Something i'd like to add that I have found to be probably the most valuable tip when trying paint combos to see if they play nice. test it out on a plastic spoon. I picked up a box I think of 50 of them and it was only ~$3. Or if you eat a lot of fast food usually you can just toss 1 or 2 in the bag with your order. That way you're not messing up a $20 or more model kit that you probably already have time invested in with other parts.
@JoeKrol
7 жыл бұрын
You can get them in the us at the dollar store for, well a dollar.
@miatageekscott
9 жыл бұрын
Another thing you might try is powdered carbon on top of primer for sanding mold lines, I work in a body shop and we use a dry guide coat, it goes on top of the primer when it's dry and when you sand you can see where all the imperfections are and where you have sanded....
@miatageekscott
9 жыл бұрын
I use Duplicolor scratch filling primer/sealer, works great and is compatible with almost all color coats, from Duplicolor, to Krylon Fusion...Then I use Tamiya clear for the clear LOL
@Mao_tse_tung
Жыл бұрын
I appreciate your choice of music
@ChrisFredriksson
7 жыл бұрын
Beautiful video with lots of useful tips! =D
@bobyoung1698
3 жыл бұрын
Thanks for Strauss!
@brainjuice4381
4 жыл бұрын
Thanks!! Your works are my modeling bible.
@sbvwfanatic
9 жыл бұрын
Nice. I'm going to be starting this very kit soon.
@pturley84
9 жыл бұрын
Great Tips! Never thought about using a permanent marker to highlight all the mold lines.
@MuscleCarModeler
8 жыл бұрын
Great tips, we can all learn from each other and I have learned lots from your vids. Thanks for sharing. Be Blessed Sis! Danny
@LordRusty5
3 жыл бұрын
Colors and primers from "Gravity Colors USA" - made for model cars - are terrific!
@SickMoover
6 жыл бұрын
I love this Caaar! Its weird, but this is my dreamcar. not a lamborghini or something high end car.
@GUNPLABUILD_2024
2 жыл бұрын
Amazing!👍👍👍🤩
@Toppervision1
9 жыл бұрын
Great ideas here. Never thought to use the scrubbing pad.
@Workerbee-zy5nx
10 ай бұрын
The po' boy way of finishing a kit is a can of krylon. Light sandpaper grit, rinse car off, dry, tack cloth all lint. Find a hot day, mist paint, wait, mist, until its glossy..
@MrModelworx
9 жыл бұрын
great video and very informative, I'm having major problems at the moment with paint flaking off at the sharp edges of the model car body, the paint chips off down to the bare plastic takes the primer and everything with it. will using the scotch pad all over cure this ? does it give the primer something to bite into. I'm using duplicolour primer and top coat they are acrylic based sprays. thanks
@TheScalemodelingChannel
9 жыл бұрын
+gaztheK Scotch or sanding paper will scuff up the surface and therefore indeed giving the primer something to grab on to. if the surface is unprepared its to slippery and the paint could fall straight off like what you explained.
@miguelmigkustomz9010
9 жыл бұрын
Awesome work man! Thanks for all the amazing tips!
@mikebreazeale2563
9 жыл бұрын
Great music!
@TasosX
Жыл бұрын
Hello friend. Amazing work. You know what kind of plastic is the body shell?
@TheScalemodelingChannel
Жыл бұрын
Styreen
@bluegrasscrazy7307
5 жыл бұрын
How do you clean your models before priming..Thx...
@DjOrs96
6 жыл бұрын
Hey! Love your work man inspired me to start again. Do you like Alclad primer and clear? I live in australia and dont have too many options. And also can I decant tamiya spray primer to use in my airbrush? Thanks :)
@TheScalemodelingChannel
6 жыл бұрын
You can do that, yes. However i would just use the can for primer if you already have it
@salmondafish3963
3 жыл бұрын
What should the texture of the plastic be after sanding? Should it be a little rough or smooth?
