🔴Watch Next: *Stihl MS 271 Farm Boss Chainsaw | Why I Chose This Chainsaw* kzitem.info/news/bejne/lm6w0mGfZqSlY6A
@sbearly
2 жыл бұрын
Thanks for pointing out the direction of chain. Other videos about that seemed to take it for granted that a first time user would already know that.
@ErickThomas-xy7nc
3 ай бұрын
I recently bought a ms 180c and I had problem with chain. After watching your video I solved my problem. Thanks for your video.
@GettingItDoneRepairs
3 ай бұрын
Great!
@richardmercer6890
Жыл бұрын
Easy to follow video. Very well done and very informative.
@GettingItDoneRepairs
Жыл бұрын
Glad it was helpful!
@jaynearmstrong5740
2 жыл бұрын
Could not have done it without you... most important was the way you put it accross was easy to follow as have a different model xx
@boblangford81
6 ай бұрын
This is the first and only chainsaw I have used. I feel like I might have been spoiled by the super easy, and super quick chain tightening and replacement system.
@lalaJ109
Жыл бұрын
Thank you! As a first-time saw owner this is a big help.
@GettingItDoneRepairs
Жыл бұрын
You're welcome!
@darrellwendleton9697
6 ай бұрын
clear, concise and great information. Thank you very much.
@devoncsmith2696
Ай бұрын
Clear explainations. Thank you so much.
@GettingItDoneRepairs
Ай бұрын
You are welcome!
@karenbates4329
Жыл бұрын
Thanks I actually thought the chain flipped but I had it on backwards 😂 first timer here 😂😂😂 how fun❤
@moreensmith5006
Ай бұрын
Thanks for the video Just bought myself a Stihl! Can’t wait to use it.
@GettingItDoneRepairs
Ай бұрын
Good choice!
@patmartinez2489
2 жыл бұрын
Thank you so much! That is the exact model I have and you made it look so easy. I love my Stihl in fact I have two of the exact models. Two is one, one is none. If one is down, I have a spare. I am 75 and cut my own wood.
@robbiemorrow3473
2 ай бұрын
A much better video, I gave it a thumbs up anyway because you just seemed like you just want to help others! TY4SHARING 🙏
@GettingItDoneRepairs
2 ай бұрын
I appreciate that
@sagitario12ish
2 ай бұрын
Remember the first pull to start after hearing that sound put se selector to the next step and pull again, bingo start ! Is important the firs pulling sound if not pull again untill hear that sound. Esasy piece!
@ardalla535
3 ай бұрын
Both edges of the chain look like they could cut. But the correct cutting edge will be higher than the other. The chain rotates the way it does so that, if it breaks, it won't fly up into your face.
@robertbrandywine
Жыл бұрын
A trick I just learned today is to put a zip tie around the chain and bar after making it tight on the front, top, and bottom to keep things together. Then put the chain on the sprocket and sprocket cover back on.
@philliphall5198
9 ай бұрын
That’s how I keep my clean and sharpen chains on the bar and switch it all out
@kcevans1198
Жыл бұрын
Thank You!
@GettingItDoneRepairs
Жыл бұрын
You're welcome!
@charmantbeaugarcon8306
Жыл бұрын
Thanks for the good clear guidance. Cheers from a beginner in Australia 🤠
@GettingItDoneRepairs
Жыл бұрын
Very welcome!
@SantyLand7
Ай бұрын
Sir, your video was ok, but I suggest you speak a little about the brake mechanism.. Its purpose, when and how to engage it. Thankyou...
@NPartipilo
2 жыл бұрын
Great video. I start mine with the chain lock on for safety purposes. Thank you for your time..
@teoaitin3315
Жыл бұрын
Your video helped me to save my hard earned money..I almost killed my two chainsaws by installing the wrong direction. Thank you very much, Sir.
@GettingItDoneRepairs
Жыл бұрын
You're welcome 😊
@thedon8613
Жыл бұрын
Thankyou for baby stepping it for us I for 1 appreciate it!
