#coban # 303g #gpstracker
!! Here I bring you the step by step of how to configure 1 and 2 controls to the gps tracker coban 303G motorcycle alarm version, and teach you the functions of the remote control, what each button and the silence button are for.
to have these functions you must manage your phone number with the gps tracker 303g and the command to add is admin123456 space and the number, example: admin123456 3202941948
the gps responds with admin ok, you can add up to 5 numbers, but I do not recommend that you add many, since the balance of the simcard recharges increases, since each alert is sent to all the numbers.
here is the step by step of how to configure the controls: coban 303G:
If you have a remote control with your tracker at hand, you need to add another one, follow the steps below,
If you don't have the mermaid, please ignore the mermaid part.
1. For remote control of Program 2 GPS device, turn on the GPS and press the SOS (on the harness)
For 7 times continuously (it is for the red button on the harness, 7 times continue pressing need 4 seconds around)
And the siren beeps 2 times to enter the learning mode, press the (lock) button of the first remote control (the original one),
The siren will sound 1 time, then press the (unlock) button of the second remote control (the new one),
2 times means the programming is completed successfully, you can turn off the device after 5 seconds
If you don't have a remote control with your tracker at hand, you need to add the first one, follow the steps below,
If you don't have the mermaid, please ignore the mermaid part.
2. For remote control of the program 1 GPS device, turn on the GPS and press the SOS (on the harness) to
7 times continuously and 2 siren beeps to enter learning mode, press the button (lock), siren beep 1 time
Then press the (unlock) button and the siren beeps for 2 tims, which means to program it correctly.
Негізгі бет How to Program the remote control gps tracker 303G coban and teach them the mute function.
No video
Пікірлер: 323