Hey man, I got epson f2160 dtg printer .. can I print dtf on it??
@luisgonzales-hc3sl
12 күн бұрын
Great video, new sub
@ComingSoon1000
3 жыл бұрын
GoonLife for daily print videos !!! Real advice
@biianconeri1897
4 ай бұрын
hello would you have any top settings to do dtf with the gtx thank you
@amedionteo
4 ай бұрын
Been awhile since i use gtx for DTF. You gotta try search for most recent workable settings. Also depends on the film that youre using.
@Paios
3 жыл бұрын
They sell black powder adhesive for dark garments by the way. Less noticeable
@viktorperalta3090
3 жыл бұрын
I want one of those for Christmas 😭
@TylerLove
3 жыл бұрын
Love the videos. Super helpful and you had me laughing when you tore the shirt 😂
@pearldrummerbrx
2 жыл бұрын
Have you ever had any registration issues? I am having problems. The top part of platen is out of reg. the bottom is fine. Doesn’t make sense
@amedionteo
2 жыл бұрын
No issue at all. Your film lay down flat?
@inkaprintclt8004
2 жыл бұрын
Will screen printing powder adhesive work for this?
@primaessenza6414
3 жыл бұрын
Hi, I have an Epson L1800 dtf printer. What format must the files be in so that the print comes out ok? On some designs it comes out good on others not. On those who do not go well, when we go to put on the shirt, the sheet does not peel off easily and it takes a bit of print with it. Can you tell me how to solve? Thank you
@amedionteo
8 ай бұрын
Sorry didnt receive notification for your msg. Guess u have it solved dy. Anything can text me at my social media
@jameswhiting987
8 ай бұрын
What is the oven you use and why do you use that?
@amedionteo
8 ай бұрын
Its just normal cooking oven. For users who dont want to invest on the big heater.
@Cheeze__it585
3 ай бұрын
Do you use oven for dtg shirts to cure ink ?
@DTGMerch
3 жыл бұрын
Hey Teo! Thanks very much for the video.
@maki3832
3 жыл бұрын
How many wash before the design fade? Will it last long?
@amedionteo
3 жыл бұрын
Depending on the ink you use. Ours don't see sign of fading yet after several washes.
@personalizarihaine259
3 жыл бұрын
quick question. The oven its preheated or its 2 min with the warmup?
@amedionteo
3 жыл бұрын
Preheated
@mohamaddorgham2061
3 жыл бұрын
Can i use gt3 for that?
@MikeTees
3 жыл бұрын
great video keep being great !!!!!!!
@Remember.0-0
3 жыл бұрын
Hi bro, what’s number of pressure you use on heatpress?
@henrikbach2408
3 жыл бұрын
Hi. Great Video. Can you recommend a supplier for the PET film? Thanks
@amedionteo
3 жыл бұрын
You will need to source from your local dealer. I got it from my local supplier
@boomertees
2 жыл бұрын
is it really worth all that time and steps instead of just printing the shirt?
@amedionteo
2 жыл бұрын
if single image then use DTG better unless u have other than cotton material that pretreatment wont work. If logos then very worth it cause one film can have multiple logos then u just heat only. Dont have to pretreat 1by1.
@hustleruk
3 жыл бұрын
You make some cool videos bro, keep it up! What do you think of the new epson f3070, we run few printers in UK ,
@amedionteo
3 жыл бұрын
Depends on your business. If you have the space and budget for conveyor then its good. I still prefer Brother GTX
@foyarwof7329
3 жыл бұрын
Can I do it on honey comb polo shirt and dri fit shirt?
@amedionteo
3 жыл бұрын
Yes you can.
@afrikanChick
3 жыл бұрын
No need to pretreat with this process? Is this process a good option for printing on 100% polyester or poly blends?
@amedionteo
3 жыл бұрын
Nope you don't have to pretreat if using DTF. The glue will do the job. Careful when pressing on polyester due to Dye migration.
@daalipshala5335
3 жыл бұрын
in which side of film to print in a positive side slippery or at the other little bit astringent ?
@amedionteo
3 жыл бұрын
Print on matte surface the non-slippery side.
@hamizishah3177
2 жыл бұрын
I follow your setting preset 100% but the ink still smearing on cmyk and white, I'm waiting for cmyk about 1 min to dry but still wet and smearing
@amedionteo
2 жыл бұрын
You need to get other PET film
@symphonix3
3 жыл бұрын
Great video...thanks for doing this. Did you figure out why there was too much white ink on the final print at the end of the video?
