Nice to see how you deal with people’s feedback. I appreciate the way you correct your mistakes and all of us can take advantage and learn from that. Thank you man!👏👏👏
@SurfskateLove
3 жыл бұрын
Learning every day, my friend! Thank you!
@nateross14
2 жыл бұрын
Good video! Technically, when you put bearings in using the truck to press the bearing into the wheel, it is putting some side load onto the bearing because all the force is being pushed in the small inner bearing race which you don't want. The best way is to actually just use a wrench socket or bearing press thats the same diameter as the outer bearing ring, set it evenly on the bearing, and gently tap the socket with a hammer to press in the bearing. Doing it this way puts zero sideways load on the bearing and is always the recommended way by professionals. On a skateboard, as long as it's not taking a huge amount of force to press the bearing in the wheel, it's probably a not a big deal using the truck to press in the bearing, but using a socket on the outside race is just a good general habit to get into when pressing in any kind of bearing. Always avoid side loading the inner race if you can.
@enriquedurango5346
3 жыл бұрын
I saw that issue with the bearings too, but the video overall was really good, great content as usual! keep the videos coming!
@SurfskateLove
3 жыл бұрын
Thanks, Enrique! Much appreciated.
@MrFreezook
3 жыл бұрын
Thanks Steve for mentioning me 😃 appreciate it very much. All the best. Yeah I guess you pronounced it right. Nice follow up. 👍
@SurfskateLove
3 жыл бұрын
I appreciate your feedback! Very helpful. And we need all the surfskate content we can get -- especially from experts like you. Let me know how I can help you grow your channel.
@MrFreezook
3 жыл бұрын
@@SurfskateLove Thx again Steve :) Get in touch with me through Instagram. The link would probably be in one of my Videos' description box.
@spiderpunkfb
Жыл бұрын
This method also works for fingerboard wheels with bearings, that speed cream is magic!
@obsoletepaul
3 жыл бұрын
Great video! I will say that my Bronson G3's haven't been cleaned since I put them on months ago and they're still performing like new. I'll likely only do them every six months. Also, if speed cream isn't available, you can use sewing machine oil
@SurfskateLove
3 жыл бұрын
Yeah, I really don't think you need to do this a lot. I've even had guys say they never clean them, they just replace them.
@obsoletepaul
3 жыл бұрын
@@SurfskateLove in the UK Bronsons set me back £30. I will say that before I make the decision to rebuy, it's well worth me spending some time and likely very little money cleaning them. I've even heard that you can essentially make yourself a bearing cleaner bottle with a bottle, bolt, wing nut and a glue gun. As always, love your content. Best Surfskate channel around.
@aguadoia
3 жыл бұрын
Hey Steve. In my case, I use specific bearing grease (ceramic) which is the same one I use for my MTB. It's a bit thicker but It'll last longer and spread it self better as soon as you start rolling. It helps a lot if you ride in places where it rains more often and wheels tend to get grimmier faster. About the process, if your bearing has two rubber caps, one side is open, the other still has the white plastic support for the bearings, so it's pretty much the exact same process for both. Love your work!!!
@warrencogburn2198
Жыл бұрын
To install any bearings you should push at the friction side. That would be where the bearing race meets the wheel race. Anything inside of that you are putting pressure on the bearing assemble. This shouldn’t be much of a problem unless tolerances are tight.
@florencebrienne3125
3 жыл бұрын
merci from France !
@robsonrobson4999
3 жыл бұрын
Maybe just get built in bearings (like from Zealous or Tekton from Seismic). No more need for spacers or speed rings when installing! AND no need for spacers when cleaning! The ones from Biltin already come with a container with a screwable cap wherin the bearings are arranged on a bolt. So you also don' t need any special cleaning bottle any more - just use the container for cleaning. The Biltin bearings have metal shields though. I sometimes just dissassemble the bearing(s) that don' t run as smootly any more completely and clean them by hand.
@PargusAuriga
3 жыл бұрын
Top quality tips!
@SurfskateLove
3 жыл бұрын
Thanks, Joseph! Glad you found it helpful.
@LH-xv5cx
3 жыл бұрын
Hi -- I am new to surfskating. I have found your channel very interesting and very informative for a beginner. I have a question about the wheels on my YOW Huntington Meraki (S5) and my Smoothstar Holy Toledo, which I have not found any answer to so far. To begin with -- my expectation when I first got Smoothstar is that it should be faster. However, it required a little more efforts for me to pump when riding Smoothstar than YOW. I found YOW to be more pleasant and faster to get from Point A to Point B -- say 200 yards on the road. So, I decided to time the wheels, and the result was the YOW's wheels when spun (by hand) last much longer compared to those of Smoothstar. I realized that Smoothstar is designed for surf-training, and not for long cruising. But, from your other video I understand you said YOW with Meraki truck is not designed for long cruising either. At least I expect the wheels of both brands to be similar in performing. I believe you have both brands and will much appreciate if you can confirm this, or if it was just me lacking the basics to ride Smoothstar and in need for more practice (despite my riding YOW was smooth and effortless). And, I will much appreciate if you could also explain why YOW's spinning wheels last longer, please!! Many thanks in advance
@razgriz3238
Жыл бұрын
i use 2 DIY cleaners so i can re use the dirty alcohol or acetone (may buy the official cleaners in the future)
@tillkraatz624
3 жыл бұрын
Great video! im currently thinking of playing around with wheels! u got a video on wheels or any recommendations for brands?
@SurfskateLove
3 жыл бұрын
Hey Tom, I am currently testing a bunch of wheels in preparation for a wheel review. Give me about a month, I'd say. Thank you!
@tillkraatz624
3 жыл бұрын
@@SurfskateLove awesome, thnak u :)!
@mariolenta2178
3 жыл бұрын
Also don't forget to clean the inside of your wheels, they sometimes gunk up too. *Also you should be careful with your skatetool while tightening the wheels, the tool itself can press in the seal of the bearing. Look up something like bronsons bearing saver tool and you'll understand it, i messed up quite a few bearings until I realized it was the tool 😅🤙
@SurfskateLove
3 жыл бұрын
Thanks, Mario! Very much appreciate your insights and contributions.
@poingmaster
3 жыл бұрын
Greetings from Thailand! Do you have a suggestion for a loosen rear kingpin of my Slide Surfskate? Please give a guide to me for fixing this issue. Thank you ☺️
@anime123ful
3 жыл бұрын
Hey, i know it’s to much to ask but it would ve great if you review the Decathlon Oxelon Surfskate
@SurfskateLove
3 жыл бұрын
Not too much to ask at all! I’ve been waiting for them to be back in stock. And I finally got one! I’ll have a review out by next week.
@BomberOperator
3 жыл бұрын
l'm First.
@kesundersun
2 жыл бұрын
My hamboard is 45 minutes old, only 45 minutes of ride time and the wheels & bearings aren't functioning properly. Clicking on the front left and super slow on the back left....
@SurfskateLove
Жыл бұрын
Bummer! :(
@hilou-rc9jn
3 жыл бұрын
hi man ! I have this surfskate that has a spring inside the truck, the brand is "Slide" and I have no clue on how to clean and maintain it
@SurfskateLove
3 жыл бұрын
The Slide is very easy. I would start by just taking it apart carefully and analyzing all the parts.
@hilou-rc9jn
3 жыл бұрын
@@SurfskateLove I'll try my best cleaning it, thanks mate
Пікірлер: 34