Would love a parts list with prices and a follow up video
@jasey3653
6 жыл бұрын
Stupendous video man! Most of this I already knew, but this just confirmed my suspicions. Thank you for showing your set up and providing this great info, would love to her start.
@thes197life8
6 жыл бұрын
this is badass!! love the blower on the 3v!
@waynemajors2270
2 жыл бұрын
thanks for putting this video out im planing on going with a supercharger i like how this one is made thanks
@Kaptkrispy
2 жыл бұрын
Way nice thank you for sharing. Nice to know it’s possible
@tajhrobinson1296
6 жыл бұрын
Good work my friend.
@whatsreallygoingon253
6 жыл бұрын
the 3 valve dont get enough love its a good engine
@ls4.8frank
5 жыл бұрын
I wouldn't say a good engine at all. It lacks on horsepower and torque and you spend twice as much as anything else to get up to 450RWHP which isn't easy unless you add a supercharger such as this with the intake kit. It is way overpriced for this intake kit, waaaaay overpriced! This kit if you have the supercharger and pulleys and such it should not be over $1,500. I like Mustangs, but the 4.6L 3v is notoriously a dog. Anything more than 450RWTQ and you run the high risk of breaking rods. And try rebuilding one of these engines... the rebuild forge internal kits are astronomical in price.
@billymattu
4 жыл бұрын
@@ls4.8frank so basically everything other than a 4v 4.6 and 5.0 coyote from ford was a dog in your eyes lol? The 3v 4.6 was more powerful than the 2v and the pushrod 5.0 when comparing stock form. And a 3v 4.6... 281cubes with a intercooled vortech kit puts out over 500whp... That's damn impressive for putting in 4-5k on an otherwise stock motor
@ls4.8frank
4 жыл бұрын
@@billymattu not impressive at all and it isn't $4-$5k guy, maybe you need to research a little better. Lmao. Sure you can make 500RWHP with a supercharger, but the stock internals won't last long and if you haven't replaced the timing in a while and end up installing a supercharger you can almost bet that it is going to scatter. I didn't say every other engine besides a 4v 4.6L or Coyote 5.0 was a dog, but damn man let's face the facts here. I love the Coyote platform especially the 2014 S197 Coyote and you can add simple bolt ons and achieve 500HP.
@billymattu
4 жыл бұрын
@@ls4.8frank just putting it out there, did a 3v 4.6 that's daily driven, vortech kit for 5500 after it was said and done, 480 to the wheels and that car ran like that for 4 years before it was sold. No issues. Sure the coyote platform is better but obviously it should be!
@rmartin5285
3 жыл бұрын
LS4.8Frank, obviously a Chevy guy. Why come on here bashing the 3V. Not everyone can afford a 5.0. Unless you track-race constantly, or like to replace tires, 450rwhp is plenty. Why isn't your name ZO6Frank or LS7Frank......both better engines than the truck 4.8 boat anchor. I'd actually be embarassed to have a handle that has the lowest of the low LS motor in it.
@jorg1456
3 жыл бұрын
Department of Boost 💨 wicked name
@jonathanlee8588
6 жыл бұрын
I'm also running a GT450 kit on my 07. if you haven't already, you should throw a Denso alternator on there. Jason is now producing them premodified with 6 or 8 rib pulleys and they're 165A new units.
@justinbarber9597
6 жыл бұрын
Jonathan Lee I have some questions about this if you could contact me at 870-805-1766 thank you
@jeffsmith6371
6 жыл бұрын
how did you tune and what kind of power does it make? please do a follow up on the car.
@BradleyMcCartney
3 жыл бұрын
This was an excellent video! Very informative. What are the other supporting mods necessary to instal this intake manifold/ supercharger? I am fixing to piece together my own supercharger kit, and I’m curious in terms of what other parts need to be sourced to make this kit work. If anyone could link me to some resources on what is needed to piece a kit I’d appreciate it!
@FullThrottleGarage69
3 жыл бұрын
Good video sir
@AGBULLIT
6 жыл бұрын
I am interested in a kit like this.
@diegoalexandro4508
3 жыл бұрын
Amigo gracias oor tus videos saludos desde monterrey mexico quisiera poner un super cargador ami mustang 2005 4.6 3 valvulas que me recomiendas mas economico
@Logan45499
6 жыл бұрын
What pulleys did you end up using for the 7 ribs?
@lukenelson8687
Жыл бұрын
So did it just have gt500 parts and you still need the supercharger or does it come with manifold and all of the parts with a supercharger included?
@joseortega324
3 жыл бұрын
Will the gt500 blower fit a 1999 ford f150 4.6L V8?
@Mustangrocket98
4 жыл бұрын
Nice supercharger kit i have 98 gt and all i have done to it was exhaust and few other mods but i stop spending money on my 2valve im saving to get gt500 swap 5.4l
@midnight347
2 жыл бұрын
Smart man the gt500 motor is a power house and not it don't have to be a 13 or 14 the 5.4 is badass too I actually prefer it. I got an 07 gt500 550 rwhp with minor mods aint even fbo and the blower is completely stock lol. Coyotes can make good power with a power adder but it's easier and cheaper to make big power with a gt500 since they're already supercharged you just gotta blower swap the head unit instead of having to get a full kit like with a coyote and the gt500 motor is strong it was made for boost and it sounds better than the coyote. They also have way better torque than a coyote I love the shelby motors.