@jorgeguerrerotoledo
6 жыл бұрын
After sanding, scribing and roughing up the surface of the body, how do you clean up any residue (plastic dust and other particles) before priming?
@TheScalemodelingChannel
6 жыл бұрын
Whash it, or dust it off with high pressure air
@jorgeguerrerotoledo
6 жыл бұрын
@@TheScalemodelingChannel thanks
@jasonmorrell2770
3 жыл бұрын
Is there a conversion chart for fine grade P???? Sandpaper to the American grades?
@alpeena
4 жыл бұрын
wait..did u skip totally how you cleaned her up after sanding/before priming....?????????
@sclarebout
8 жыл бұрын
This is dope! Thx for sharing!
@verve78arief
4 жыл бұрын
Hi nice tutor... n why plastic primer get melt or wringkle my plastic model kit? Whats wrong.. thanks
@ooyginyardel4835
2 жыл бұрын
Love Strauss
@kylemay6043
7 жыл бұрын
Do you have any recommendations for knowing when in the building process to paint different parts? Obviously every model is different, but it seems easy to paint too early, or too late.
@TheScalemodelingChannel
7 жыл бұрын
+Kyle May i personaly assemble everything i can before painting. And then just paint all the parts and finish the assembly
@luukwu7193
7 жыл бұрын
Ik kom er nu pas achter dat Nederlands bent maar je maakt super goede video's
@timbouman3641
7 жыл бұрын
Luuk Wu je hoort het aan dat gebroken engels 😂
@TheScalemodelingChannel
7 жыл бұрын
Tim Bouman zou dat het zijn?
@timbouman3641
7 жыл бұрын
The Scalemodeling Channel hhhhm geen idee denk het
@TheScalemodelingChannel
7 жыл бұрын
ik zou het knap vinden aangezien je nou niet echt een accent hoort, maargoed. dat zal wel aan mij liggen
@Stickybutton
6 жыл бұрын
Would like to order stuff from your web shop but you still don't ship to Singapore. :(
@StevenReyBargamento
2 жыл бұрын
Quick question. Do I need to primer every piece of a car model kit or just the body?
@TheScalemodelingChannel
2 жыл бұрын
In general it is best practise to prime all of the parts you are going to paint
@fordman1956
9 жыл бұрын
Great information , Brother. Very helpful........JIM
@jslute
4 жыл бұрын
Has anything changed in the way you prep since you made this tutorial?
@wizels
9 жыл бұрын
At the final score you forget about Screenwriter, Producer and Director! ))))
@ParkAvenue287
9 жыл бұрын
Awesome video! Thank you. But I think you forgot to put the link of the sanding sticks in the description?
@TheScalemodelingChannel
9 жыл бұрын
ParkAvenue287 That indeed is correct :P My bad.. modelbrouwers.nl/winkel/schuren-en-polijsten/vijlen/vijlenset-fijn-grit-240-320-3mm-12-stuks
@keithsmodelsandrcs6593
Жыл бұрын
iv found i leave alot scratches from sanding body b4 paint with 600grit tamiya sponge any advice on how to avoid it or should I use 800 to 1000 instead?, thanks in advance ,👍
@TheScalemodelingChannel
Жыл бұрын
If 600 leaves to much scratches for you, try 800
@dietko
3 жыл бұрын
Hi can u please directly send me the link the scotch brite pads please since I can't find the link in the description. Great job btw!
@jamesprice647
6 жыл бұрын
Thank You, I Gut got through scuffing a airplane model and I like your indentation scraping deal. Anyhow, what you you use to do your final clean before laying down Paint.? Respectfully, Jim P. Jenuine-Motor
@TheScalemodelingChannel
6 жыл бұрын
James Price a tack cloth. Or just high pressure air
@Serika17
6 жыл бұрын
Hi! What is that thing you use to mount the kits while painting? I've seen it on several of your videos but have yet to come across a description on it. I'm a big fan of your builds btw! Cheers!
