I totally enjoyed making and sharing this video!😊 Hope you like it! Have you used an XTOOL device to program keys to a Mercedes-Benz? What's your experience?
@Swiftkeyautolocksmith
10 ай бұрын
hello, does ik608 program benz all keys lost???
@Uc9uE3pKsS6uQ
8 ай бұрын
yes, but additional adapter need M821@@Swiftkeyautolocksmith
@roberttischler7721
8 ай бұрын
Can u program a used key fob?
@Mark-s2v
Ай бұрын
Did he answer@@roberttischler7721
@chloemarchese4626
3 күн бұрын
Hi, great video. I have a 2001 W-210 so this unfortunately this doesn't address the question I have for my vehicle. I lost my Fob, but have a valet key that works to start my car. My question would be... can I have a key programmed from my valet key. I know it won't operate the security system because it's not the FOB that has that info stored. Do I need to go to Mercedes Benz to have a new FOB created or is there an alternative way? Thanks so much.
@bobbyomekam8043
Жыл бұрын
Finally here... Thanks a bunch sir
@DIYAutoworksNG
Жыл бұрын
Thanks, boss. I was about to ping you that another rascal is on the loose 🤣
@bobbyomekam8043
Жыл бұрын
@@DIYAutoworksNG hehehe, give me licence to catch it (501) 😂. By the way have you made a video on it alone? Can't remember
@DIYAutoworksNG
Жыл бұрын
🤣 Haven't done a deep dive on it alone. What I've just done for it is the unbox and quick walkthrough in the IK618 review video.
@vanrysel7734
3 ай бұрын
is it better than XTOOL PADS?
@DIYAutoworksNG
2 ай бұрын
Haven't done a head-to-head to be honest.
@ezekielolabode6418
Жыл бұрын
Can IK618 programming tools installed a total lost key to ML 2015 Mercedes Benz. If the tools can and not available to do the installation, what are way round can a key be made available in such circumstances. Please, this is current situation am in as an Auto- key programmer. Thanks
@ezekielolabode6418
Жыл бұрын
I found out from the feedback you gave, suggesting Autel programing tools. Which Autel products mostly appropriate for programing Benz cars? I was once ordered for Autel DS 808 before I lost it. Now am really bothering how I could replace it with more sophisticated tools from Autel.
@ezekielolabode6418
Жыл бұрын
Please, my case is very urgent on this very findings. Am currently on the hot seat to install a genuine smart key for ML 350, 2015 Mercedes Benz. The Vehicle was cleared from importion a month
@DIYAutoworksNG
Жыл бұрын
The IK618 will not program AKL for the 2015 ML. Autel will not either. I don't also think there's a 3rd party tool on the market that will program that car except Mercedes' in-house tool. I could be wrong, but that's what I've found so far.
@j22bwrxsti
Жыл бұрын
Mind me asking how you find the ik608 Vs the d7 your videos on the d7 was enough for me to order one but only seen about the ik608 coming out after I ordered it
@DIYAutoworksNG
Жыл бұрын
Both are good devices. It depends on the level of work that you do. The IK618 is the more advanced in terms of key programming and coding. But the D7 holds its own if you don't require these advanced features. The IK618 is almost 3 times the cost of the D7!
@bobbyomekam8043
Жыл бұрын
Felt same bro but take heart... 👍
@Mustnged
Жыл бұрын
@@DIYAutoworksNG I have xtool d7 and pretty sure it doesn't program Mercedes key. I was looking to get the xtool x100 along with xtool m8021. Will these work just as well?
@DIYAutoworksNG
Жыл бұрын
I don't have experience with the X100 yet, and so can't tell. Contact Tech support? Should definitely advise and they are quite responsive.
@rods715
5 ай бұрын
I have a 2006 cls55 with original key fob, keyless go working. Can I get an Afternarket key programming WITH keyless go working ?
@DIYAutoworksNG
5 ай бұрын
Very good question. I haven't tried, but I've heard other say it won't work. Seems to be more of an issue with the BE aftermarket keys. There's a dropdown for selecting if you want to make the key keyless but just not sure it'd work. If I find a Mercedes with Keyless, I'll attempt and revert. This tool won't program OEM mercedes keys though.
@rods715
5 ай бұрын
@@DIYAutoworksNG Thanks buddy, I would love to know the answer to this one! It was dealer only, but this was years ago before anyone had access to these autel and launch products.
@bobbyomekam8043
Жыл бұрын
Fbs3 I guess. Pro tip sir: the key has two types the normal type which you have, and the proximity type. Same appearance but different internals. If you program the normal to a Push Start system it will program difference will be you can't use the proximity features (the push button on the ignition and door). Another thing worthy of note sir is after programming success, as you insert the infrared keys in the EIS you'll notice the red indicator light of the key blink that shows success. Beautifully done sir normally other KZitemrs will take 15mins for this same job and 45mins for AKL procedure.
