im thinking of doing this for my project truck , which i am using the BOP rear end , currently with drums . I'm not exactly sure what year it is but it has 3 inch tubes 5x4.75 lug pattern and the 10 bolt diff cover with the indents . You guys make it look so easy .
@duaneshoemake7826
4 жыл бұрын
Best price for a good kit!
@agutierrez7141
2 жыл бұрын
What recommendation can I get for my stepside 2005 chevy silverado 400ss . I want to replace the drums with dics
@alijassim2408
Жыл бұрын
Will this fit a Camaro 1967 because I bought it but I didn’t notice that it’s for 1968!!!
@charlesmcmartin8659
Жыл бұрын
1967 Camaro is not a staggered shock set up like the 1968 and UP F Body. You will need to buy the DBK1012 and not the DBK1012S
@gogoragus4033
2 ай бұрын
Apakah anda membuat untuk chevy trooper
@holden2260
2 жыл бұрын
Got a Holden commodore vt (V body) any know a kit? Rear drums stuffed and failed warrant 😐
@BilaRana-rv5wn
Жыл бұрын
Can we ABS in old cars ?? Like ke70
@101Volts
3 жыл бұрын
Any chance you have a kit that would fit a 1990 Mercury Grand Marquis? I believe my car has the 9 inch drum brakes. I looked on your site and didn't see it, but perhaps you provide parts for a different Ford that used the same standard equipment? Also, wouldn't I need to also replace the master cylinder with one of a different design?
@charlesmcmartin8659
3 жыл бұрын
Sorry we do not have the parts for the application that you have requested.
@eddieflores2385
2 жыл бұрын
What brake calipers do they use ?
@jbaker400
Жыл бұрын
Thanks for sharing the video.... one question if i may? is there a way to shim the calipers and brakes pads 'outward' as opposed to inward? that seems to be my issue..... Thanks
@charlesmcmartin8659
Жыл бұрын
There is no way to shim them out. We set these up on stock axles. You will need to make certain if you are changing axles that they are exactly the same length as stock.
@andresvilar4921
4 жыл бұрын
El diferencial que tengo es un dana 44 y le quiero poner un kit de freno a disco Agradeseria tu respuesta
@andresvilar4921
4 жыл бұрын
Para ford viene algun kit? Soy de argentina y tengo una ford f100 1988
@Mike-xn1bh
3 жыл бұрын
@Inline Tube, do you make a kit for the Sterling 10.25?
@edwardedgar9577
2 жыл бұрын
Hello, sorry I have a 1992 4.9 L Ford F-150 6 inline pickup truck Rear Gawr 3166 LB and Total GVWR 5450 LB and I want to convert it from drum brakes to disc brakes. Could you tell me which are the ideal brake discs to use in this truck, please. Thanks.
@charlesmcmartin8659
2 жыл бұрын
Sorry We do not carry any brake kits that would fit that vehicle
@JohnSVT
Жыл бұрын
Question, what if my car doesn’t have the E brake cable , can I still use that caliper?
@charlesmcmartin8659
Жыл бұрын
yes you must set the e-brake regularly in order to keep the pads adjusted. The good news is we do have the e-brake delete kits in stock.
@charlesmcmartin8659
Жыл бұрын
No you would have to use the e-brake delete kit
@77camaro
3 жыл бұрын
My left caliper ebrake adjusted like you showed. The right caliper piston just goes in and out. Is my caliper defective?
@inlinetubeco
3 жыл бұрын
Please send a picture and description to support@inlinetube.com to reach the tech department. They will be able to help you with this issue.
@ray_1111
Жыл бұрын
will this work on a 1981 buick riviera?
@charlesmcmartin8659
Жыл бұрын
Ray, I have not sold one of these for a Riviera. What Axle do they have?
@coachk7674
3 жыл бұрын
everything is out of stock so when do you expect to have any in stock?
@charlesmcmartin8659
3 жыл бұрын
We are working hard to get all of our kits back in stock. If you click the notify button on the kit your would like on the Website. We will send you an e-mail right when it is back in stock. Right now we are around 3 weeks
@NickeyChevelle
2 жыл бұрын
Do the Lug Nut Studs have to be replaced on a1969 Chevy 12 Bolt rear? I read they will be 1/4 inch too short after reassembly.
@charlesmcmartin8659
2 жыл бұрын
I have not run into this issue before. Sometimes It will depend on the wheel you use also.
@thakalilife9052
4 жыл бұрын
Please make one for the G body kit
@inlinetubeco
3 жыл бұрын
Here is a link to the G-Body Video kzitem.info/news/bejne/tWuataShrXhkdG0
@kamranafridi26
2 жыл бұрын
Sir can we convert rear drum break to disc break in my suzuki van 1982 model.and how much cost..
@charlesmcmartin8659
2 жыл бұрын
Sorry we do not offer a kit for the application
@joshuamcpeek4708
2 жыл бұрын
Where do you get new pads when they wear out
@charlesmcmartin8659
2 жыл бұрын
These pads can be purchased at any auto parts store. Please contact support@inlinetube.com for your application.
@gabrielrodriguez8383
3 жыл бұрын
Do y'all make some for a 79 and 89 Chevy Caprice car's
@inlinetubeco
3 жыл бұрын
That depends on the axle that was in your car. Our kit is built for a 10 bolt or 12 bolt axle that originally came with 9 1/2" drum brakes.
@stevebigler
4 жыл бұрын
Make a kit for Dana 44 (Scout II)
@VictorRivera-xt1nl
4 жыл бұрын
what happens to the emergency brake?
@joshuamcpeek4708
2 жыл бұрын
You'll need to install a hydraulic parking brake
@rvid8885
3 жыл бұрын
Is this process or kit can apply to mitsubishi suv and pick up?
@inlinetubeco
3 жыл бұрын
Sorry We do not offer this for that vehicle
@Fadly157
4 жыл бұрын
Is there for land rover series converter kit like this?
@inlinetubeco
4 жыл бұрын
Unfortunately, we do not carry any kits for Land Rover.
@yashsalgaonkar9143
2 жыл бұрын
Can make video for abs varient car
@charlesmcmartin8659
2 жыл бұрын
Sorry we do not sell any kits for those vehicles.
@moe16313
4 жыл бұрын
How do you adjust the rear calipers ?
@charlesmcmartin8659
2 жыл бұрын
Please check Inline Tube for the how For the rear calipers.
@tysne13official90
3 жыл бұрын
Will this fit a ford ranger
@inlinetubeco
3 жыл бұрын
unfortunately it will not fit a ford ranger.
@georgenettlesjr1466
3 жыл бұрын
My kit didn't come with a dust shield how can I purchase one of these?
@inlinetubeco
3 жыл бұрын
Only the A, F, and X body kits have backing plates. Please contact our support team at support@inlinetube.com and we can provide you with the correct part # for your vehicle.
@donaldweatherford1709
2 жыл бұрын
Seems like an easy process for F body ,and a good product ,but everything is out of stock
@charlesmcmartin8659
2 жыл бұрын
Kits will be back in stock within the next few weeks.
@costaflanka3945
2 жыл бұрын
Why not show how to remove c clip
@charlesmcmartin8659
2 жыл бұрын
Please Check out our G body rear disc video where we show how to do that
Пікірлер: 58