Thank you for sharing us this informative ideas of how to propagate rubber plant from single leaf...I will try it also to our rubber plant and share it also to my KZitem channel soon. God bless and more power
@idriveaxj5670
3 ай бұрын
@@randychubbychubbz4811 I see this comment is 3y old, but you need a piece of the stem, a leaf will root but not grow a new plant.
@leonorsanchez4552
Жыл бұрын
Thanks for sharing i will try to my rubber plant!
@MrHouseplant
Жыл бұрын
Good luck! 😊
@amandastyles6062
14 күн бұрын
I have this clear cloud around the stem now as it’s sitting in the water, like maybe from the sap? But should I rinse it off or leave it?
@Vivere17
3 ай бұрын
Trying this tomorrow ❤wow
@nasimterrak4227
4 ай бұрын
How long you keep it inside water for? Thanks
@tyragarrett8506
Ай бұрын
How long did it take to grow roots
@artandcraftwithsimplicity5572
3 ай бұрын
Hey I have removed the white small roots thinking it's fungus 😢😢 will it grow again pls reply 😢😢
@andymujal6103
3 жыл бұрын
Very nice looking rubber tree 🎄👍👍👍
@MrHouseplant
3 жыл бұрын
Thanks 👍
@SuperLewisF1
4 жыл бұрын
Why did you cut off the one leaf on th side, I mean is it necessary? Can't we just keep with the all the leaf in th water ? Thanks
@Growgreen
9 ай бұрын
Yeah but it takes up to much moisture from the plant so he had to cut it, if it was a cutting with six leaves, he had to cut three or more Edit: also he needs a node, every bump that you see where a leaf has been is a node, an area that roots can come out of
@monagrin5778
Жыл бұрын
I have a big tree! can I get a cutting that’s the size of your plant from it?
@MrHouseplant
Жыл бұрын
Generally such large cuttings are difficult to root. What you can do is air layer it and once it grows roots, cut it and pot it separately. That is the best way to get a large cutting :)
@יונהאמיר-ז9נ
9 ай бұрын
Do you put something in the water to root?🙏🌹
@tracy062
Жыл бұрын
question at the place where it was cut, how is the direction of the stem now? upwards or sideways?
@MrHouseplant
11 ай бұрын
Hi, it stays upwards 😊
@unfortunatelyhuman5330
2 жыл бұрын
Was there only water in the container or it was mixed with plant hormones or rooting hormones!did you put those in the water?????🧐🧐
@MrHouseplant
2 жыл бұрын
Hi, there was nothing in the water, it was just plain water. If you want to add anything, I suggest oxygen, by using an air pump: www.mrhouseplant.com/recommends/air-pump-2/ And increasing the warmth by using a heat mat: www.mrhouseplant.com/recommends/heat-mat-2/
@unfortunatelyhuman5330
2 жыл бұрын
@@MrHouseplant Thank you very much. You replied to me is a very big thing. Thank you again
@MrHouseplant
2 жыл бұрын
@@unfortunatelyhuman5330 My pleasure :)
@aslammaroof4062
2 жыл бұрын
Very nice work 👌👏👏👏👏
@MrHouseplant
2 жыл бұрын
Thanks a lot Asiam 😊
@foliagecove355
4 жыл бұрын
Can I just use the leaft itself to propagate is or it must have a new leave still growing out of it?
@idriveaxj5670
3 ай бұрын
Must have a piece of the stem, although a leaf itself will root in water it will not grow another tree.
@nm6818
5 ай бұрын
We can't see where you cut because a leaf was blocking it. Can you verbally explain?
@samanthapavan9717
4 жыл бұрын
Você é muito bom
@hectorludivic9576
Жыл бұрын
Is it just plain water that is in the tube? Or did you put any solution with it?
@MrHouseplant
Жыл бұрын
Hi, it's just plain water. 😊
@slimebykat373
Жыл бұрын
Okay question I have one all my leaves are droopy. She’s a rescue. How do I fox this she gets lots of light. Even gave me a new leaf but even that is drooping
@MrHouseplant
Жыл бұрын
Can you send me a photo on Instagram or Facebook? I can't say much without a photo 🙂
@omarayad8553
3 ай бұрын
السؤال المهم هو : بعد قطع الورقه هل ستستمر النبته الأساسية بالنمو ام انها ستتوقف على هذا الحد ؟
@zeyadmohamed6911
2 ай бұрын
@@omarayad8553 طبعا هينمو
@mahamadasulthana6188
10 ай бұрын
How much time it took to got the roots
@mahi6778
4 жыл бұрын
nice information.....