@brucebigbie1537
5 жыл бұрын
How’s the supercharged mustang running?
@theservanify
5 жыл бұрын
So How much is the Intake i have everything else all ready
@jose3v507
3 жыл бұрын
What all did you have to fab or change yourself if you had to at All?
@traynice9633
Жыл бұрын
Hey, would that supercharger fit on a 2010 gt. I got a sport trac an a good deal on a 500 supercharger. Any feed back will be good...
@marcozr3138
6 жыл бұрын
Can it be done for the new 5.0
@JonsDailyHustle
5 жыл бұрын
Very nice video. Did you have to do anything to the internals of the engine before installing the supercharger???
@stephenhood2948
2 жыл бұрын
You can and should, but dont have to. Some bolt on stuff will certainly help though, exhaust, high flow injectors, cold air intake would also help a lot, but the only thing I can imagine is a must is a new tune.
@midnight347
Жыл бұрын
You need to make sure you have adequate fueling and the more supporting mods you have the better i.e. headers exhaust cams etc. You can make more power on less boost with less stress on the engine. Don't run more maybe 10 psi or so on 93.
@ok.chriss
Жыл бұрын
so the question is can i put a 2007 shelby gt500 supercharger on my 2007 mustang gt ? and what else do i need to make this project work? i have someone selling there supercharger off there shelby that im trying to get my hands on! please respond!! and let me know.
@locospeed01
2 жыл бұрын
Wonder if I can make this work on my F-150
@davidred3519
6 жыл бұрын
How much was it all in total? What kind of HP did you get out of it? I’m curious.
@alexortner2982
5 жыл бұрын
Around $3500 more or less. Makes 450 rear wheel horse power with the GT500 parts goes up from there.
@eddiecruz2613
5 жыл бұрын
Yep start it next time
@paulphillips1075
Жыл бұрын
Can’t you just get an oem gt500 intake manifold and then some adapter plates?
@siwash99
6 жыл бұрын
Albert! Cool build!! any updates?
@blkmrk
11 ай бұрын
Will this work on a 4.6 2valve?
@dssd245
11 ай бұрын
do they sell just the kit components. I see the used gt500 supercharger going for 800-1100$. can I buy just the kit from this company?
@elcallezjuaritozthugs6563
10 ай бұрын
you ever get her running ????
@GTcruzin
4 жыл бұрын
Link to the manifold makers website? Contact info please?
@gabep7360
6 жыл бұрын
could have at least started it. lol
@Bendejo6517
5 жыл бұрын
I wanna see it run and on a dunk
@berkeley5104
Жыл бұрын
Does this car pass smog serious question
@Pitman556
6 ай бұрын
Can this work on a 4.6 3v f150?
@bonxz125
2 ай бұрын
Could you do the same to a 2009?
@dennisbryan7522
5 ай бұрын
How much did that supercharger cost you
@ryanphinney438
5 жыл бұрын
Does anybody know the total cost and hp gains?
@alexortner2982
5 жыл бұрын
If you find most of the parts yourself you can do it for $3500 or even less.
@israelcabrera4358
3 жыл бұрын
I know this kit is for a 05 and up gt500 stock supercharger. But for example if I wanted a 2.9 whipple or a 2.6 vmp for a 07 shelby gt500 . Will that supercharger fit my 3v mustang with this kit.
@midnight347
2 жыл бұрын
Yes if it allows you to run stock gt500 blower you can run those blowers as well. However if you have stock internals this blower is more than enough. I wouldn't bother with anything better unless you have a built motor.
@israelcabrera4358
2 жыл бұрын
@@midnight347 thank you!
@vortecturbo
2 жыл бұрын
Yep
@BuzzKiller20
6 жыл бұрын
Does it clear your stock hood??
@toolmoto5445
6 жыл бұрын
The Next Best Thing Yes, it does clear the stock hood.. Thanks for watching.
@alexortner2982
5 жыл бұрын
yes
@YoBoyNero
6 жыл бұрын
Real question is lol..... *Will it drift*
@larryh3658
4 жыл бұрын
Come on man like others said we need parts list and some numbers.... Supposing you needed a tune as well. Then according to Brenspeed the stock internals won't handle too much over 450 TQ
@TreySoSuave
4 жыл бұрын
Larry H most i seen people go with TQ IS 470.. other than that your pushing it forreals
@midnight347
Жыл бұрын
This kit is easily capable of 450 rwhp on a stock engine. If you have other supporting mods you can make more safely. I.e. cams and headers and you're at 500 wheel and you can keep torque around that 450 mark. It can be pushed further with a built motor. I'd say 600+ is possible with a ported m122 and built motor and cams headers etc if you're on e85. This is a good blower for a stock motor 3v.
