Want to learn about industrial automation? Go here: www.realpars.com/individual-pricing Want to train your team in industrial automation? Go here: www.realpars.com/pricing-team
@oh8wingman
4 жыл бұрын
I remember working with a young student engineer years ago. He was charged with preparing test packs for hydro and was having some difficulty with some of the symbols so he would ask me, a pipefitter. One day I asked where his pipefitter’s handbook was. He told me he didn't have one and had never heard of such a thing. On my next days off, I picked up a handbook and took it back to work with me and I gave it to him. When he started to look through it he quickly realized that all the things he had been asking were contained within the pages of the book. He looked at me and asked, "So why don't they tell you to get one of these in University?" I told him I didn't know. In any event, he was always referring to it from then on. One day he asked me how he could find something in the plant. I told him to use the northerlies and easterlies. Again, a blank look. I asked if he had ever been told about them and he said no, he hadn't. I told him to reserve a couple of hours that afternoon and we would take a couple of isometric drawings out and I would show him how to use the coordinates shown on the drawings. He very quickly learned how to use those drawing coordinates to find what he was looking for and thanked me for my assistance. When I left that job, I never expected to see him again but as fate would have it I ran into him about ten years later on another site. He was sitting at a desk in an office he shared with a student engineer when I walked in. On the top of his desk was a very dog-eared pipefitters handbook and I laughed when I saw it and commented that he still had it. He laughed and told me he never went to site without it. Just then his office mate came in and he introduced me. He told his office mate show me what he had given him. The student engineer reached into a desk drawer and pulled out, you guessed it, his own personal handbook. I asked if he found it useful and he said he couldn't do his job properly without it. I looked back to my friend with a grin and then he said to me with a smile, "We are not too busy right now. What do you say we grab some Iso's and take him out and show him how coordinates work." We did and it was a great afternoon. I guess that is why some teach for a living. It is very gratifying to see what happens when your charge grasps what you take for granted…………
@tonnguyen1531
4 жыл бұрын
Can I have the name of this handbook? Now, I'm a young student engineer. Maybe in the next few years, I would like to be the same character like the man in your story. vantonnguyen1997@gmail.com You can send to my email, Sir! Hope you will help me. I love sharing knowledge to the others
@qwertz1234
4 жыл бұрын
Very good story and as young engineer i can confirm that in one year working in company you learn much more than in 4 years university. Teachers are recommending dull books and do not teach some crucial things.
@nooneanybodyknows1321
4 жыл бұрын
@@tonnguyen1531 Google Pipefitter's Handbook and you will see the book by Forrest Lindsey.
@adwayduttagupta9887
4 жыл бұрын
can anyone suggest me a plc handbook?
@patiakreles
3 жыл бұрын
As a new engineer I can tell you that every lesson that I receive is well treasured. Glad you got recognized!
@nooneanybodyknows1321
4 жыл бұрын
As a retired Journeyman Electrician, teaching is/was part of our job. It was my pride and joy to enlighten apprentices and watch their faces light up with every little trick of the trade. I remember each and every one of the men that helped me when I went through my apprenticeship. To teach is to touch lives forever.📖💪
@realpars
4 жыл бұрын
That's beautifully said!
@nooneanybodyknows1321
4 жыл бұрын
@@realpars Thank you
@mohammadshafiullakhan5604
3 жыл бұрын
👍 appreciated for your efforts and hardwork.. thank you sir
@nooneanybodyknows1321
3 жыл бұрын
My pleasure.
@aaminahrabaab635
2 жыл бұрын
It's really sad that in an industry I was interning at, nobody even cares to look at me. I wish I had more people like you in industries.
@TiberiusStorm
4 жыл бұрын
I remember learning this stuff in College last year. A lot of us would get confused between P&ID and PID Control (Proportional, Integral & Derivative). Now it doesn't seem so confusing thanks to gaining work experience.
@PulpyButtGoo
4 жыл бұрын
Shaine MacDonald I’m only in my junior year so I haven’t learned any of this stuff yet, but I just started a Co-op at a paper mill in process control and this channel has been helping so so much to get caught up on what’s going on
@ygy3110
4 жыл бұрын
me, too. confused between the two. but I'm not an engineer. I'm working at a chemical company as a translator. I knew little of this kind of stuff and have been watching lots of these videos
@kiranchoudhari4717
3 жыл бұрын
Every automation engineer, technician, maintenance engineer should watch and Like the videos.. realpars team taking lots of effort to make automation article... Thanks you team... Viewer are in more than likes.