@MrHouseplant
4 жыл бұрын
Thanks
@adamidris958
3 жыл бұрын
Hye Mr Plant. Sorry asking you something. I'm adam from Malaysia. I'm trying to propagate rubber plant using their leaf. I tried to sow the leaves using soil but failed. My question is whether the soil should always be moist or should it be watered daily or how to water it?
@MrHouseplant
3 жыл бұрын
You can't propagate a rubber tree only with a leaf. It will grow roots, but won't grow new leaves. You need a node.
@adamidris958
3 жыл бұрын
@@MrHouseplant tq bro
@raffysungarngar3684
4 жыл бұрын
So that is what my aunt used to displaybas house plant in her resort.
@dhanalaxmip7465
4 жыл бұрын
Make a video on soil it is so light 😊
@MrHouseplant
4 жыл бұрын
I do have a video on soil, on how I make my potting mix :) That's what it's called "How to make a potting mix" :)
@imeldateves5179
4 жыл бұрын
Hi, what kind of solution did you used to have that kind of roots? Thanks
@caridadvillamil9675
4 жыл бұрын
I will try this
@donkeyronald
Жыл бұрын
How many days before roots will come out?
@MrHouseplant
11 ай бұрын
Hi, the length of time it takes for the cutting to root will depend on many factors and will be different for everyone. For one person a cutting might root in a week. For someone else it might take 2-3 months. It depends on the amount of light, amount of oxygen in water, water temperature and other factors. As a general rule of thumb, leave the cutting in water until it grow 2-3 inches of roots. Then you can pot it in soil. 😊
@ssvps3742
10 ай бұрын
It is sand or soil ????
@sweetiepie28now
4 жыл бұрын
What type of soil have you used here? I bought rubber plant from amazon but it has very small leaves than what you have shown in the video...
@MrHouseplant
4 жыл бұрын
You probably bought a young plant. If you provide it with sufficient light, new leaves will grow bigger over time
@ChickenGun161
7 ай бұрын
I try but work!
@marusvlog7337
Күн бұрын
Only water?
@wanderrhea
4 жыл бұрын
What is your soil recipe?
@jabtakhumrahege5004
2 ай бұрын
इसे घर के अंदर रखे या बाहर
@strider6432
4 жыл бұрын
What will be the benefit of planting rubber tree because i use to plant vegetables most in container.
@yumika942
4 жыл бұрын
I have the same ficus as him and they apparently purify toxic substances from the air like carbon monoxide and formaldehyde (not that you would have that near you??) and they look cool
@strider6432
4 жыл бұрын
@@yumika942 rubber tree is just like other tree it purifies the air and releases oxygen in the atmosphere if that is your intention there are some small plants that can do this things rubber tree has a sap that is deadly and you like to put this inside your house. It doesn't mean that all plants are good
@MrHouseplant
4 жыл бұрын
Hopefully you will not eat the rubber tree :) It's there for decoration. Unless you eat it, you will be fine. The sap can be irritating to the skin, but you would have to cut or break off a piece of the tree. As long as it's in one piece, you will be fine. My family has had a rubber tree indoors for over 40 years.
@krandle2175
3 ай бұрын
When I propagated my tree I saw the sap and read it was latex- which I'm allergic to. I moved it outside and it is doing better although it started dropping the other day (I think over watered) I also noticed everywhere I cut that sap came out created a nod and new leaves are forming(: Wear gloves when handling.
@neorodan_
Жыл бұрын
How long does it take for it to grow?
@MrHouseplant
Жыл бұрын
They are not fast growers, usually 1 leaf every month or so, during the growing season :)
@resheydacles8455
Жыл бұрын
What kind of water do you used??