@amedionteo
3 жыл бұрын
Yeah i used level 3 white volume
@symphonix3
3 жыл бұрын
@@amedionteo So just need to turn white down as much as possible? What RIP are you using?
@amedionteo
3 жыл бұрын
@@symphonix3 yea. Can only use level 1. Im using graphic labs.
@jorgeorellana7573
3 жыл бұрын
I just made some dtf printing but I noticed the white turns grey and very opaque when I apply the transfers on black/dark shirts. Any idea why that happens?
@amedionteo
3 жыл бұрын
Not enough white inks and also dye migration. Try heat at lower temp and time say 140c 8s but depending on your PET film and Glue powder requirement as well.
@jorgeorellana7573
3 жыл бұрын
@@amedionteo thank you
@delhitshirts2712
3 жыл бұрын
Can we dry powder from flash dryer also?
@amedionteo
3 жыл бұрын
Yes u can with the right temp and time.
@constantinmarian2934
3 жыл бұрын
Hi. Can these be transfered on plastic with a hot gun? Thanks
@amedionteo
3 жыл бұрын
I don't think it sticks well on plastic.
@KLSeba
3 жыл бұрын
Mind me asking what is the software you use for your GTX? and If you get any 3rd party, how much did it cost you? Cheers
@amedionteo
3 жыл бұрын
I only use Graphic labs for this testing. I heard cadlink can do it in a pass but i dont have it to try.
@Vianest23
2 жыл бұрын
bro can i use my epson L1300 convert to DTF?
@amedionteo
2 жыл бұрын
Yeah many ppl do that.
@Vianest23
2 жыл бұрын
@@amedionteo thanks for ur reply bro. they convert L1800 not L1300. pls help me send any video who do that thanks bro. working from bedok north before.
@studiolive5697
3 жыл бұрын
are you using solvet ink or normal garment ink?
@amedionteo
3 жыл бұрын
It's DTG ink.
@D--TamimAbdullahRayed
3 жыл бұрын
Did you print on Cotton tshirt ?
@amedionteo
3 жыл бұрын
Yea
@NERO-ez1mn
3 жыл бұрын
what application are you using?
@amedionteo
3 жыл бұрын
Hot melt powder glue
@蔡秀华-d6o
3 жыл бұрын
Are you using dtg ink or dtf ink?
@amedionteo
3 жыл бұрын
I'm using Brother GTX so it's dtg ink
@MikeTees
3 жыл бұрын
do you sell transfer for us to try !?
@amedionteo
3 жыл бұрын
No sorry i just bought for testing and own use. We dont sell
@lincolnwalters
3 жыл бұрын
Do you need to reverse the image in photoshop before laying down the CMYK and White on the film?
@amedionteo
3 жыл бұрын
Yea you will need to mirror the image first. Sorry I didn't mention in the video.
@lincolnwalters
3 жыл бұрын
We have 2 GTX’s and recently bought the dtf film and hot melt powder but would love to see a couple more videos of how you do it. When I created the cmyk image and put the setting on 2 ink volume and 1 double print the color ink came out a little spotty. Any thoughts, or recommendations? Also, when we put the powder on I had a hard time getting the excess powder off the areas that did Int even have ink on it.
@amedionteo
3 жыл бұрын
@@lincolnwalters make sure you're printing on the correct side. The matte area is the print side. Try to pour the powder evenly instead of doing it like i did.
@maudlinmerchandise
3 жыл бұрын
@@lincolnwalters we have the exact same issue. Might be the paper or the powder that are not ideal for the GTX
@amedionteo
3 жыл бұрын
@@maudlinmerchandise gtx lowest white setting still alot. If able to reduce one more level it would be perfect.
@clementcatabas9318
3 жыл бұрын
Any type of fabric?
@amedionteo
3 жыл бұрын
Yes can heat on most fabric
@shutupsamir
3 жыл бұрын
why do you use that type of film instead of transparent film?
@amedionteo
3 жыл бұрын
Thats PET heat transfer film. Not normal transparent film bro.
@mugeemugzgaming
3 жыл бұрын
Where can I buy a dtf printer?
@amedionteo
3 жыл бұрын
@@mugeemugzgaming you need to source from China.