@TheScalemodelingChannel
6 жыл бұрын
Tamiya spray stand
@Serika17
6 жыл бұрын
The Scalemodeling Channel thanks for the reply!
@williamsantiago7303
7 жыл бұрын
By using the black marker does that let you find ruff spots on the edges? Is that the reason for the marker? Great video and VERY INFORMATIVE buddy. Keep up the good work. Thumbs up bud.
@TheScalemodelingChannel
7 жыл бұрын
+William Santiago yes
@ed-varner8472
3 жыл бұрын
Is this a revell? I’m doing the same one now but want better wheels for it n can’t find any to fit any tips for me?
@Ymaximm
5 жыл бұрын
Hi, on what pressure you applying primer, painting?
@TheScalemodelingChannel
5 жыл бұрын
1,4
@Ymaximm
5 жыл бұрын
The Scalemodeling Channel tnx
@flightofsight4343
2 жыл бұрын
Nice! can the same method be applied to model airliners like the 1/200 Hasegawa Boeing 777?
@TheScalemodelingChannel
2 жыл бұрын
Yes
@JoeKrol
7 жыл бұрын
What kind of treatment do you give to the inside of the car for the door panel detail? Do you scotchbrite that too or just prime it?
@TheScalemodelingChannel
7 жыл бұрын
If i am only painting it in 1 color with the airbrush(no masking tape etc) just primer. If i plan to do more then one color(with masking tape etc) i scuff it up with some sandpaper or scotchbrite.
@joevrabel7374
3 жыл бұрын
Why do you have to sand the raised edges off?
@Chappy31x
3 жыл бұрын
Do you have a video of your paint booth set-up?
@TheScalemodelingChannel
3 жыл бұрын
A Spray booth i recommend: amzn.to/2yp5T25 The booth i made myself: kzitem.info/news/bejne/xrCGqq2DemuCZ2U
@untouchablelac93
2 жыл бұрын
I was told to use adhesion promoter not primer cause primer doesn't really stick to plastic
@TheScalemodelingChannel
2 жыл бұрын
If you prepare the surface correctly and use the right primer it sticks just fine. I have never used adhesion promoter
@davidjakubiak336
Жыл бұрын
I’m new to this. Do you need to sand the entire body, or just certain areas? What about smaller parts?
@TheScalemodelingChannel
Жыл бұрын
Yes. The entire body. Only parts that you want to mask and paint in multiple colors
@birdy369
7 жыл бұрын
should I wet sand or dry sand? I remember reading or seeing somewhere about wet sanding... and any tips on how to use little sheets of sandpaper more... ergonomically friendly? easier to handle? I've thought of wrapping them around something but I'm not sure what that something should be yet lol
@TheScalemodelingChannel
7 жыл бұрын
wetsandings gives a big mess, i preffer dry sanding.
@johnjacob688
2 жыл бұрын
Noticed that the Mk1 body doesn't have the quarter window rails.
@PennyBenjaminTG
4 жыл бұрын
Do you still use scotch brite pads?
@Maty-fisherman
Жыл бұрын
where did you get the stand from? please
@TheScalemodelingChannel
Жыл бұрын
Tamiya spray stand
@jslute
5 жыл бұрын
You showed a bottle Tamiya surface primer at 7:23.Any idea how i would thin it for airbrush? I do agree with you it is a fantasic primer but where i live it $15 a can.
@TheScalemodelingChannel
5 жыл бұрын
You can buy small bottles of it aswell from tamiya. Or decant it
@napadaanlng69
8 жыл бұрын
1.) what is the best grit of sandpaper to smooth plastic kits before applying primer? 2.) Do i have to necessarily sand the plastic kit after i apply the primer or is it just fine to go straight with the paint?