@realpars
3 жыл бұрын
Thanks a million for your kind support, Kiran! We truly appreciate that.
@colingoldthorpe5918
4 жыл бұрын
We have some major ones in my line of work, never take for granted that the piping goes in the direction of the drawing. Best advice for a starting point is to find a piece of equipment upstream and downstream of something major to determine you’re going in the right direction. Once you get the hand of them they are pretty simple. Just make sure when you are printing off them you have each page related to the start and end of the process you are following. Nothing worse than being on top of a 500ft structure that’s under construction to realize you didn’t bring all the right sheets. You only learn that lesson once when it’s like 45C in China and you’re a mile from the control room.
@realpars
4 жыл бұрын
Thanks for sharing your knowledge and experiences with us, Colin!
@aniketgovardhan9208
4 жыл бұрын
Detail video on P&ID from symbol to complete diagram with an example would be great. Much to talk on this topic. Hope you will explore it more for us.
@alexandernorman5337
4 жыл бұрын
It's really a big topic, and one that you will learn more and more about over a period of years while working in industry. This covered the basics well enough.
@defender179
4 жыл бұрын
Aniket take a effort on one of your project which will be very detail and post the links here bro i wish to learn from it for your efforts.. definitely i share to my friends if that is more valuable than RealparS... hope you got that bro...
@sitikhairunnisa5748
4 жыл бұрын
Cannot learn only from a video.. Experience will help you more. This only for basic knowledge to introduce you to PID
@durpbawlwelf4269
3 жыл бұрын
I have to say, I was looking for help understanding these diagrams for college, and in 5 minutes you resumed fairly well a good chunk of my classes whie keeping me engaged, great work. ^^
@fodic6021
3 жыл бұрын
Watch P&ID video using EdrawMax at @FODIC kzitem.info/news/bejne/y36wv4yNaaRhdIo
@topten7064
3 жыл бұрын
Thanks alot , you are ocean because iam watching your video alot but until now Iam not reach the end of real pars video and 90 percent of my information because rael pars you're great
@ashishkhulbey
4 жыл бұрын
Excellent tutorial. Please make more videos on P&ID.
@realpars
4 жыл бұрын
Thanks for your support, Ashish! I will certainly forward your feedback to our course developers. Happy learning!
@abelashenafi6291
3 жыл бұрын
I like the way you describe everything in detail. Thanks for these great contents. Much love and respect real pars.
@realpars
3 жыл бұрын
We appreciate that!
@johnvrabec9747
9 ай бұрын
Good video, very basic. Our equipment P&IDs are very detailed, and lists the setpoints of controls, signaling direction and type (analog/digital) etc. We also have our valves separated by solenoid and pneumatic or hand control (isolation). Lots to learn but indispensable.
@realpars
9 ай бұрын
Thank you for sharing, John!
@athilaldurry5880
4 жыл бұрын
Many thaks,its very helpful information
@realpars
4 жыл бұрын
Great to hear that!
@fitzgeraldgerundio8123
12 күн бұрын
thank you Sir Añora❤
@antoniomarizcal1834
4 жыл бұрын
Excellent video and information, as always. Thanks for sharing this !!
@realpars
4 жыл бұрын
Great, Antonio! Thanks for sharing.
@fodic6021
3 жыл бұрын
Watch P&ID video using EdrawMax at @FODIC kzitem.info/news/bejne/y36wv4yNaaRhdIo
@ajitkatkar4232
4 жыл бұрын
Thank You Sir For This Videos , Your Videos are Very Informative& Knowledgeble For Us
@realpars
4 жыл бұрын
You are very welcome! Happy learning.
@michaelmatrimonio9733
4 жыл бұрын
With regards to Instrument location, in the Video the dotted line inside the circle indicated that the device is located in the control room while the solid inside the circle indicates that device is inaccessible to the operator. As per ISA-5.1-1984-(R1992) Standard it should be the other way around.
@oscarcubapacheco1271
4 жыл бұрын
of course, great , I agree with you
@normanhsu4258
2 жыл бұрын
aha! that's what I'm looking for! thanks mate!
