the mold that determines surface finish, I would think the second option in this tutorial might be the best option for something with a bit of detail like a dog face. Glad to help :)
@mrspankytank2858
2 жыл бұрын
Help?! I’m looking for coin molds. Assorted sizes. Been looking different places like Amazon and other sites. Dime to half dollar sizes and in between. Found silicone 1.25” on Amazon but their cloudy. Would that affect their finish?? I’m actually putting four leaf clovers in them.
@LittleWindowsResin
2 жыл бұрын
Hello MrSpankyTank! You're right, a non-shiny mold will give you non-shiny castings. Have you considered open back bezels instead of molds? If you can send me a photo of the final look you're going for, I'll be happy to help you source what you need if we don't offer it here at little-windows.com Thanks for asking, fran@little-windows.com
@kimfersner1916
2 жыл бұрын
Is this good if the resin or epoxy is sticky? Will it remove the stickiness?
@LittleWindowsResin
2 жыл бұрын
Hello Kim, sorry for the delay but no, stickiness is something else all together and trying to polish it will only make things worse. If you would like to send me a photo of your piece and a bit more info about what's going wrong I'll be happy to advise. fran@little-windows.com
@rafaelturner7921
6 жыл бұрын
can you tell me what type of resin you are using? fiberglass or epoxy resin? Thank you.
@GJJ229
7 жыл бұрын
thank you Fran helpful video :) by the way, could you kindly please share the link to buy the disposable brush you used in the video?
@LittleWindowsResin
7 жыл бұрын
Hi Grace, thanks so much for your feedback! In about 2 weeks we'll be selling those small flat pointed brushes at www.little-windows.com, keep an eye on our e-newsletter, that's where I'll announce their availability :)
@tristynroughton5619
4 жыл бұрын
What am I doing wrong with the polish? I have the cloth and the polish you are using here and I’m using the same technique you are. I see no difference in my pieces. 💔 Does it needs to be washed or done multiple times??
@LittleWindowsResin
4 жыл бұрын
Hello Tristyn! Sorry you're not having luck so far, I'll be happy to help. Can you send a photo of one of your pieces so I can best advise: fran@little-windows.com
@Abundantlyreceiving
4 жыл бұрын
Can you use a us lamp with little windows resin?
@violetaotono9042
7 жыл бұрын
MUY MUY BONITO TODO ''
@ridbits
5 жыл бұрын
Will this polish also work as a sealer in case I do it on gilded edges of a project where I have used leaf paint?
@ernestoguerra8942
6 жыл бұрын
What kind of sanding block are u using?
@phoebewinter3239
6 жыл бұрын
Great video. Looks simple enough to try this at home. :) I have a question, noting that there are references in the comments about there being different types of resin. Would you recommend the polishing technique using Flitz for a resin Chanel bangle bracelet? Thank you.
@LittleWindowsResin
6 жыл бұрын
Hello Phoebe, sorry for the delay. IS your bangle black gloss or white gloss or another color? I believe you'd have luck with them all, but the black glossy finish is more likely to still show marks. Have you tried this already? feel free to email me fran@little-windows.com
@jackiebryant4070
Жыл бұрын
Can you tell me ware I can get your mold they're not on Amazon
@LittleWindowsResin
Жыл бұрын
Hello Jackie! The molds I use are here: www.little-windows.com/collections/brilliant-molds-2 Thanks for asking :) fran@little-windows.com
@xoxomeshellxoxo327
2 жыл бұрын
Where did you find your drip trays
@LittleWindowsResin
Жыл бұрын
Hello Michele! Do you mean the Silicone Doming Trays with the little fingers? If so, here's a link, if not, please clarify and I'll be happy to help :) www.little-windows.com/collections/doming-trays/products/large-silicone-doming-tray fran@little-windows.com
@SarahAbramova
Жыл бұрын
I saw a video that used a glass coating spray to make a clear scratch resistant knife. Can this method be used for resin?
@LittleWindowsResin
Жыл бұрын
Hello Sarah! You'll have to test this out to make sure the coating doesn't interact with your resin pieces, and that it doesn't yellow over time like many coatings can. What was the brand you saw?
@SarahAbramova
Жыл бұрын
@@LittleWindowsResin the video didn't show a brand name, just the part that said it was a 10h glass coating spray for car paint, but seemed to work on glass and cans too.
@bonafidecustoms4479
3 жыл бұрын
Nice video, how do you mirror polish a Mould?
@LittleWindowsResin
3 жыл бұрын
Hello, sorry for any confusion, you can't polish a silicone mold, once the material degrades you'll need to get a new one. Harsh resins and other chemicals can shorten the life of your molds. I hope that's of help.
@karma_believer_bro
4 ай бұрын
Do u deliver ?
@catdrugs6656
3 жыл бұрын
Can this also be used on uv resin
@LittleWindowsResin
3 жыл бұрын
Hi Cat! You'll have to experiment a bit to see as each type of resin has a different hardness level once cured. Even within UV resins there are many differences. If you'd like to give it a try please email me and I can arrange to send a sample for you to test out. fran@little-windows.com
@53tsaot
2 жыл бұрын
Any tips on keeping resin from browning with age? I cast a couple of bugs with plants but over time they’ve turned 😢
@LittleWindowsResin
2 жыл бұрын
Hello Lauren! Yes, all epoxy resins will begin to discolor over time. Our Brilliant Resin is quite resistant to discoloration, so I think you'll be happier with your results. If you have any specific questions or concerns, email me with a photo of your piece and I'll be happy to help :) - Fran
@christiefowler2401
2 жыл бұрын
Will this be ok on a resined paint pour?
@LittleWindowsResin
2 жыл бұрын
Hi Christie! If you mean Brilliant Resin, yes it works really well on acrylic pours, whether you Dome it or Cast it. If you mean can it polish resin with acrylic mixed in, or where the acrylic is partially exposed, I don't think so. If you'd like to send a photo of your piece I'll be happy to give a more focused reply :) fran@little-windows.com
@b.babsl.2499
5 жыл бұрын
Looks great, I will for sure try it.... but doesn’t the tape leave residue ?
@LittleWindowsResin
5 жыл бұрын
Depends on the tape you use, but if it does you can use acetone to remove it :)
@farahaballaoui7620
6 жыл бұрын
Hello. Can u help me please, for the first time my epoxy has wrinkled, do u know why? Is it too late or is there a solution. Thank u for ur help
@LittleWindowsResin
6 жыл бұрын
Hello Farah, can you email a photo or 2 to fran@little-windows.com? I'll be happy to help troubleshoot.
@sassyblondeinwa
5 жыл бұрын
Can somebody tell me the name of the little findings that you hang your pendant with....? I have big caps but they don’t always work and I can’t figure out what you call those little pendant saying is that you put on the top of your round pendant or your tube pendant that has the little bail Can somebody tell me what those are called please🥴
@LittleWindowsResin
5 жыл бұрын
Do you mean flat-backed bails?
@self5738
4 жыл бұрын
Can the polish be used for uv resin?
@LittleWindowsResin
4 жыл бұрын
Hi Sully! It really depends on the formula and how hard your fully cured pieces are, but it might be worth a try. Keep in mind that polishing will never give you quite as high of a shine as a new coat of resin, but it does a pretty good job! Thanks for asking :)
@dkzander
3 жыл бұрын
Hi-can your resin be cured with a light? Or is that a completely different system?
@LittleWindowsResin
3 жыл бұрын
Hello Dona! No, epoxy resins are not light-curable, but they will set up faster with heat. Try to work in a space that's at least 72F if possible :)
Пікірлер: 322