How to prevent your hubs from failing off or losing them.
Website: 4diyers.com
Patreon: / 4diyers
Facebook: / 4diyers
Twitter: / 4diyers
Instagram: / 4diyers
Tumblr: / 4diyers
Pintrest: / 4diyers
Tools/Supplies Needed:
-cable ties
-pliers
-cutters
Procedure:
Not all hub caps fit the same, especially if you have aftermarket versions.
First is adjusting that tension ring which forces those clips out again on your steel wheels. It’ll have a small kick out portion in this metal ring, you can use pliers to straighten it out slightly. It doesn’t take much to enlarge the ring for slightly more tension.
Make sure the ring is straight, then install it back into the hub cap.
Once that hub cap is clipped into place, now is the next method.
A guaranteed way to keep these hub caps in place is using cable ties. You can get them in various colors and lengths to suit your hub cap style.
Hold the hub caps in place by wrapping the cable ties around the spokes and through the holes in the steel wheels.
Then trim off the access using some form of cutter. Here I have installed 3, that’ll be enough to hold them in place.
Thank you to all those who watch my videos and support my content. Don't forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week!
© 4DIYers 2013
All Rights Reserved
No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.
Негізгі бет Автокөліктер мен көлік құралдары How to Prevent Hub Caps from Falling Off
Пікірлер: 31