@habebsabri4288
4 жыл бұрын
Hello You are a distinguished channel. It gives a distinct explanation and I wish you more success. Thank you for these informative craters.
@realpars
4 жыл бұрын
Thanks a lot for your support, Habeb! Great to hear that.
@kiingfro
9 ай бұрын
I was hopping for a more in-depth video on the symbols themselves
@realpars
9 ай бұрын
Thank you for your feedback! I will happily go ahead and pass this on to our course developers, hopefully this is something we can create in the near future. Thank you again!
@kiingfro
8 ай бұрын
not a problem. Thanks for the initial content and the response@@realpars
@AdnanAli-gw9tr
4 жыл бұрын
Appreciated but close loop open loop logic function etc. Should be in next Video. Thanks
@realpars
4 жыл бұрын
Thanks a lot, Adnan! Happy learning!
@jaycodes8790
4 жыл бұрын
Thanks for sharing the knowledge. I love your videos...
@realpars
4 жыл бұрын
You are very welcome, Asim! Great to hear that.
@samirniftaliyev2865
4 жыл бұрын
I'm thanking you and appreciate for your efforts to a good and useful information
@realpars
4 жыл бұрын
Great to hear that, Samir! Thanks for sharing.
@Levon9404
Жыл бұрын
Guys you have the best educational, thank you so much for that, just for that I signed up with you to check your library, when I needed
@realpars
Жыл бұрын
Thank you so much! We're very happy to read that.
@parthdahale2884
4 жыл бұрын
Thank you very much.
@realpars
4 жыл бұрын
You're very welcome!
@andressilva2402
2 жыл бұрын
I was wondering what those dotted lines meant🙏 you learn something new everyday.
@realpars
2 жыл бұрын
Glad it was helpful!
@camilogalvispacheco4781
4 жыл бұрын
Great video as always, can you guys please make a video regarding single line diagrams (for us non-electrical engineers)??
@realpars
4 жыл бұрын
Hey Camilo! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!
@shahidbashir9313
4 жыл бұрын
Can you make a video about scada control in hydro power station and study of electric panel drawing in a hydro power station and thereby helping to trace faults in a organized manner.
@realpars
4 жыл бұрын
Hey Shahid! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!
@ankitkamboj7379
4 жыл бұрын
Thanks sir for this information
@realpars
4 жыл бұрын
You are very welcome, Ankit!
@rhtd4925
3 жыл бұрын
Thank you so much! Your each video is very simple & helpful to understand & clear concepts. Keep making them!
@realpars
3 жыл бұрын
I'm happy to hear that! Thanks for sharing.
@asadiqbal87
4 жыл бұрын
thank u for provide this information
@realpars
4 жыл бұрын
You are very welcome, Asad!
@yttrium7901
4 жыл бұрын
Thank you for this great video. We would like more videos to learn Motion Control
@realpars
4 жыл бұрын
Thanks for your support and feedback! We are always happy to hear that.
@chappyaugusto
4 жыл бұрын
I think I mention before, the videos should be back to back, cause it to cause confusion, to look for what the viewer wants to watch, /, besides my comment great job guys.
@realpars
4 жыл бұрын
Hi Carlos, Thanks for your comment and feedback! We try to cover varies topics on here by listening to our subscribers suggestions. Our course library www.realpars.com, does have the back to back system, teaching on topic from start to finish. Feel free to check that out, that might be interesting for you. Thanks again for sharing!
@edcronin5409
4 жыл бұрын
this is all very simple things worked in a power plant engineer
@radhakrishna1008
4 жыл бұрын
Please make videos on how to read electrical circuit diagrams...
@realpars
4 жыл бұрын
Hey! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!
@fodic6021
3 жыл бұрын
Watch P&ID video using EdrawMax at @FODIC kzitem.info/news/bejne/y36wv4yNaaRhdIo
@hectornonayurbusiness2631
4 жыл бұрын
Wish they taught this at my college.
@shohabahmad5723
4 жыл бұрын
please upload video of oil and gas processing plant p and id
@realpars
4 жыл бұрын
Hey Shohab! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!
@SouhaillaRMS
4 ай бұрын
Thanks for this information it was very helpful, but i want to know which standard of P&ID instruments you followed at this video, and if you can support me with any link of references or material to have a deep knowledge of this topic.