@TheScalemodelingChannel
8 жыл бұрын
6 or 800 no its optional but it does inprove the end result(less orange peel)
@napadaanlng69
8 жыл бұрын
you have the most greatest videos about scale modelling. thanks
@lachyl7107
2 жыл бұрын
Do you wash the parts your painting before painting g
@TheScalemodelingChannel
2 жыл бұрын
I personally never have
@steveschilbe8165
2 жыл бұрын
Which Scotch Brite pads do you use? There seems to be a huge variety of them available. Thanks!
@TheScalemodelingChannel
2 жыл бұрын
After this video i stopped using them. They are very inconsistent. I now just use 600 grot sandpaper
@steveschilbe8165
2 жыл бұрын
@@TheScalemodelingChannel thank you for this info as well as the plethora of info you provide us all through your videos!
@mshanejsmodelsnstuff2865
6 жыл бұрын
A golf? Didn't know they made a kit for that vehicle. If you want to guild a golf, I have one in my barn my son started on and left in pieces parts. LoL
@EnglishBoyHere
6 жыл бұрын
M. Shane J Do you still have it ?
@dougwarren2992
3 жыл бұрын
Hi, In the process of painting my 1/18 scale model. I have removed all existing paint so I am back to bare metal. I had some side moldings on the doors and front and rear sides, which I have removed using an electric sander. My question to you is can I go ahead and spray primer or should I go over the car with a 600 grade sandpaper as you have in this video? I ask this as your model appears to still have paint on it.
@TheScalemodelingChannel
3 жыл бұрын
My models is plastic. Before you apply primer, always sand. This is the way the primer can “grab” on to the body/parts
@dougwarren2992
3 жыл бұрын
Thanks for the advice. What grade sandpaper do you suggest for my metal body?
@TheScalemodelingChannel
3 жыл бұрын
400 or 600
@anthonygalpin9223
3 жыл бұрын
Any point laquering gloss black
@TheScalemodelingChannel
3 жыл бұрын
If you want to improve the gloss
@BlackLabel2021
4 жыл бұрын
But why did you mark the body lines with a marker? I don't understand the purpose of that.
@TheScalemodelingChannel
4 жыл бұрын
I mark the moldlines. To show where they are. And then use the markings as a guide for removing them
@lucaabsmann379
5 жыл бұрын
Wich size of airbrush to you take ?
@ihateliberals518
8 жыл бұрын
what's the reason for the permanent marker? is it like a guide coat, to make sure it's sanded flat?
@TheScalemodelingChannel
8 жыл бұрын
Exactly as you said it, its a guide coat
@ihateliberals518
8 жыл бұрын
The Scalemodeling Channel any tips for painting with lacquer(nail polish) with an air brush? I've always painted with enamel rattle cans. I've been told you mix it with a medium heat thinner at 2:1. is that right?(2 parts paint to 1 part thinner)
@TheScalemodelingChannel
8 жыл бұрын
+gary williams sorry man, no clue. I've never worked with naul polish before. Though just like any other paint: when thinning for airbrush use, i go for a milk thickness
@Skaters1517
7 жыл бұрын
What sandpaper did you use (number wise) to sand the body after using the sanding sticks?
@TheScalemodelingChannel
7 жыл бұрын
Skaters1517 600
@muhamadfaisal5170
6 жыл бұрын
what's the differences between using sanding stick and sandpaper? do you use the same grit? how about using sandpaper only without sanding stick? thanks for your tips anyway..
@TheScalemodelingChannel
6 жыл бұрын
+Bigfai Channel a sanding stick is rigid. Wich makes it easier to just touch the high spots. Sanpaper can create low spots arround the high spot. The same grit aplies
@muhamadfaisal5170
6 жыл бұрын
The Scalemodeling Channel thanks for the answer..
@Mehboobmehbooba12
7 жыл бұрын
great
@wayfarer198
7 жыл бұрын
Your videos are very informative thank you. Do you prime all the small parts engine etc or just the larger ones body /chassis?