@markpasieka
11 ай бұрын
is autel coming out with a new system? looks like the IM 608 has seriously dropped in price... also what would you advise to do proximity keys and maybe diagnostics as well? would prefer not dealing with subscriptions
@bobbyomekam8043
11 ай бұрын
@@markpasieka Xhorse
@markpasieka
11 ай бұрын
that does not do infrared keys like the ones in this video for mercedes @@bobbyomekam8043
@larryreno8293
6 ай бұрын
Are the smart keys “keyless go” able to be programmed with this unit or the autel unit?
@capitalerose6410
Жыл бұрын
Great video. Helped me out a bunch for real for real. Didnt know my key worked this whole time 🤦♂️ 😂
@DIYAutoworksNG
Жыл бұрын
Thanks! 😁
@vanrysel7734
3 ай бұрын
Support for Volkswagen for Audi for Skoda 4-generation 96-bit online, 5-generation online, MQB online key matching?
@DIYAutoworksNG
3 ай бұрын
Best to check here www.xtooltech.com/english/FunctionQuery.html
@TheHkhassociates
4 ай бұрын
Finally saw this video. Awesome Will this work on my 2014 B250e full electric ?
@DIYAutoworksNG
4 ай бұрын
Thanks for the compliment! I'd say you confirm from XTOOL's function coverage tool which can be found here. www.xtooltech.com/english/FunctionQuery.html
@bobbybudd2248
Ай бұрын
Great video
@DIYAutoworksNG
Ай бұрын
Thanks
@confuzler6985
Жыл бұрын
How about later models? Can a D8 or D9 be used in combination with the KC501 instead of of the IK618?
@DIYAutoworksNG
Жыл бұрын
Yes. D8, D9 can be used with the KC501. However, the IK618 is specialised for key programming and there will be some certain instances where it will have advantages. e.g. some Dodge keys
@confuzler6985
Жыл бұрын
@@DIYAutoworksNG It is near impossible to figure out what cars are supported from their website, looking specifically for Benz x253 support. How about X100 PAD?
@DIYAutoworksNG
Жыл бұрын
If you open the right links, the w253 should either be listed or not. On the site, select products, key programmers, select the device, scroll down select immobilizer and then click on the vehicle brand. If the w253 was produced after 2016, it's not supported. Right now, I don't know any 3rd party tool that can program mercedes keys from 2017 upwards.
@jakesmith2341
8 ай бұрын
Absolutely brilliant mate, thanks for the high quality explanation
@DIYAutoworksNG
8 ай бұрын
You're welcome!
@Yusuf-r4r2o
7 ай бұрын
Hi master, is the fobik keys for Mercedes all the same. Im referring to the part that goes in the ignition. Not device/chip/mhz etc i know their different. Thank you in advance
@footballpassion6438
Жыл бұрын
Can you use the autel tool to program this key? Like the way you registered the Honda key.
@DIYAutoworksNG
Жыл бұрын
Nope. You need an additional accessory too for the Autel.
@zxcdarel
26 күн бұрын
can you make videos about bmw
@DIYAutoworksNG
26 күн бұрын
I've always wanted to. Just don't have a specimen BMW.
@MrRohanstar
Ай бұрын
Sir thanks for the video , i have the Xtool 616 what can i use the autel xp400 or is thier an xtool xp400
@DIYAutoworksNG
Ай бұрын
The IP616 won't program keys for Mercedes.
@MrRohanstar
Ай бұрын
Sir can the xtool x100pad3 program mecades w209 ezi ? Thanks in advance
@DIYAutoworksNG
Ай бұрын
It would be best to check the function list as I'm not sure. www.xtooltech.com/english/FunctionQuery.html
@peacefulsalvation
25 күн бұрын
Where do you order your blank fobs
@DIYAutoworksNG
25 күн бұрын
I got it from Amazon. Link in description.
@abdul-kabiralegbe5660
Жыл бұрын
A bit scary I must say.... Glad you were able to fill the gaps.
@DIYAutoworksNG
Жыл бұрын
Yea. I think the aftermarket key played a significant role. I'll try and see if I can get a genuine OEM benz key. To be honest the AM key wobbled a bit in the infrared slot of the KC501, whereas the OEM fit snug with no wobble. I've also written XTOOL to check on their end as well, just in case. The only one clear thing I would say is definitely on Xtool was the omission of that instruction to plug the key back to the KC501 for password reading. The other XTOOL key programmers have that line of instruction. Knowing the speed of XTOOL customer support/tech team, I expect that it should be addressed speedily.
@abdul-kabiralegbe5660
Жыл бұрын
@@DIYAutoworksNG Great info here!
@hayche
2 ай бұрын
Your videos are excellsnt!!!
@DIYAutoworksNG
2 ай бұрын
Thanks!
@coachbrandonsanders
7 ай бұрын
I have a mercedes benz e class 350 2014. Do I need to purchase the XTOLL? Or do I contact you? Just trying to get my key programmed…
@DIYAutoworksNG
7 ай бұрын
Hey thanks for watching. This has to be done in person, so you'll either buy the XTOOL with the accessories, visit the dealer or engage a keysmith. For now, I regrettably don't have the structure to support commercial services.