@fatiras4600
4 жыл бұрын
Thank you so much for this intersting video ,please could you talk about how to read a electrical diagrame
@realpars
4 жыл бұрын
Hey Fati! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!
@alaaibrahim9742
4 жыл бұрын
Very useful, thank you
@realpars
4 жыл бұрын
Great to hear that! Happy learning.
@IEEAashwinPrasad
4 жыл бұрын
Nice videos on automation .Realpars can you please make vidoes on VLSI and embedded systems
@realpars
4 жыл бұрын
Hey Aashwin! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!
@mzh2360
4 жыл бұрын
hi i love to watch your informative videos. please make videos on oil & gas EFI system and other thing related to oil & gas industry. thnx n waiting for kind response
@realpars
4 жыл бұрын
Hey! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!
@mzh2360
4 жыл бұрын
@@realpars thnx and waiting for more good
@PulokKumar-00
9 күн бұрын
Very good. 🎉
@realpars
9 күн бұрын
Thank you! Cheers!
@ljubisaradovanovic9397
4 жыл бұрын
Very good presentation!
@realpars
4 жыл бұрын
Thanks a lot!
@awake780
Жыл бұрын
This is not a PID. This is a PFD with some instrumentation tag numbers added. Where are the line numbers, intermediary valves, etc?
@realpars
Жыл бұрын
Thank you for your comment. Technically, you are correct. A full-blown P&ID would be much more "congested: and not as clearly convey the basic control elements of a P&ID. Much of what is presented on a full P&ID is information related to piping, insulation, and mechanical details, which have been removed in this video to make the automation elements more visible.
@awake780
Жыл бұрын
@@realpars understandable, but it might be worth mentioning in the video as many who are new to PIDs may get lost in the complexity of some drawings.
@xxmarcioxx5386
4 жыл бұрын
Great video, thanks!☺️
@realpars
4 жыл бұрын
Thanks a lot, Marcio!
@osavimbiosizwe
3 жыл бұрын
How wonderful is this channel.......you really made it ......Thans you a lot.....
@realpars
3 жыл бұрын
Thank you, Nickson! We appreciate such kind support.
@osavimbiosizwe
3 жыл бұрын
@@realpars Thank you too......
@manishmewada261
4 жыл бұрын
please make a video about moter speed control throw plc in auto in help potentiometer.
@realpars
4 жыл бұрын
Hey Manish! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!
@vimalzacharia2109
Жыл бұрын
Can you please make a video on how to create a electrical design of control panel using the PNID Drawing. Thank you
@realpars
Жыл бұрын
Thanks for your topic suggestion, Vimal! I will happily pass this on as a topic suggestion to our course developers. Happy learning!
@tadjineoukacha3606
2 жыл бұрын
It is good explained thank you very mutch
@realpars
2 жыл бұрын
You are welcome!
@ahemednor5201
3 жыл бұрын
very good martial and tutorial
@realpars
3 жыл бұрын
Glad you liked it!
@logicmonster6197
3 жыл бұрын
I feel sorry for doctors and other courses for not having a channel like realpars for their courses, education should be in this way.
@realpars
3 жыл бұрын
Thanks a million, we truly appreciate such support!
@elvespedro6061
8 ай бұрын
I appreciate the way how you explain the contents…I downloaded your app in AppStore, and don’t have a available course, How does it work ?
@realpars
8 ай бұрын
Thank you for your comment! Would you be able to email our support team with that question (support@realpars.com), they will happily further assist.
@jinmactravish3209
3 жыл бұрын
Came here after seeing you guys on LinkedIn. Thanks
@kcprashant8559
4 жыл бұрын
Very informative thank 🙏💕
@realpars
4 жыл бұрын
You are very welcome!
@nourdhia5718
Ай бұрын
thank you
@realpars
Ай бұрын
You're welcome
@AniketGosavi
2 жыл бұрын
It's too informative.Thank You
@realpars
2 жыл бұрын
You are welcome!
