Hi are you using the Autel maxiflash JVCI J2534 with the Honda OM software ? What is the main reason to update a ECU and ABS on this car ? thanks in advance !!!
@JVFIXLLC
Жыл бұрын
yea I am using the autel j2534 and yes using the same program the dealership uses. the reason I updated the ecu was by request of the customer. and also if you swaped from a used one you can use the program to change the vin# cause sometimes with the scanner u can't.
@DanielPerron-l9o
Жыл бұрын
Cool stuff, great video. What kind of scanner are you using ?
@JVFIXLLC
Жыл бұрын
thanks. I always use the autel im608 it is expensive but it does so many functions
@multiDomains
23 күн бұрын
How did you connect both scan tool and J2534 at the same time? Both of them use the same port, right?
@JVFIXLLC
19 күн бұрын
Yes u right
@upcars
8 ай бұрын
Hello Friend, first I want to congratulate you on the great video. I would like to ask you kindly, do you know how to "cancel" the error on panel "D" Flashing signaling on the scanner that the error is about lack of communication with the ABS module, but the original vehicle does not have the ABS system in the old one ECU. I don't know if I explained my question correctly. Thanks
@JVFIXLLC
7 ай бұрын
the software is downloaded once you pay for the subscription, but I'll see if I. can downloaded it and send it to you
@upcars
7 ай бұрын
@@JVFIXLLC Hello friend, I sincerely thank you for your help and attention. thanks
@diegochan3351
Жыл бұрын
Hi great tutorial where are you located? I need a ECU program!.
@JVFIXLLC
Жыл бұрын
thanks. I am located in visalia California area I do mobile service
@diegochan3351
Жыл бұрын
I’m in New York! Can you do stuff remotely I pay you!. I have a brand new ECU for a Honda Civic just program no tune!.
@hchhon
3 ай бұрын
Question. I need to replace my ECU/PMEU on my 2007 TL. Can this software be used to reprogram the immobilzer to the new ECU?
@JVFIXLLC
3 ай бұрын
yes it can
@hchhon
3 ай бұрын
What are the hardware and cables do I need?
@HasanShahriar-u6t
Ай бұрын
Hello friend, Can you please help me about one matter? I have a Civic 2018 JDM version. It is speed limit activated. Dear, Can you please suggest me how can I remove it please?
@starksolution14
7 ай бұрын
Is it a single payment to download the software and in the future if you want to reprogram another control unit do you have to pay again?
@JVFIXLLC
7 ай бұрын
is a single payment for 2 days and you. an program any honda, but after the 2 days, you need to pay again.
@starksolution14
7 ай бұрын
Thank you, would you have the official Honda link for Latin America or America?
@epescina80
Ай бұрын
If ibreplace my abs module can a scanner like yours reprogram it?
@JVFIXLLC
Ай бұрын
Yes it can also the launch scanner x431pro can do it. And is much cheaper
@dennysrodriguez9200
18 күн бұрын
Can this work on a Honda accord 2018
@JVFIXLLC
17 күн бұрын
yes it can
@JeffPentecost
5 ай бұрын
Whay are you using to connect to the car from the PC? Is it the autel J2534 driver?
@JVFIXLLC
5 ай бұрын
I used the autel j2534 jvci and the drivers for the tool are in the official website
@hchhon
3 ай бұрын
@@JVFIXLLC
@segounlocks5029
11 ай бұрын
Do u need nastaf for push start bcm
@JVFIXLLC
11 ай бұрын
no u do not
@charlyreyesolivares197
Жыл бұрын
thanks very interesting thanks for sharing regards
@JVFIXLLC
Жыл бұрын
thanks and thank u for visiting the channel.
@mardoom641
8 ай бұрын
Where is the link to get software? Can you please share
@JVFIXLLC
7 ай бұрын
the software is downloaded once you pay for the subscription, but I'll see if I. can downloaded it and send it to you
@wedolocksmithorlando
11 ай бұрын
hey to buy a subscription its need nastf?
@JVFIXLLC
11 ай бұрын
only if you are getting key cutting codes if u want to flash ecus you don't need nastf
@wedolocksmithorlando
10 ай бұрын
what about program keys?@@JVFIXLLC
@MarioHernandez-bn6pm
5 ай бұрын
What do you mean “ a driver , for your tool.”
@JVFIXLLC
5 ай бұрын
every tool to communicate with the car has a specific driver developed from the manufacturer. you need them in order to make the tool work an communicate with the car
@MarioHernandez-bn6pm
5 ай бұрын
@@JVFIXLLC okay. i see. i have a maxi flash VCI j2534. where can i get the drivers for this pass through. thanks.
Пікірлер: 38