@MrHouseplant
Жыл бұрын
Hi, it's plain tap water 😊
@riyagupta03
4 жыл бұрын
What is the soil medium
@chloek.5076
4 жыл бұрын
What kind of soil are you using ? Thanks
@MrHouseplant
4 жыл бұрын
I get any commercial potting peat-moss based mix and amend it with perlite and bark :)
@imnotjohn
2 жыл бұрын
Do you get regrowth from the original spot you cut from?
@MrHouseplant
2 жыл бұрын
Hi John, yes, I get growth underneath the cut. That is the way to have the plant branch out actually, it's one way of making a plant bushier :)
@AdvRubala
3 жыл бұрын
How many days once water can be changed?
@swetasharma2924
4 жыл бұрын
What is white substance in soil?
@MrHouseplant
4 жыл бұрын
It's perlite :)
@ifeddiChu
Жыл бұрын
Would you help me please? Mine is getting yellow leaves 😢 why is that!
@MrHouseplant
Жыл бұрын
Hi Feddi, rubber tree leaves will start turning yellow if the plant is overwatered or if it's moved to a spot with less light. Only water once the soil is fully dry to the bottom of the pot. Use a chopstick to check the soil :)
@suhyeonandflowers.2419
4 жыл бұрын
Nice video~ new friend~🌸🥰
@MrHouseplant
4 жыл бұрын
Thank you 🤗
@plant-beauty-love1019
2 жыл бұрын
What is the composition of your potting soil?
@MrHouseplant
2 жыл бұрын
In general 1 or 2 parts potting soil, 1 part perlite, 1 part bark. I changed it, depends on the plant, depends on which pot I'll be using (terracotta, plastic, ceramic) and how much light the plant will be getting. I have a blog post on the topic of repotting that might be helpful: www.mrhouseplant.com/blog/how-to-repot-a-houseplant-properly/ And here is a video of how I make my potting mix: kzitem.info/news/bejne/mphom4N4pZOKgG0&ab_channel=Mr.Houseplant
@timothywang2121
4 жыл бұрын
Can I reroot a rubber plant from the same cutting? My rubber plant cutting that was rooted then planted grew 1 leaf. But after 6 months now no new leaf growth. I checked the roots and it seems like it has root rot. Can I just cut the roots then re root the upper part ?
@MrHouseplant
4 жыл бұрын
They can stop growing outside of the growing season, just because it didn't have any new growth, doesn't mean there is something wrong with it. I suggest you make sure it's root rot before taking it out of the soil and trying to reroot in water
@gurvindersinghbawasran3336
2 ай бұрын
Miti kon si hai yeh bhai
@Nikkinicole0587
Жыл бұрын
Can you keep your rubber tree in water
@MrHouseplant
Жыл бұрын
I've grown it for a few months, not longer than that. But you could try looking into hydroponics - add an air pump and nutrients and try :)
@Nikkinicole0587
Жыл бұрын
@@MrHouseplant okay what about semi hydroponics or leca?
@michaeloclarino
2 жыл бұрын
pwedi ba gawing bonsai ang rubber tree??
@deepalipimpale309
Жыл бұрын
Which is that solution in the testtube ?
@MrHouseplant
Жыл бұрын
Hi, it's just plain water. 😊
@deepalipimpale309
Жыл бұрын
@@MrHouseplant ok thanks
@geethasastry8394
4 жыл бұрын
I have a fairly good garden with different varieties of hibiscus, rose, jasmine ect. The plants are in good condition, but i expect more flowers, which is not blooming, i tried banana peels, dsp,, good manure also, but not getting expected result,, please suggest some remedy
@donutsimp9345
2 жыл бұрын
Use dried egg shell and make it powdered then pour it in your plants. Be careful not to inhale the powdered egg shell. For rose or other flower plant mix 1-2 small sachet of MSG in a pail of water that will makes ur flower plant always bloom.
@donutsimp9345
2 жыл бұрын
Cut into tiny pieces the banana peel, apple peel, and other left over veggies or the garlic peel onion peel then mix it with the soil. It will serve as an organic fertilizer.
@nikkimaru86
2 ай бұрын
Don’t you need to wait at least a day to callous over?
@dircedossimusialowski2049
4 жыл бұрын
Bom dia! Quero saber o que voce mistura na terra?
@noCRAPplz
2 жыл бұрын
I have a rubber tree near my home .