@yourunclesam6780
3 жыл бұрын
@@mugeemugzgaming I have one for sales NEW one
@JackNapoli
3 жыл бұрын
hello, can I ask you what kind of sheet did you use and the values set for printing?thank you
@amedionteo
3 жыл бұрын
Its PET film for heat transfer. Not sure what u mean by value. Cost?
@JackNapoli
3 жыл бұрын
@@amedionteo not cost, parameters for printing
@JackNapoli
3 жыл бұрын
And where can I buy this PET film?
@amedionteo
3 жыл бұрын
@@JackNapoli you need to source in google bro. My local supplier dont sell internationally. The values 100 white and the rest 80.
@amedionteo
3 жыл бұрын
@@JackNapoli oops sorry. This is GTX video. Not L1800. I think u refer back my video i have mentioned.
@maksimmakarov4145
3 жыл бұрын
Hi. Thank you for your video.Did you use orginal Brother inks in this video?
@amedionteo
3 жыл бұрын
Yes genuine Brother GTX ink. Thank you.
@maksimmakarov4145
3 жыл бұрын
@@amedionteo Thank you. It's good news for me.
@amedionteo
3 жыл бұрын
@@maksimmakarov4145 good luck testing it out bro.
@蔡秀华-d6o
3 жыл бұрын
Are you using same ink to dtg print and dtf print?
@amedionteo
3 жыл бұрын
@@蔡秀华-d6o for this video yes. for actual production i use dtf ink on L1800
@eastduststudio.comwebsite5258
3 жыл бұрын
what the size of that heat press?
@amedionteo
3 жыл бұрын
It's 16"x20"
@eastduststudio.comwebsite5258
3 жыл бұрын
@@amedionteo Thanks for the reply..
@jorgeorellana7573
3 жыл бұрын
What’s the paper that you printed on called?
@amedionteo
3 жыл бұрын
PET film.
@jorgeorellana7573
3 жыл бұрын
Thank you. So I do own a DTG printer. Do I print color first and then the white or how does that process work?
@amedionteo
3 жыл бұрын
@@jorgeorellana7573 u may refer the video again bro. First u print CMYK followed by white. Basically you need 2 files. Both needs to mirror.
@ComingSoon1000
3 жыл бұрын
Goonlife for daily print videos
@daniellow7340
3 жыл бұрын
Hi.. May i have your personal contact for more details info about this DTF??
@amedionteo
3 жыл бұрын
Sorry i don't sell the product. I just provide guide on how to make it with GTX. :)
@daniellow7340
3 жыл бұрын
@@amedionteo Hi Amedion, understood... I'm trying according to your guide for Driver Settings unfortunately i got worse result which CMYK not solid and migration after print White colour... May i have more details about your driver settings please....??
@amedionteo
3 жыл бұрын
@@daniellow7340 did u wait for the CMYK to dry first?
@daniellow7340
3 жыл бұрын
@@amedionteo Yes but when it dry the colour become spread not solid at all... How is your CMYK driver setting??
@amedionteo
3 жыл бұрын
@@daniellow7340 CMYK level 2 and white highligh level 1. Anything more than that will smear. Need to try other PET film tho. Check if u print the roght side.
@boomertees
2 жыл бұрын
edges are fuzzy looking
@amedionteo
2 жыл бұрын
put to much powder and didn't clear it properly. :)
@rickrivera8576
3 жыл бұрын
With CADlink Digital Factory v10 Apparel, Brother Edition we can send the data as a single print job, no need to send 2 files to the printer. We also will offer DTF print modes that allow you to also include halftone holes and stripes to your designs, something you cannot to with Graphics Lab. You can find me on the DTF Users Group on FB: facebook.com/groups/3264492083648783
@viprosigma
3 жыл бұрын
Visca el Barca
@dannycb1000
3 жыл бұрын
I cannot recommend this printer for business. This is only for hobbyist and no intention to make money. My opinion only. The machine is to expensive ang it takes a lot of maintenance and the material is to expensive. clients cannot afford to pay for the output. So many ways to print with the almost same qauality. You have to bear in mind that this is still inkjet.
@amedionteo
3 жыл бұрын
Depends on what business you're doing. If you're getting this printer to print volume vs screen printing/heat transfer then of course this is not for you. When you have the market such as print on demand then you will definitely opt for this printer. In my case, i have many clients doing good doing print on demand and also some thinks like you where they trying to fight different printing market.
Пікірлер: 121