About a bonus tip, we do the undersuit expanding procedure before begin a dive. Close a dump valve on a dry suit, inflate it, lay down in a water and shake with hands and legs stretching a undersuit. open a dump valve and slowly stand a verticaly in water.
@LarsDennert
2 жыл бұрын
This is the best valve drill assistance video I've seen. Great job. Here's a related tip for the single tank reach. Angle the tank valve 45 degrees toward you. You may need a reg with a turret for this though.
@urunancy2002
4 ай бұрын
It was awesome video, I could reach my valves with your recommendations. Thank you.
@patrickwolfe6604
4 жыл бұрын
Excellent presentation and great use of Woody and the rod to illustrate how your position affects your reach. I am a technical diving instructor and I am going to use your rod idea to help my students. Thank you for sharing.
@UTD_ScubaDiving
4 жыл бұрын
Patrick Wolfe thanks for your comment. Were are you based. We are always looking for sharp and dedicated instructors. If you are interested in becoming a UTD instructor send me an email at ben@utdscubadiving.com.
@victorkochkarev2576
2 жыл бұрын
Until this moment, I have seen the twinset valve drill as a form of torture. Now I can't wait to master it. Thank you for the great video and for explaining simple, obvious things I never thought of.
@colinvance903
3 жыл бұрын
Made valve drills much easier for me- thank you very much!
@intrimscuba
Жыл бұрын
An outstanding Explanation with a number of great pointers to help reach those twinset valves!
@johnl1144
2 жыл бұрын
Excellent video and demonstrations, thank you! Bonus tip for undergarments is on point!!
@piotrwilczynski5647
2 жыл бұрын
Great video. Loved the bit with the stick.
@cml79414
2 жыл бұрын
Great video Ben, 1 of my team mates just ordered his twin-set. I absolutely love the videos you do for our calendars and lessons. Keep up the great work! Cant wait to meet you at the skills camp in San Diego. On another note, I actually reach almost 6 cm further with my elbow pointing to the side. After the exercises that you showed the difference is even greater, (closer to 8 cm).
@dicktheaspergeron4988
Жыл бұрын
This was brilliant - many thanks. Newbie to twin set diving and struggling with buoyancy and trim BADLY but your advice has added immensley to my understanding. I've pretty much reset my kit back to where it was originally now rather than move the tanks down my back further. My first dive felt top heavy (I was "nodding" assumed it was the valve manifold weight) but I needed to add air to the wing.... moved the tanks down my back and now can't reach the valves as well as the suit squeeze problem at the shoulders (I'm very flexible at the shoulders normally) which you've brilliantly solved by the shrug move in the water. I've tightened the straps back up and made sure the D-rings are almost at the top to make sure they don't impinge the joint.... just hope I can get the twin set on and off now ! Really great though, thanks for taking the time to help us all :)
@john-paulbland7374
3 жыл бұрын
What a great bonus tip at the end. Thank you.
@ivoryjohnson4662
4 жыл бұрын
Thanks you for reviewing and updating this.
@diversdown2116
4 жыл бұрын
thanks that helps a bunch , stay safe & keep the videos coming
@richardwillamett821
3 жыл бұрын
bloody brilliant, what great advice and tips. Makes some much sense. Thank you and woody.
@mickydl66
3 жыл бұрын
Thanks a lot. beautiful lesson. Micky (from Italy)
@timgosling6189
2 жыл бұрын
Excellent advice.
@gray_wolverine63
2 жыл бұрын
That was great information. Thank you 😊 👌🏼
@deebsdeebs8664
Жыл бұрын
Great video!!
@juanpereira6258
2 жыл бұрын
Hi Ben, great information - Thank you so much. It help me a lot to improve as new diver with Twins. Do you have any reviews regarding the Nautec Valve? Thanks for info
@ruih1597
3 жыл бұрын
Thank you very useful tips!!
@meandtina
4 жыл бұрын
Excellent! I learned a lot.
@davidressler9316
3 жыл бұрын
Great tips
@SeattleRingHunter
Жыл бұрын
Great presentation mate. Thanks for sharing these tips. Cheer, #SeattleRingHunter
@bombousboy
2 жыл бұрын
Thank you very much.
@przemyslawwasilewski552
3 жыл бұрын
Nice explanation .Keep going :)
@shanetengaio5853
3 жыл бұрын
Excellent video.Would side mount diving be better than back plate diving if your flexibility is poor?
@UTD_ScubaDiving
2 жыл бұрын
Well in my experience, when people say they have poor flexibility is mostly the technique that is lacking and not the flexibility. I would say if you can stand up straight and look straight ahead or 45dgr upwards and put your hand between the tops of your shoulder blades you should be good to go. If this is not possible, then yes SM might be an option.
@grahammercer5968
4 жыл бұрын
Thanks. Very informative.
@UTD_ScubaDiving
4 жыл бұрын
You're welcome!
@scmsean
3 жыл бұрын
I've been trying to reach my valves for a while. I recently started laying on the floor in front of a mirror, so I could see what I was doing. I'm able to reach on the floor, but doing it in the water is so much harder.
@dirkrosemann1123
3 жыл бұрын
Thanks a lot......
@amrudiving
3 жыл бұрын
I’m struggling to reach the valves because of my shoulder mobility. Not even with my fingertips
@UTD_ScubaDiving
2 жыл бұрын
Well in my experience, when people say they have poor flexibility is mostly the technique that is lacking and not the flexibility. I would say if you can stand up straight and look straight ahead or 45dgr upwards and put your hand between the tops of your shoulder blades you should be good to go.
@mazulian
3 жыл бұрын
Now ...I get it...
@PROSTO4Tabal
2 жыл бұрын
it's shame nigel's upside down twinset is unpopular
Пікірлер: 37