@JoseMariaHernandez-o4l
Жыл бұрын
I need to copy the key of my 2016 mercedes GLA (7 number key) . Its possible with this machine? If not what is necessary? Thanks
@DIYAutoworksNG
Жыл бұрын
Sorry for the delay, I missed this. I didn't find this model on the function coverage list, so I'd say no. Except it receives an update.
@mikeoparaopara7697
Жыл бұрын
Please I have D9PRO can I use it to program Benz keys or I should buy Ik618 I want to know
@DIYAutoworksNG
Жыл бұрын
The D9PRO can program Mercedes Benz keys, but you need to buy the KC501 accessory to be able to do this.
@lakelandcarkeys
Жыл бұрын
Excellent tutorial. I had the xtool pad3 and was not impressed. I also brought the kc501 which I never used. i did return the pad3, so i have a spare kc501. maybe ill give the IK618 a try. I currently use the Xhorse Key tool Plus, or the Autel IM508 +xp400. your video was easy to follow and helps beginners understand the process. Next video please do an all keys lost.
@DIYAutoworksNG
Жыл бұрын
Thanks, mate! To do all keys lost on this car, I also need the M821 which I sadly don't have...for now.
@angelrivera-dy6ur
2 ай бұрын
@@DIYAutoworksNGm821 works in 2010?
@corystephens561
8 ай бұрын
2014 Mercedes E350 the xtool with your same setup would don’t read the the original key and would not connect to read EIS. ANY RECOMMENDATIONS?
@DIYAutoworksNG
8 ай бұрын
Hey! Are you reading the EIS by OBD or simulation key?
@corystephens561
8 ай бұрын
I tried both no luck
@corystephens561
8 ай бұрын
By the my e350 is a cabriolet
@corystephens561
8 ай бұрын
I contacted XTOOL for support so far I just sent them my information but no resolution yet. But that they have responded with just questions.
@DIYAutoworksNG
8 ай бұрын
Do let us know what xtool says. Thanks!
@lowfat1713
Жыл бұрын
will this scanner do a transmission relearning procedure for subaru cars ?
@DIYAutoworksNG
Жыл бұрын
Let me take a look at the scanner over the weekend and revert.
@EndlessXConcertgoers88
Жыл бұрын
Where do you get the aftermarket remote key and where can you get the key cut? Thanks!
@DIYAutoworksNG
Жыл бұрын
Link to the aftermarket key I used is in the description. For cutting the blade, you just have to look for an automotive locksmith in your area.
@lasmiley3793
9 ай бұрын
My original key is damaged what now
@DIYAutoworksNG
9 ай бұрын
But it still starts the car? You can make a copy either by yourself or at the dealer.
@Swiftkeyautolocksmith
10 ай бұрын
can this tool work on benz all keys lost??
@DIYAutoworksNG
10 ай бұрын
Yes, but you'll need an additional accessory. The M821
@CBRRR-eh3ky
Жыл бұрын
Awesome video bro
@DIYAutoworksNG
Жыл бұрын
Thanks
@CeeeRock1
11 ай бұрын
Excellent
@DIYAutoworksNG
11 ай бұрын
Thank you! Cheers!
@Voli-YavorDimitrovi
Жыл бұрын
Hi I followed all the steps the car starts with the new key but doesn't lock and unlock any ideas
@DIYAutoworksNG
Жыл бұрын
Sure the battery in the new fob is still good? Some ship with depleted batteries.
@Voli-YavorDimitrovi
Жыл бұрын
@@DIYAutoworksNG no the frequency was the problem I changed the frequency and boom everything works perfectly
@DIYAutoworksNG
Жыл бұрын
Nice! Thanks for updating.
@davidjacobs8558
Жыл бұрын
can you reprogram used OEM Mercedes key fob? or is that something impossible?
@DIYAutoworksNG
Жыл бұрын
It won't program used OEM keys. Only BE aftermarket keys.
@davidjacobs8558
Жыл бұрын
@@DIYAutoworksNG Can the Benz Dealer reprogram a used key to different vehicle (assuming same model) ? or is it just impossible? and can this device program a genuine Mercedes blank key?
@DIYAutoworksNG
Жыл бұрын
I guess the dealer should be able to reprogram used keys but they may want to upsell you a brand new one. I'd just say you ring up a dealer and ask. The tool will only program aftermarket BE benz keys so it won't do a genuine blank.
@chidichukwudi4223
Жыл бұрын
Can it program for all keys lost on same car?
@DIYAutoworksNG
Жыл бұрын
Yes, but disassembly will be required and wired connections made to the EIS.
@michaelhanna2104
Жыл бұрын
My man! Thank you
@DIYAutoworksNG
Жыл бұрын
You bet! No worries!
@GamingClans
Жыл бұрын
Thanks for the video mate,if I may ask ,is it possible to use a Xtool KC 100 to program that Mercedes key or not?
Пікірлер: 100