#centering #wood #diy
Bit holder link:
• Come fare un porta ins... C Dear guys, today I show you how to install the allen capsules for wood with a socket, cross, flat or without attachment. In fact, the precision required by my Oneida bow required me to create a tool capable of inserting the compasses perfectly at 90 degrees and at the right height. The mechanism is absolutely safe, in fact, even by resting the tip of the drill, it continues to turn, while remaining still at the desired height. To install the bushes it is necessary to make two holes of different diameters. The first will be the guide for the second. The second bit, the one required for the installation of the compass, must have a diameter of about two millimeters greater than that of the bolt that slips into the compass (in my case 4-bolt and 6-mm bit). For the installation of the compass or simply to create the thread you can use the bit holder of my creation. Good vision
BALL BEARINGS: amzn.to/3nfNw6V
HEXAGONAL SLEEVE: amzn.to/3oMVHI5
DRILL STANLEY: amzn.to/36QAarQ
VERTICAL HOLES GUIDE: amzn.to/37egRZH
GLUE ROLL: amzn.to/2VQKda4
D3 VINYL GLUE: amzn.to/36QAnLO
TWO-COMPONENT GLUE: amzn.to/3qChF2j
Follow me also on:
Facebook
link: / mac-strange-4924738478...
Instagram
link: instagram.com/mac_strange...
Негізгі бет Тәжірибелік нұсқаулар және стиль How to put allen bushing on wood with the diy centering device
Пікірлер: 34