@princeprajapat2932
4 жыл бұрын
How much day
@putriduyung999
4 жыл бұрын
Pohon karet yah?
@leonardoputra5153
4 жыл бұрын
Iya betul
@الاستاذه-ل1ط
Жыл бұрын
متى نغير الماء
@MrHouseplant
Жыл бұрын
Hi, replace the water once a week, or more often if it gets dirty more often. We are replacing the water to remove harmful bacteria and provide oxygen for root development. You can also add an air pump that will provide a constant inflow of oxygen. This can cut propagation time in half and you won't need to change the water as frequently, only to refill it. The water level will go down over time because 1) the plant will use some of the water 2) part of the water will evaporate. So make sure to refill the dish regularly 😊
@Podcasthubreal
4 жыл бұрын
Please tell about the root hormone you use 😊😊😊
@MrHouseplant
4 жыл бұрын
I don't use a rooting hormone :)
@rosariomirasol9023
4 жыл бұрын
That is rubber plant?
@MrHouseplant
4 жыл бұрын
Yes, ficus elastica or commonly known as rubber tree :)
@k-l7b2i
4 жыл бұрын
😀😃👏👏👏👍
@movie8028
3 ай бұрын
मेरे घर पर रबर पौधा हे आज मेने आपका विडीयो देखा मे आपका विडियो देखिते अपने पौधे का कटींग करता हु मुझे पानी मे पौधा उगाना हे तो मे आपका विडीयो देखते मे पैधा पानी मे उगाता हु तो उसकी गेलेटी हे की ऐ पानी मे उगेगा मेरी बात का जवाब दो ओर रबर पौधे मे पानी मे उगाते हे तो मुरी ये कीसने दीन मे आते हे
@LayaCenter
Жыл бұрын
thank you?? But the cut was obscured and also your hand to see where you cut... soooooo
@MrHouseplant
11 ай бұрын
You can cut underneath the second or third node from the top. Make sure the bottom node or two are always under water. Provide bright light (over 5,000 lux) and replace water weekly. Using a heat mat and an air pump will significantly speed up propagation and increase chances of success 🙂
@hmsdemolition8588
4 жыл бұрын
Can you do one on marijuana?
@MrHouseplant
4 жыл бұрын
I would, but I don't have it. If I start growing it, yes, I'll definitely do a video :)
@hmsdemolition8588
4 жыл бұрын
@@MrHouseplant thank you
@babypanda365
4 жыл бұрын
How are you MR. Houseplant...? Why no upload new video..?
@chandramakers3922
3 ай бұрын
Sir it's not woz
@Cinderela24
4 жыл бұрын
Bom...
@sanjaykhatri9830
Жыл бұрын
it's not working
@MrHouseplant
11 ай бұрын
Even if you do everything right and provide the most optimal conditions, some cuttings will still rot. That’s just nature, we can’t control it :) We can only provide the best possible conditions and hope for the best. Now, there are a few things you can do to increase your chances of success: 1) Increasing the warmth of the propagation medium, regardless of whether it's soil or water, by using a heat mat. Increasing the temperature by a few degrees significantly speeds up propagation. 2) Increasing the amount of light, more light increases photosynthesis and root formation. Either move the cutting to a brighter window or use a grow light. Don’t keep cuttings a few feet away from a window, but right in front of it. And don’t place cuttings behind walls next to a window - but in front of the window 3) If you're water propagating, use an air pump to constantly provide fresh oxygen to the water. Roots use oxygen and release carbon dioxide. A constant influx of oxygen increases propagation speed. If you’re propagating in soil, mix the soil with perlite to increase macro pores and the amount of oxygen in it. Hope this helps :)
@carlbulosan585
3 жыл бұрын
Ano yung itim nasa garapon
@Yahawah144Elect
Жыл бұрын
This can’t be real!?!
@MrHouseplant
Жыл бұрын
It is, why would I make a video otherwise? 😊
@ศศินภาหนูมงคล
11 ай бұрын
กูไม่เก๊าตัดตรงไหน เอออออ
@yuvraj_22Vlogs
Ай бұрын
Fake
@jennlinzy7184
Жыл бұрын
Bull
@MrHouseplant
Жыл бұрын
I'm sorry you're not in a good place. I hope things get better
Пікірлер: 129