@maninhoinacio2763
Жыл бұрын
Very good👍 For my knowledge, I learned too much
@realpars
Жыл бұрын
Glad to hear that! Happy learning
@mikekramer4886
4 жыл бұрын
This is a great video. I would like to be a Realpars student but I have little money because I am just a student and not employed
@realpars
4 жыл бұрын
Hi Mike, Thanks for your support! Great to hear your motivation, we hope to see you join the RealPars family soon! In the meantime, you could try out our free PLC Hardware course bit.ly/2XnnUrF Happy learning!
@vluessky
4 жыл бұрын
Thank you so much! Is this the ISA symbology you’re talking about?
@gassanali8667
4 жыл бұрын
Another great one!
@filimniko
4 жыл бұрын
Thanks!
@realpars
4 жыл бұрын
You are welcome, Nikolai!
@mohsenk5985
9 ай бұрын
Merci à vous
@shuhratxomidov8315
3 жыл бұрын
Thank you so much! Your videos are really good and useful!!!
@realpars
3 жыл бұрын
Thanks for your support, happy learning!
@vghjndghj
3 жыл бұрын
Very nice content , on thumb, one subscriber, one bell . Thanks Realpars
@realpars
3 жыл бұрын
Thank you!
@creativeeee
3 жыл бұрын
excellent video very informative and helpful
@realpars
3 жыл бұрын
Thank you!
@arkhatkarabalin2963
2 жыл бұрын
Thank you very much
@realpars
2 жыл бұрын
You are very welcome!
@jimbass924
3 жыл бұрын
Great video! Keep them coming!
@realpars
3 жыл бұрын
Thanks a lot, we surely will! :)
@techvevo814
4 жыл бұрын
great informations thanks for your effort can u make vedio about instrumentation sizing
@realpars
4 жыл бұрын
Thanks for the topic suggestion, I will definitely go ahead and forward this to our creator team. Happy learning!
@experttechnicians
Жыл бұрын
Informative video
@realpars
Жыл бұрын
Glad to hear that! Happy learning
@MSuhailAkhtar
3 жыл бұрын
Thank you sir
@realpars
3 жыл бұрын
You're very welcome, Suhail!
@syedmuzammilmehdihassni8456
4 жыл бұрын
Thanks for making great and useful content.keep it up guys👌👌👌👍
@realpars
4 жыл бұрын
You are very welcome, Syedmuzammil! Happy learning!
@fodic6021
3 жыл бұрын
Watch P&ID video using EdrawMax at @FODIC kzitem.info/news/bejne/y36wv4yNaaRhdIo
@ashfaqahmed-jh1yu
3 жыл бұрын
Hey Real pars if it is possible kindly make instrumentation troubleshooting solution in a practical way
@jimbass924
3 жыл бұрын
fantastic video
@sadasivanpillaikrspillai695
Жыл бұрын
Sir please making calibration videos
@realpars
Жыл бұрын
Thanks for your topic suggestion, I will happily pass this on to our course developers.
@kowshallramnarine577
4 жыл бұрын
Good job as always
@realpars
4 жыл бұрын
Thanks a lot!
@ernestofavio6735
4 жыл бұрын
Nicely explained
@realpars
4 жыл бұрын
Thank you, Henry!
@林聖博-b3j
3 жыл бұрын
THIS IS GREAT CHANNEL ON YOUR CHANNEL,AISO MY JOB IS MECHANICAL SUPERVISOR,I AM FROM TAIWAN
@realpars
3 жыл бұрын
Thank you very much!
@electronicayautomatizacion6758
4 жыл бұрын
As far as I know, the numbers represent the control loop
@MohammedAli-gp4rx
2 жыл бұрын
Great work and excellent teaching method thank so much it's very useful for engineers, please help from where can I download the standard reference codes table waiting for your reply on this thank you once again
@realpars
2 жыл бұрын
The applicable standard is ISA 5.1-2022. You can find PDF copies of earlier versions on the internet, but legally, the standard needs to be purchased from ISA (www.isa.org/products/ansi-isa-5-1-2022-instrumentation-symbols-and-iden).
@darbarisid
4 жыл бұрын
Very useful.. Thanks
@realpars
4 жыл бұрын
You are very welcome!
@otabektillavayev3309
10 ай бұрын
Thanks
@realpars
10 ай бұрын
You're very welcome!
@shuhratxomidov8315
3 жыл бұрын
Please. Could you present video's ABB LST300. I mean that how to calibrate it.