@TheScalemodelingChannel
7 жыл бұрын
Wayfarer every part that gets painted with the airbrush, gets primer, except clear parts
@wayfarer198
7 жыл бұрын
The Scalemodeling Channel OK thanks
@billysayers7941
2 жыл бұрын
What colour primer could I use for Gray?
@TheScalemodelingChannel
2 жыл бұрын
Grey
@billysayers7941
2 жыл бұрын
Ok thanks
@raGEEE1986
8 жыл бұрын
Just a question , could you use tamiya x/xf pots airbrushed over vallejo air grey primer ?
@TheScalemodelingChannel
8 жыл бұрын
I think that should be fine, as far as i know they are both acrylic.
@eldiablo7024
6 жыл бұрын
Do you just use a normal permanent marking pen to mark out the mould lines?
@TheScalemodelingChannel
6 жыл бұрын
Yes
@eldiablo7024
6 жыл бұрын
Thanks
@NeonsStyleHD
6 жыл бұрын
Do you sand the entire model before painting or just the mold lines? Also, I'm having problems sanding with 1200 sand paper it just takes the paint off my test piece I'm using to learn how to do this.
@TheScalemodelingChannel
6 жыл бұрын
I do sand the entire body Then either the primer is not thick enough or you are sanding to much
@NeonsStyleHD
6 жыл бұрын
Thank you.
@Erilis000
8 жыл бұрын
Thanks for the video dude. I'm new to modeling and this helps a lot. What kind of set up is that you're working in though? Where did you get that metal box or what is it called? Thank you.
@TheScalemodelingChannel
8 жыл бұрын
What do you mean with metal box?
@Reidy82
8 жыл бұрын
Possibly means the spray booth..?
@TheScalemodelingChannel
8 жыл бұрын
well, that is a sparmax booth, but is plastic:P
@birdy369
7 жыл бұрын
or is it the stand he's referring to? it's made by tamiya... I THINK, and that's all I know!
@randallsaunders8927
8 жыл бұрын
What is the psi setting for the airbrush?
@TheScalemodelingChannel
8 жыл бұрын
35psi
@willieobermann1528
6 жыл бұрын
I would like to purchase sanding sticks.
@mr.joshua204
6 жыл бұрын
What's the name of that spinning holder thing that you are using to hold the body
@TheScalemodelingChannel
6 жыл бұрын
Tamiya spray stand
@stemoleum
6 жыл бұрын
I did a very bad paint job on my 911 (i'm on my 4th model build now). Is it possible to remove all the paint using thinner? I already gave it a try but it takes so long to remove as I had 4-5 coats and I'm thinking of dipping the whole body in thinner or just buy the kit again but I already invested a lot of time in it. your input is greatly appreciated and your work is very meticulous and above all I like your voice and accent as it's very clear and easy to understand. Cheers from Boston!
@TheScalemodelingChannel
6 жыл бұрын
Best to buy a new one. Do not dip it in thinner!
@svdj80
6 жыл бұрын
If it is acrylic paint you have used? It may work to drain a cotton cloth with sealing foam-pistol cleaner and work it in. You may do this several times if you have thick layers of paint. But unfortunately it´s quite expensive, at least here where I live ;)
@AlexDraghina
6 жыл бұрын
For acrylic - I used some auto break fluid. I let the parts soak in for about 20+ minutes, then I used a toothbrush to clean it off - it worked really well. But be careful with the break fluid - use rubber gloves, and discard of it properly (I put it back in the bottle for future use, but I will return it to an auto repair shop for disposal). Another (safer) alternative would be a windows cleaning product that contains ammonia, but I haven't found any around here.
@svdj80
6 жыл бұрын
Integrering to hear. Break fluid has never worked for me if the paint is dry and even have an acrylic clearcoat on top. I had a model in such bath for 2 years and it didn't bite really. Maybe that the break fluid is too environmental friendly here.