@TheTech9
19 күн бұрын
750 for the manifold?? If only! It's 3000 now
@zanehopefz6hundred761
4 жыл бұрын
Why no start up!? Wtf!
@jdogncars4819
3 жыл бұрын
Ford lighten 5.4 2 valve will go on a 4.6 2 valve
@vortecturbo
2 жыл бұрын
Nope the 5.4 has a taller deck so the distance between the bolt holes left to right would be wider.
@warrenleaksleaks7045
Жыл бұрын
i like to get the email to the company for my 3v.
@otislopez33
6 жыл бұрын
hp ??? u getting
@jamesdewiel4736
Жыл бұрын
I wanted to here it run👮♀️
@marcozr3138
5 жыл бұрын
Yea i checked for a coyoty its like 4300 bucks not worth spend a 1000 more and get an edelbrock supercharger there not giving these kits away
@1991tommygun
4 жыл бұрын
The manifold and intercooler has better cooling than edelbrock and you can put a tvs on it and make way more hp than most kits
@midnight347
2 жыл бұрын
Edlebrock sucks ass lol. You can get this kit 2 grand plus 4500 for a vmp gen3r and be 6500 all in and be able to fit a gen3r which is a superior blower into a superior lower manifold for not much more
@marcozr3138
2 жыл бұрын
@@midnight347 i have a gen3r is it as good as a whipple there so expensive what about the edelbrock 2650 heard good things
@marcozr3138
2 жыл бұрын
Whats your favorite supercharger
@midnight347
Жыл бұрын
@@marcozr3138 imo the gen3r is the best blower for a street car. I have one on my 07 gt500. I'm at 750 or so to the wheels on 20 psi with stock log exhaust manifolds and a twin 69 tbody and stock cams etc and I'm on 93/boostane (100 octane). Torque is round 700 it's a monster. The Eddie 2650 you refer to has the same rotor pack but vmp/Magnusons case with the gen3r is superior and will make more power. The higher the boost level the more pronounced gains will be. Nothing wrong with the edlebrock 2650 but the gen3r uses the same rotor pack in a better case so that is the one to get imo. It's more than enough power for any stock engine weather it's terminator, gt500 or coyote and is capable of 1000+ rwhp on built motors. It has awesome torque and fits under stock hood. Powerband is awesome what's not to love? Lol
@peterm3159
6 жыл бұрын
2500 for a manifold??? Than the blower and anything else. What's the point? Buy one made for your 4.6 3v at that price point or a fuckin bolt on turbo kit for 3g total!
@1991tommygun
4 жыл бұрын
A blower kit for a 3v is like 10 grand
@GorillaCookies
4 жыл бұрын
@@1991tommygun incorrect. There are multiple options to supercharge the 3v for under 4 k and even more under 5 k.
@1991tommygun
4 жыл бұрын
Gorilla Cookies ya, shitty non intercooled kits haha
@midnight347
2 жыл бұрын
@@GorillaCookies you can do this around 3500 total and that is plenty of blower for a stock 3v motor. It would work really well with this blower great power curve. The power curve overall is something that is often overlooked in favor of just peak power. That is only one part of the story. How the power comes on and the shape of the power curve is even more important for a street car than max peak hp.
@midnight347
2 жыл бұрын
@@GorillaCookies those are tuner kits that are non intercooler this manifold has badass cooling and a built in intercooler the manifold works better than any of the aftermarket stuff and the stock gt500 manifold isn't even as good. It's worth what it costs. Opens the door for all the gt500 blower upgrades too which are way better than the 3v options
@Mechanic83
6 жыл бұрын
To much talking and not really much useful information 🤔 title says how to install ??
@GorillaCookies
4 жыл бұрын
Not a good deal at all. The dollar cost per hp for that set up is absurd.
@1991tommygun
4 жыл бұрын
Its way cheaper than a whipple kennebell or procharger, and you can max out the 3v engine on it.....and if you build the 3v you can put a tvs on it and make 700 if you want, ur a moron if you think its a bad deal
@GorillaCookies
4 жыл бұрын
@@1991tommygun I appreciate you calling me a moron . It speaks volumes about your communication skills and lack of intellect. There are multiple options for supercharging the 3v for under 4k with 3v specific kits . Even more for under 5k . So maybe u should do a bit of homework prior to commenting
@craigc9181
4 жыл бұрын
1991tommygun l
@joshkeasler512
2 жыл бұрын
Well, when you start with a 4.6 what do you expect. Cost is high power is low.
@midnight347
2 жыл бұрын
@@joshkeasler512 but the car itself costs a significant amount less than a newer coyote car or gt500 so it's all relative. 450 rwhp 3v with this blower would be plenty of fun and you always have the option of upgrading to better options that were originally intended to fit the gt500 like the vmp blowers and whipple etc if you ever build the bottom end.
@tomparry4313
5 жыл бұрын
3V's have pathetic size cams! Even for a blower they need at least cams as big as the 2V.
@djyoyo169
4 жыл бұрын
Need diferent recording camera because this one is suck
Пікірлер: 126