@realpars
3 жыл бұрын
Hi Shuhrat, Thanks for the topic suggestion, I will definitely go ahead and forward this to our creator team. Happy learning!
@ItsMamalfamily
5 ай бұрын
great video
@realpars
5 ай бұрын
Thank you very much!
@clementjr6700
Жыл бұрын
I have noticed that there are multiple controllers in the P&IDs I have encountered. These controllers control the various process variables(Temperature, Pressure, level, flow). With this distribution of autonomous controllers in the diagram, is it safe to say a plant uses DCS or multiple PLCs(ie one plc for each process variable). I understand PLCs can be used as DCS and in that case, does one plc control just one process variable?
@realpars
Жыл бұрын
Hi there, Thank you for your question! Yes, you are correct. You can have multiple PLCs controlling one process at a time or several PLCs controlling multiple processes simultaneously. It depends on your process, the type of PLC and manufacturer you pick, and the memory and I/O boards you install in your PLCs. Here is a link to help you learn more about PLC processes from Siemens, and you can compare them to other manufactures out on the market. support.industry.siemens.com/cs/document/90939626/tia-portal-an-overview-of-the-most-important-documents-and-links-safety?dti=0&lc=en-US Happy learning!
@yankyherrera3565
3 жыл бұрын
1 Identify in the P&ID the instruments that you consider for the measurement and control of the process. Explain. ? 2 Process variables being measured and / or controlled ? 3 Identify the process lines? 4 FO and FC what they mean for a control valve ? 5 Explain what the process consists of?
@realpars
3 жыл бұрын
Hi Yanky, Thanks for your comment! These questions would make for a great topic of a new video course. I will happily pass this on to our course developers for possible future video courses. Thanks for sharing and happy learning!
@fodic6021
3 жыл бұрын
Watch P&ID video using EdrawMax at @FODIC kzitem.info/news/bejne/y36wv4yNaaRhdIo
@praveendintakurthi7463
4 жыл бұрын
Excellent !!
@realpars
4 жыл бұрын
Thank you, Praveen!
@apollosolutions9961
4 жыл бұрын
Nice stuff !
@jam_gyul9991
2 жыл бұрын
May I know what was the relation of the pneumatic system below and the cracking process? For educational purposes only to describe the whole diagram.
@realpars
2 жыл бұрын
Hi Jam, Great question! This would actually make for an interesting topic suggestion for possible future video courses. I will happily pass this on to our course developers. Thanks for sharing and happy learning!
@sc-qj9gt
8 ай бұрын
From a 10-ton waiting bunker, a mixture destined for the production of dog kibble moves to a continuous, horizontal paddle mixer where steam (direct injection into the product) is added to moisten and heat the product. The temperature of the mixture upon leaving the conditioner must be 70°C, from the first kg (thus from the start - often referred to as hot-start mixers) to the last kg, but must not exceed a temperature of 80°C. This product then goes to the extruder, which shapes the kibbles, and subsequently moves to the cooler. Can someone help me drawing a flow diagram with sensors, controlers, indicators and actuators on it? After watching many videos I am still not able to do so. Thank you a lot!
@sc-qj9gt
8 ай бұрын
@RealPars? 🥺
@charndeepbhangoo7556
4 жыл бұрын
Thank you.
@realpars
4 жыл бұрын
You are very welcome, Charndeep!
@bipingore6658
4 жыл бұрын
Very good👍
@قصيعليعبدالهادي
2 жыл бұрын
I have a question hope to get answered. Is a pressure indicator (tagged as PI in P&ID) the same as PIT? I'm talking about the type of signal they send.
@realpars
2 жыл бұрын
No. Per ISA 5.1, PI =- pressure indicator (local indicator, no signal to control system) PIT = Pressure Indicating Transmitter (local indication and signal to control system - either voltage or current) PT = Pressure Transmitter (no local indication [blind] and signal to control system - either voltage or current)
@قصيعليعبدالهادي
2 жыл бұрын
@@realpars You have no idea how this answer helped me. Thank you...
@navidsharifian4123
2 жыл бұрын
Which software is used for drawing P&ID ?
@realpars
2 жыл бұрын
Any drawing package can be used to develop a P&ID. The two most common are AutoCAD and Visio. There are others as well, such as CADWorx, SmartDraw, MicroStation, eDraw, SolidWorks, and CREO. Many of these are expensive, but some free or more affordable packages are out there.