@AlexDraghina
6 жыл бұрын
Daniel Jansson hehe. I had these parts marinate in water with dishwashing soap for a few weeks, with no results. While with this break fluid (dot 3, the cheapest I could find), it rubbed off right away. Maybe it's the clearcoat that it's more protective? (I hadn't painted the clearcoat, it was raw acrylic paint).
@amanzon274
3 жыл бұрын
Hi! Why do you mark all the lines in black and after that you sand it?
@TheScalemodelingChannel
3 жыл бұрын
Its a guidecoat to show the progress in removing the mold lines
@amanzon274
3 жыл бұрын
@@TheScalemodelingChannel why should you do it? if i start paint the plastic body as it is this will be less professional?
@upendoluv3605
4 жыл бұрын
what grits did you use to remove the black in?
@TheScalemodelingChannel
4 жыл бұрын
600
@nejcftv3792
3 жыл бұрын
Why do I need to use primer?
@TheScalemodelingChannel
3 жыл бұрын
To get better adhesion for the paint and a better finish
@q3znw6j88aywnwy
8 жыл бұрын
The tamiya primer is really thick
@billgoodnu
6 жыл бұрын
Do you wipe the body or for that matter any parts with anything prior to painting, with alcohol, mineral spirits etc.?
@TheScalemodelingChannel
6 жыл бұрын
I don’t
@wayneoh7710
7 жыл бұрын
Excellent video and tips!! May i know what is the purpose of the primer?
@TheScalemodelingChannel
7 жыл бұрын
It helps the paint stick better and remove tiny imperfections or scratches in the plastic.
@wayneoh7710
7 жыл бұрын
The Scalemodeling Channel thanks for the quick clarification, so if i want my model to be white, can i just use a white primer without white paint?
@TheScalemodelingChannel
7 жыл бұрын
wayne oh if that is the shade of white you want and the finish you want to have your model in. Sure
@wayneoh7710
7 жыл бұрын
That is great!! Thank you very much for the tips. Appreciate it
@diegomiranda853
8 жыл бұрын
Im new to scale modeling so what's that part that's holding the model car body while it was getting painted
@TheScalemodelingChannel
8 жыл бұрын
Tamiya paint stand
@saragarnham
4 жыл бұрын
I accidentally picked up a rough sand paper and I am seeing the scratches all over my shell. The spray is not filling it in and still seeing the scratches. Is there a way I can fix this?
@TheScalemodelingChannel
4 жыл бұрын
Sand it with a finer grit and start over
@saragarnham
4 жыл бұрын
@@TheScalemodelingChannel ok thank you
@ruggeda55
5 жыл бұрын
Where can I buy that body holder you're using? Is that homemade?
@TheScalemodelingChannel
5 жыл бұрын
i have links in the description.
@kayavanekeren9673
4 жыл бұрын
can some one help me and tell me what is te name of the thing what he car body is holding while he is painting it what is the name for that thing ?
@TheScalemodelingChannel
4 жыл бұрын
Tamiya spray stand
@bofa83
2 жыл бұрын
I sand the body and the scratches show through the primer, and then the paint, what am I doing wrong?
@TheScalemodelingChannel
2 жыл бұрын
What grit of sandpaper are you using?
@bofa83
2 жыл бұрын
@@TheScalemodelingChannel 400.
@TheScalemodelingChannel
2 жыл бұрын
@@bofa83 thats to course, try atleast 600 or 800
@bofa83
2 жыл бұрын
@@TheScalemodelingChannel oh ok. Thank you.
@TheMrrobbie1997
8 жыл бұрын
Do you have any experience with revell airbrush kit wich you plug into the wall?
