Have my videos have helped you? why not support the channel in some way You can make a one off/ monthy donation here in only one click: www.buymeacoffee.com/MyRetroWatches If you would like to purchase any tools & equipment then please see my Amazon affiliate & eBay (I do earn a small commission from any sales.) Thank you. Link: Link: myretrowatches.co.uk/tool-sale-links/ If you would like to buy any of my T-Shirts then please look here: teespring.com/stores/my-retro-watches
@andreastevenson2173
5 жыл бұрын
Fantastic budget solution to luming. I have a vintage 1959 Gold Hamilton Sea Scape 17j the lume fell out of the hands when cleaning. I will be using my new found skills on this beauty first, then....... Top video thanks
@MyRetroWatches
5 жыл бұрын
Happy to have helped. Good luck.
@tunokies
6 жыл бұрын
Something I want to have a go at doing. Thanks.
@MyRetroWatches
6 жыл бұрын
tunokies your welcome. I hope this helps. Consistency within the lume mix is the key part .
@JonTheComputerDoctor
5 жыл бұрын
Brilliant video and I watched it all the way through just like all your other vids.
@MyRetroWatches
5 жыл бұрын
Thank you so much Jon
@SuccessShared
3 жыл бұрын
Very informative thank you especially as I haven't attempted this before - or even taken a watch apart to get to the hands first! Another video on this part would be useful? I also want to change a second hand from red to silver with lumed tip. Any tips would be gratefully received!
@Relumer
4 жыл бұрын
Thanks for sharing, I enjoyed to watch it. One little suggestion; after apllying the lume, let it cure and than apply a second layer of white paint, this will improve the look of the lume and also the glow performance. cheers from Spain.
@MyRetroWatches
4 жыл бұрын
Thanks, you put paint over the lume? does that not make it less visible?
@Relumer
4 жыл бұрын
@@MyRetroWatches sorry, I explained it wrong, you have to put the white paint after aplying the lume, below the applied lume.
@MyRetroWatches
4 жыл бұрын
Relumer yes sorry , I also thought I was commenting on my dial Lume video I did recently and not the hand lume !
@Gary-Seven-and-Isis-in-1968
4 жыл бұрын
Hello again Mike. This made me realise that I need not buy new hands whenever my Vostok hands are rusting and the lume falls out. So I think I might just try this remedy out and see what happens. Just one question, what actually is that Humbrol clear binder? Is it water soluble or something that is spirit based and evaporates quickly ? I would have thought that acrylic stuff would probably wash off with water and runs the risk of shrinking and cracking as it dries. Yours did not, which leaves me wondering is it similar to clear nail varnish ? My reason for asking is simple.. Humbrol is at least £7.50 for 28ml and will begin to deteriorate once opened. Whereas clear lacquer nail varnish starts at £1.39 and who cares if it goes hard by the time you next want to use it.
@a1topdog
6 жыл бұрын
Another great, informative video. Keep 'em coming 👍
@MyRetroWatches
6 жыл бұрын
Thank you kindly.
@DJChrisArgueta
3 жыл бұрын
Great job. Liked and subscribed. Cheers from Los Angeles.
@MyRetroWatches
3 жыл бұрын
Thank you very much!
@stephenbaker4950
2 жыл бұрын
Very good
@qusaymanchesterunited8004
2 жыл бұрын
Great 😊 could you tell me why you use matt varnish instead of glossy!?
@brixtondazo541
3 жыл бұрын
Hi!! New subscriber here in the phillppines.
@MyRetroWatches
3 жыл бұрын
Thanks for subbing!
@aaronwatch3214
4 жыл бұрын
Thanks.
@lee-jaynewman503
3 жыл бұрын
sweet info cheerz for you're time and vid.
@greggusan
3 жыл бұрын
Great vid, would love to try this. But want a bit of a creamy patinated look. Would I need a different powder (if so, do you know which one?), or do I add something to the powder or the binder? Thanks
@MikeBarnesOo
6 жыл бұрын
Cheers Michael, another cracking video. Any tips for dial hour marker lume removing/applying?
@MyRetroWatches
6 жыл бұрын
only real tip is steady hands. same process. carefully remove old lume, I have used a microscope for this. re-apply with an oiler. I practised making small drops first, to figure out the constancy is right and then to size the droplet of lume. joy is if you get it wrong you can just clean off and try again.
@rbmwiv
3 жыл бұрын
Thanks for sharing your knowledge. I am going to be trying this soon. Any alternative binder? Thanks again!
@MyRetroWatches
3 жыл бұрын
not sure just something that is clear and sets. guess even clear nail polish.
@rbmwiv
3 жыл бұрын
@@MyRetroWatches thanks so much for that. Your channel is great.
@morganjeffreymorgan
2 жыл бұрын
Is it viable to add lumen to a watch that never had it? Or would the added weight throw the timing off?
