Top tip for you. I have a massive collection of 2 piece hockey stick/shafts. Wether its the top of shaft or bottom, wrap it in hockey tape near the opening, about 3 widths high. As for the handle or blade, same, use the hockey tape, wrap the extension or blade about 3 widths high. So when the 2 objects meet together & it forms the messy glue on TOP of the hockey tape you wrapped. Once the glue dries, remove the tapes and you will have ZERO glue mess on either shaft, blade, & extension. The dried glue will be on top of the tape not on your beautiful stick,blade or handle💪🏻👍🏻
@lpb3731
7 ай бұрын
What do you mean “3 widths high” ? English second language. Thanks !
@EstonianBerserker
7 ай бұрын
@@lpb3731 meaning the width of whatever hockey tape you use, wrap down 3 steps or more. It s all personal preference, especially if you’re really sloppy with glue, then I would tape the shaft pretty good so you don’t have to clean the glue off the shaft, it’ll be on the tape. And then peel the tape off and trash it.
@lpb3731
7 ай бұрын
@@EstonianBerserker got it ! Thanks for the great advice and fast reply ! Greetings from France
@KitKat-dl8qw
Ай бұрын
Hi. I have a warrior QRE10 stick and a ccm trigger 4 stick. Will a true 4-6” stick extension work? Will the Extensions be tapered or standard? Hope you can help 😎
@HockeyStationUK
Ай бұрын
@@KitKat-dl8qw the extension is standard. We find the True Extensions fits in pretty most most shafts that we have put in so far!
@jaxsonfb
9 ай бұрын
@HockeyStation do you know if a bauer stick extention fits into a true hockey stick
@spagmon
7 ай бұрын
I have a warrior supernovium sr, it’s 60 inches should i buy the warrior stick extension, or is there a specific one
@HockeyStationUK
7 ай бұрын
A warrior one would 100% fit in it but also if you can’t get one of those then a Bauer one would slot in nicely too!
@ossianericson4810
Ай бұрын
Should I put a Bauer nexus int extencion or a jr in the Ccm ft7 PRO stick 50flex
@HockeyStationUK
Ай бұрын
@@ossianericson4810 we would recommend the Bauer nexus intermediate / junior 50 flex extension /-)
@ossianericson4810
Ай бұрын
@@HockeyStationUK thank you so much
@tomb.9258
5 ай бұрын
The composite extension do cost quite a bit more like $6 for the wooden compared to $35 for the composite.
@HockeyStationUK
4 ай бұрын
In the Uk the price gap between the two isn't that much :) You can get a composite extension less than $20
@alishaharper9802
4 ай бұрын
What composite extensions would fit an intermediate ribcore tigger 7? And will a hairdryer work to fit as I dont have acsess to a heat gun 🤣
@HockeyStationUK
4 ай бұрын
Thanks for the question. You maybe there for quite a while if you were to use a hair dryer, definitely go to your local hockey store if you have one and I'm sure they would put one in for you, it doesn't take long. We find either A&R Int Wooden Extension, Bauer Senior Vapor Extension, Warrior Senior Extension or a True Senior Extension would work with it.
@sebastianberger8231
Ай бұрын
I m not sure if i need a 6 inch extention or a 8 inch extention? I'm 1.85m and using a 65 flex. Maybe you can help me?
@HockeyStationUK
Ай бұрын
@@sebastianberger8231 is it a 65 intermediate or a 65 senior stick?
@sebastianberger8231
Ай бұрын
Intermediate
@HockeyStationUK
Ай бұрын
@@sebastianberger8231 Depending on what length you would want your stick an 8" extension maybe a little better for you. But remember by adding on an 8" (Without cutting the extension) to a 65 flex will make the stick pretty whippy depending on your level and strength going through the stick!
@taetrocool6847
11 ай бұрын
Hi! I’m not sure so i prefer ask I have a intermediate Bauer vapor 65flex stick and I’m not sure if I’m supposed to use a vapor jr or a senior extension, or a Bauer nexus intermediate/junior50 extension? Thx!
@HockeyStationUK
11 ай бұрын
We would recommend to use a senior extension ✌️
@taetrocool6847
11 ай бұрын
@@HockeyStationUK OK👌🏽 Thanks you very much for that really quick response !!
@WELSH128
10 ай бұрын
jrjust had to extendd my bauer suprime intermediate tonight and the jr nexus carbon extention was perfect@@taetrocool6847
@ryanramos5500
3 ай бұрын
What kind of glue is used for the extensions? My stick broke but want to put the extension in my new stick. I imagine I’ll need more glue…
@HockeyStationUK
3 ай бұрын
@@ryanramos5500 if you search glue stick for heat gun then that would work. Doesn’t matter on brand :-)
@IDropDaBoom
9 ай бұрын
Wait so will a flat head screwdriver work to remove the plug thing in the stick
@HockeyStationUK
9 ай бұрын
Yes it will, the end plug will come out pretty easy with a flat head ✌️
@mqwrz
9 ай бұрын
Obviously 😑
@janzkee
9 күн бұрын
you can just rip it out with your fingers, it even pops out during play if its not taped
@JDAMC
10 ай бұрын
Hey what brand extensions would fit a ribcor trigger 3d. Would kt have to be a ccm one?
@HockeyStationUK
10 ай бұрын
Can you confirm what size/flex the stick is? Plus has it been cut down?
@fate7045
10 ай бұрын
I use a ccm stick and use the Bauer extender and it fits fine
@GraysonHawkins-j8g
11 ай бұрын
The glue is already on the stick extension correct?
@HockeyStationUK
11 ай бұрын
Yeah many extensions already come with glue, can confirm Bauer, True, A&R, Warrior and Howies Stick extensions come with a good amount of glue 😃
@itsbladessy6256
6 ай бұрын
Hi does a Bauer extension fit in a ccm ft ghost 70 flex senior
@HockeyStationUK
5 ай бұрын
Great question, it depends on which Bauer extension you have…but it might not sit flush in the shaft as slightly different shaft shape. If that’s all you have then you could always use a little tape on the extension that is going into the shaft. If you need anymore help give us a shout.
@itsbladessy6256
5 ай бұрын
@@HockeyStationUK so which Bauer one do you think would fit the best
@isobaric
Жыл бұрын
Will a hairdryer do the job?
@phgu
10 ай бұрын
No, just tried with a hairdryer, the glue didn't melt.
@rabbitofdeth
Ай бұрын
@@phguthis is false. I’ve only done this with hair dryers. It just takes more time.
@janzkee
9 күн бұрын
@@phgu put your finger over the backend of the dryer and only heat up the extension then mash the extension into the stick, let cool and it sits perfectly.
@matzesauerwein2183
9 ай бұрын
If i messed up, can I do it again with a glue gun?
Пікірлер: 44