@TheScalemodelingChannel
8 жыл бұрын
Jazeker. Die zijn ontzettend slecht. Je kan beter even door sparen voor bijvoorbeeld een harder en steenbeck
@TheMrrobbie1997
8 жыл бұрын
The Scalemodeling Channel Het is juist dat ik nog maar net begonnen ben en niet weet of ik het kan/leuk vindt. Dus om er 200 euro in te steken en er dan achter te komen dat ik het niks vindt zou kak zijn :) Wat raad je aan voor mensen met een budget? Een beginners set
@TheScalemodelingChannel
8 жыл бұрын
Om het te proberen zou ik even aankloppen bij airbrushservice almere. ze hebben daar van laag tot hoog en weten je perfect te adviseren ;)
@jamesadams661
5 жыл бұрын
Do you need to sand or use micro mesh on the body work after the coats of primer?
@TheScalemodelingChannel
5 жыл бұрын
That depends on how smooth the primer is. It can’t hurt though to smoothen it out with 2000 grit
@jamesadams661
5 жыл бұрын
@@TheScalemodelingChannel was planning on using zero paints primer w/ airbursh. Just give it a light sanding?
@TheScalemodelingChannel
5 жыл бұрын
James Adams jup
@joshdunn101
7 жыл бұрын
what grit sand paper should I use to sand the lines?
@TheScalemodelingChannel
7 жыл бұрын
400 or 600
@WayneModz
7 жыл бұрын
where can i buy this kit
@johnoliver2442
6 жыл бұрын
Hobby lobby
@IvanIdsinga
8 жыл бұрын
Hi! Cool video's. Volgens mij ben je Nederlands toch? Hoe kom je aan de standaard die je gebruikt om de modellen op te klemmen? Alvast bedankt en mvg, Ivan
@TheScalemodelingChannel
8 жыл бұрын
+Ivan Idsinga Dit is een Tamiya Spray stand
@IvanIdsinga
8 жыл бұрын
+The Scalemodeling Channel Thanks!!
@Dillusionz
7 жыл бұрын
what grid sandpaper u use to remove the mold lines.
@TheScalemodelingChannel
7 жыл бұрын
Daryl Chew 600
@buwaya5704
8 жыл бұрын
can i use epoxy primer with catalyst with lacquer thinner on scale model?
@TheScalemodelingChannel
8 жыл бұрын
I think you can is if is sutable for plastic, though i have never used it before.
@buwaya5704
8 жыл бұрын
thanks
@Teggymania
7 жыл бұрын
Would you recommend handpainting the body?
@TheScalemodelingChannel
7 жыл бұрын
hello there no. Not at all
@Teggymania
7 жыл бұрын
The Scalemodeling Channel Okay, thanks.
@birdy369
7 жыл бұрын
Hello There unfortunately I'll HAVE to hand paint mine. I've seen a video on here of a guy who hand painted his model car, and it didn't turn out bad at all. he used very very thin coats of paint to avoid brushstrokes. and a lot of layers of thin coats too, he went about it very meticulously. now it will not give that perfect "like the real thing" finish, but as I said it didn't look bad at all. I'm only on my second scale model, first car, my first build was a Revell titanic (1:400 I believe? I'll have to check that) and I hand painted it. It turned out pretty well, not as well as I could have done, (had to rush it, it was a last minute Christmas gift) but brush strokes weren't extremely obvious to the eye.
@alexoliver5649
7 жыл бұрын
Is it possible to airbrush the tamiya primer?
@TheScalemodelingChannel
7 жыл бұрын
yes
@ibrahimmalik6612
2 жыл бұрын
Is this a 1.1 scale
@TheScalemodelingChannel
2 жыл бұрын
1:24
@styrenehelp
7 жыл бұрын
new to modelling. why mark in black pen and sand off?
@TheScalemodelingChannel
7 жыл бұрын
C Haslam mark it so you know where it is. And when sanding you know when it is gone
@justjason-nl
Жыл бұрын
do you really need primer?
@TheScalemodelingChannel
Жыл бұрын
For the best results and durability of the paint, yes.
@dominicb3449
8 жыл бұрын
hey im going to build a enzo ferrari any tips or trixs and it a revell kit
Пікірлер: 282