@MyRetroWatches
2 жыл бұрын
Difficult to say. If on the hands possibly. Not something I’ve ever contemplated.
@ivancapuz9471
5 жыл бұрын
Is luminous deteriorate overtime? My seiko watch lume become dark. I don't know why. Btw, is there different kinds of lume or all of them are the same?
@MyRetroWatches
5 жыл бұрын
Ivan Capuz hello. Yes lume loses its power over the years. There are many types of lume powder and the most expensive would be Bergeon especially made for watches. In my opinion it’s just finer powder really. You would pay a much higher price for it. What I use is very affordable especially if you want to try to do it yourself and it works really well.
@maisondusavoir3600
2 жыл бұрын
Sir my seiko 5 watch radium paint is getting removed form watch needle in form of flakes....
@MyRetroWatches
2 жыл бұрын
Seiko 5 should not be Radium
@maisondusavoir3600
2 жыл бұрын
@@MyRetroWatches well then its a luminous susbstance inside watch needle which has started to flake off
@dropj3
3 жыл бұрын
Thanks a lot! Do you think the binder works with paint/coffee, I order to make the hands not glow like new lume? Ps; new sub :)
@MyRetroWatches
3 жыл бұрын
to age the lume that method will work.
@lwsrider
3 жыл бұрын
How long does the paint glow?
@ugurylmaz7666
5 жыл бұрын
👍👍
@MyRetroWatches
5 жыл бұрын
Thanks
@pommespanzer1041
3 жыл бұрын
what do you do with really old hands which have been lumed probably with radium?
@MyRetroWatches
3 жыл бұрын
Leave them well alone . if you are going to remove then wear a mask and gloves. scratch it off into a plastic sealable bag I have only done it once and I was not sure if it was radium or not. Last thing you want is it in your lungs.
@panchoskywalker
5 жыл бұрын
What would you use as non glowing lume to restore hands to match an old non luming dial?
@MyRetroWatches
5 жыл бұрын
Sorry I have no idea. Lume is luminous! Didn’t know there was any non luminous compound on watches.
@guandasin3099
5 жыл бұрын
Whats the general name of the binder? cause i cant find one locally Can I use a Top Coat for the mixture?
@vincenzostr4488
3 жыл бұрын
Bergeon lume
@ZacVaper
4 жыл бұрын
You may not be concerned about your own health but you should warn the viewers that vintage watches could contain Radium (1960 circa and older). You wouldn't want them coping you and the way you blow that old lume airborne. Even tho the hands don't glow anymore, it's still radioactive.
@foxmulder3980
3 жыл бұрын
Why are there so many pusstards in this world scared about everything? You strike me as someone that wears your CV19 mask in your car as you drive alone....
@TruthLivesNow
3 жыл бұрын
The warning by the EPA is not to take apart antiques that contain radium, since the radium in an airborne manner could be bad for you. Seems like a wise idea we wear that Covid mask when we scrape that old junk off?
@TruthLivesNow
3 жыл бұрын
@@foxmulder3980 Fox, this here pusstard lives in California, works in Costco and soon to work in Home Depot locations. I am taking the Luciferian, Witches Brew, Mark of the Beast, Moderna Vaccine tomorrow to become Human 2.0...LOL! I am a Christian, yet my Christian friends in other States use illegal medicine to stop Covid, and refuse to take the Vaccines that are legal.
@foxmulder3980
3 жыл бұрын
@@cmdr4589 Nope, only killed the dumb chicks that put the paint brushes in their mouths, quit spreading fake propaganda loser...
@jmansoto2324
3 жыл бұрын
What is that liquid that you use to dissolve the powder?
@MyRetroWatches
3 жыл бұрын
its a matt varnish. you use it to bind the powder so you can spread and then it will set and dry.
@dodgydruid
5 жыл бұрын
I got a massive and pleasant surprise in applying my little UV lamp to my quite old Sekonda Safari, not only were the hands shining a brilliant 10 min long glow but the numbers too are fully lumed lasting just as long, had this thing years and never thought to check it. Another Sekonda, a humble gold tone older mens quartz has a fully lumed dial and again this stayed lit for more than 5 mins so been finding out which ones do have working lume and which don't, seems the older Sekonda's have quite a strong lume than the newer ones. How do you do the lume dots on such as Amphibia's which have notoriously weak lumes esp the post Soviet ones?
@MyRetroWatches
4 жыл бұрын
Hi Ian, I know nothing of lume on Soviet watches or what they used. pre 1960 you could be still talking about radium which was radioactive!
@watchmedraw4340
4 жыл бұрын
I need to buy myself some Oilers. Where would I buy them. Cousins lol
@MyRetroWatches
4 жыл бұрын
I have links to tools here on my site www.myretrowatches.co.uk/tool-sale-links/ thanks
Пікірлер: 58