@nurnazifa3270
2 жыл бұрын
Hi, can I know where to put pressure control system at a fluidized bed reactor?
@realpars
2 жыл бұрын
For a fluid bed r4eactor, it is usually advantageous to put a back-pressure controller on the outlet stream of the reactor to maintain a constant pressure inside the reactor.
@lancarngaji23
3 жыл бұрын
Thank you for your great explanation. I would like to ask, what does the "not directly accessible" really mean at the solid line?
@realpars
3 жыл бұрын
"Not directly accessible" means that you cannot walk up to a panel and physically touch or manipulate the device. You have to pull out a rack, walk behind the operating panel, open an enclosure, etc. This is an older term, but it is still appropriate for field-mounted devices.
@lancarngaji23
3 жыл бұрын
@@realpars Thank you so much
@fodic6021
3 жыл бұрын
Watch P&ID video using EdrawMax at @FODIC kzitem.info/news/bejne/y36wv4yNaaRhdIo
@robinflb8791
3 жыл бұрын
thanks for the video. it helps ,me a lot but what do you mean at 3:37 "not directly accessible?" what does the pipe symbol crossed with 2 bars? (for instance of the top right of your scheme. Could you advise me a handbook? thanks a lot
@realpars
3 жыл бұрын
Instrumentation and piping symbols for P&ID drawings are defined in ISA 5.1-2009 (integrated.cc/cse/Instrumentation_Symbols_and_Identification.pdf). 'Not directly accessible' means that in order to access the device, you will need to open a panel or go behind a panel. I am not sure where you saw a "pipe symbol crossed with 2 bars" in the video. If you let me know at what time in the video it appears, I will be happy to help identify it.
@Roilbb
Жыл бұрын
Do you have Hazop and Hazid workshops?
@realpars
Жыл бұрын
Thank you for your question! Currently, we do not have any lessons on Hazop or Hazid. But there is always room for more fun learning topics. Thank you for your suggestions and I will pass this suggestion on to our developers. Happy learning!
@josearreazaoliveros6544
8 ай бұрын
How I can learn More about pid reading?
@realpars
8 ай бұрын
Hi Jose, Thank you for your question. Our RealPars learning website has just what you need to enhance your learning experience at an affordable price. www.realpars.com/courses You can also search and explore many topics on P&ID on the internet. I am including a link from a site you might be interested in exploring. www.isa.org/ Happy learning!
@lilsmurf1048
2 жыл бұрын
Hi, so now i'm helping my friend to do her job where she needs to make this diagram and she reach out to me to help since she's not really understand AutoCAD. Can anyone suggest any book, jurnal, website or anything to help me since i have no clue where to start 🙏
@ehabahmed615
4 жыл бұрын
The part of circle with dots or solid line , I dont understand , what do u mean by indirectly access & in field ? For example pressure transmitter (PT 44 ) with solid line
@Sarcastix7
4 жыл бұрын
He didn't say Indirectly. No line: In the field means somewhere on the factory floor, usually close to whatever it's controlling or reading. Solid line: Not directly accessible by operator could mean it's inside a locked panel or access is only to the engineer and not technicians but can be accessed if needed.
@alexandernorman5337
4 жыл бұрын
It has to do where the *process indication* is displayed - if at all. No line means that an indicator is available on or in the vicinity of the equipment. The dotted line means that the process value is indicated in a control room. Solid line means there is no indication provided for an operator to check. It is utilized by the control system, but you cannot access it without pulling the information directly from the control system. So, PT-44 has no indication provided within the plant - either on the equipment or in the control room. If you want to monitor it you have to pull it off the control system.
@realpars
4 жыл бұрын
Alexander Norman: Excellent reply to the original question. For complete descriptions of the symbology on P&ID's, refer to Standard ISA 5.1.
@alexandernorman5337
4 жыл бұрын
Thanks. I try. Something else everyone should keep in mind is that P&IDs will look slightly different from plant to plant. They don't vary much, and with a little bit of consideration you can understand any of them. But there are different standards that plants will adhere to as their official code of record. And even if they abide by the same standard, they may adhere to different revisions of that standard.
Пікірлер: 266