I always use Invis on mine and my little boys bikes. Easy to apply. Super tough protection. Keeps the bikes like new, but you need patience when applying it wet.
@chrisridesbicycles
Жыл бұрын
I have used both, the ones you apply with water as shown and ones that are applied with a heat gun (Dyedbro) and found the second option easier to work with.
@kamikatze1738
Жыл бұрын
The degreaser from Muc-Off is realy agressive.I used it on my old bike and it actually removed some paint. I personaly only use soap or brake cleaner on my bike.
@armanrivera4116
Жыл бұрын
i use dirt and mud
@DaveMustaine.
Жыл бұрын
Merry Christmas, GMBN!
@rottieshepcalibre9156
Жыл бұрын
Much needed video. Thanks 😊
@Robert_512
Жыл бұрын
Love that Canyon!
@drmoynihan
Жыл бұрын
I used a 3M film that used a bit of alcohol and it worked quite good. Thank you for this (advertisement) tutorial and reminder that I want to do just a little more than the seller did on my beautiful Canyon. P.S. I bought the film as sheets and cut it up myself which I found more effective than precut pieces.
@Gidogeek
Жыл бұрын
I’ve used a combination of ceramic coating and xpel protection.
@justsayin3600
Жыл бұрын
Make sure you take care of that ceramic coating. It will haze up on you if you don't care for it like the manufacturer says. Then it's a pain in the arse if you want to remove it. It can stick so good to the paint it will ruin the paint trying to get it off. Especially if you try to buff it out.
@voltage80x
Жыл бұрын
I install ceramic coatings as a small business for years. I don’t have one on my mountain bike, would be useless. Better off using a spray sealant after every wash.
@lewis-t5476
Жыл бұрын
Just use invisi frame and get the hole bike covered 👍
@thim8009
Жыл бұрын
Helicopter tape. It doesn't look near as nice, but it does protect.
@paulj5975
Жыл бұрын
Baby oil?!?!? What are on about lol.
@razorsharp9850
Жыл бұрын
Those separate pieces don't make a lot of sense. Would been better to have a longer piece that can be cut.
@cityproofdad
Жыл бұрын
Its actualy soapy water no bb oil it will make no sense to degrease frame then apply oil it will literaly never stick if is oil on the sticky side
@ej1_drew
Жыл бұрын
i like seeing the paint. no protection on my bike :)
@mikedwiles
Жыл бұрын
I would like to find some opaque ones. My bike is mostly black with pink and I'd like to cover the pink without repainting the bike. So far, I've used black electrical tape. Maybe dark window tint? I wish I could find black.
@maxmalstift
Жыл бұрын
Black Vinyl
@davemathers8954
11 ай бұрын
can not recommend ride wrap. hard to install and doesn*t fit good.
@dominicmccarthy3100
11 ай бұрын
Hi... The paint scheme on my bike (trek roscoe 9) has raised spots all over it part of what attracted me to the bike. But do I now have an issue with frame protection..Will I be able to apply the protection to an un smooth frame? ... I'm guessing i wouldn't be able to avoid air bubbles.. Thanks in advance 😁
@wuffie87
Жыл бұрын
I feel silly with this comment, but is that protection sticker matte, or is it finished in the style of a known person named "Matt"? I wouldn't be surprised at either option given some naming conventions but I'm guessing it's just a typo.
@alejandromoreno5056
Жыл бұрын
coating? it's a bike meant for the hills, not a luxury car lol
@Rob_Champ
Жыл бұрын
🤘
@z33tanner
Жыл бұрын
So I learned disc brake cleaner is very different from brake clean cause she used it to clean the frame, must be paint safe
@bobothericefarmer1878
Жыл бұрын
Always need to protect ur buke
@aunehetle1108
Жыл бұрын
First
@BeardedPete
Жыл бұрын
First
@FIGHTTHECABLE
Жыл бұрын
Disagree. Ride that bloody bike and stop treating it like it's a road bike in a show room.
Пікірлер: 33