@robertreis6177
Жыл бұрын
Excellent demo
@johndiaco7825
Жыл бұрын
Thank very much I appreciated the video
@GettingItDoneRepairs
Жыл бұрын
Thank you
@thompsontim1970
10 ай бұрын
Thanks for doing this video, I appreciate you
@Ellis1127
2 жыл бұрын
Great information
@GettingItDoneRepairs
2 жыл бұрын
Thanks!
@stevinwestcott976
Жыл бұрын
Told me everything I needed to know. Thanks!
@lakereed5767
11 ай бұрын
Nice video, BUT just saying the sharp part of the tooth is meaningless to first-timers. You should zoom in on the tooth and show the sharp part of the tooth has a point. That point is the first contact of the cutting edge. The non-cutting side of the tooth has a right angle straight side. Thx!
@carllehr4984
2 ай бұрын
😅😅
@HouseMastersTools
2 жыл бұрын
Good work 🍻
@GettingItDoneRepairs
2 жыл бұрын
Thank you!
@paulfriedman
Жыл бұрын
Very helpful thank you!
@GettingItDoneRepairs
Жыл бұрын
You're welcome!
@qtime314
2 жыл бұрын
I like to have my brake on when I start it lol
@kevinpierce731
2 жыл бұрын
much better video
@jeffn1002
8 ай бұрын
Better to just put bar on saw and then put chain on, hold bar up while tightening
@Randy-ul5hy
10 ай бұрын
Great video! I have the exact model chainsaw..its a work horse..especially over the past few months with the frequent hurricanes here. Just curious, what did you use to clean all that sawdust gunk etc.. off?
@Mojo32
9 ай бұрын
I use my air compressor blower nozzle, easy and quick. Before I had a compressor though I used shop towels and brake cleaner lol.
@bobmonger6142
4 ай бұрын
No close up of chain tooth? What's forward?
@philliphall5198
9 ай бұрын
I’ve seen some very dangerous people with chain saws and they don’t have a clue what they’re doing, stay away or just leave that area 😊
@stevewilliams3880
10 ай бұрын
Shouldn’t you start it with the brake stop on/ forward ( for safety?) then……. Release brake and warm up on idle
@GettingItDoneRepairs
10 ай бұрын
You can but I have experience, should be fine lol
@stevewilliams3880
10 ай бұрын
@@GettingItDoneRepairs Okay, whilst you may have the experience, there may be a few newcomers to chainsaw handling. I would therefore recommend “ brake on”
@robertstellato5172
Жыл бұрын
I have an MS181 CB-E easy start - I took the bar off to clean it and was surprised to see a wheel attached to the bar - it's held by a small bolt to the bar but is movable or rather swings up and down - because of this swing action, I'm having a hard time putting the cover on - what am I doing wrong?
@robertbrandywine
Жыл бұрын
I believe that wheel is the tensioner. You can turn it with the sprocket cover on or off. When it's off you rotate that wheel clockwise to loosen the tension: Check out this video starting at 6:44. kzitem.info/news/bejne/ubCY34h3nIiDa4Y
@StevieWilliams-uo8mq
11 ай бұрын
I got an ms18 with 16-inch chain what do I buy for it
@patmartinez2489
2 жыл бұрын
I just subscribed!
@GettingItDoneRepairs
2 жыл бұрын
Thank you 😊
@karenromero1703
Жыл бұрын
Need to zoom in on the teeth
@kokopeds8588
Жыл бұрын
brake on or off when starting ?
@GettingItDoneRepairs
Жыл бұрын
Some people say brake on for safety reasons of course. I have lots of experience with chainsaws and I'm very cautious. I don't normally use the brake. Do what you feel comfortable with
@andyjpaige
2 жыл бұрын
I know what you .Ean, I've put a chain on backwards lolol
@GettingItDoneRepairs
2 жыл бұрын
Lol you're not alone Andy. 😅🤣
@GettingItDoneRepairs
2 жыл бұрын
@ Andy
@nlei4749
Ай бұрын
That's not a 180
@felixds333
2 ай бұрын
You never showed a close up of the teeth. Yet you say the most important thing was getting the chain in the right direction.so..how does that look?? Would it have been too hard to bring the bar close to the camera lens?? Frustrating and dangerous video.
Пікірлер: 69