Another great video,for our alfa's 156,thanks bruno.
@alfaromeonoproblem
3 ай бұрын
Thanks for watching
@amaned5810
Ай бұрын
Hallo :))) As a first your videos and the way you share your knowlage is amazing! I will be selfish and i wish that you live and work near to me closer as it is possible! I own 159 2.4 qtronic and i fall in love with everything about that car 😊 I have some issues with my SW and i really pay a massive money to mechanic who destroy my car! As i give it to private garage there i stay without guaranty and with problems in my hands, as they say "its alfa romeo, those cars are junk get rid of them" So i decide to get rid of mechanic:) and start to learn with 35 years in my as$, bit wird but i don't have much options. I already have learn a lot from you! I replace a lot of parts alone by my self and i build one eye catching car!!! There is still some things to do but it is not such issue, thank you for every secund you share with us! God bless you
@elisergigarage
3 ай бұрын
Hello, Thanks for the Video! Always very clear and precise. We are all the same, always postponing repairs to later.
@alfaromeonoproblem
3 ай бұрын
Thanks for watching
@Fs_Media
3 ай бұрын
Thank you very much for the video. It is very helpful 😊
@alfaromeonoproblem
3 ай бұрын
Thanks for watching
@rafiekahmed8568
3 ай бұрын
Hi Bruno thanks for sharing I have a question or a request do have a video on the removal and fitting of giulietta tct gearbox with all the clutch settings and calibrations
@alfaromeonoproblem
3 ай бұрын
Hello. Thanks for watching. As soon as I get one I'll do it. But they are very few to none here in Portugal
@nesim4393
3 ай бұрын
I would be very happy if you answer.I am a 2005 model 1.6 TS 156 user.Engine renewed thermostat and water circulation were replaced with original parts.But the temperature still exceeds 90 degrees (The line between 90 and 130) It gets close to 110 degrees when stuck in traffic or going uphill.When the road gets better, it drops to 90 degrees again. Do you think this is normal?
@nesim4393
3 ай бұрын
Could the engine be damaged due to these temperatures (95-110)? (did not lose any water)
@alfaromeonoproblem
3 ай бұрын
Hello. Yes, it's normal. But check out if the resistor for the first fan speed is ok
@alfaromeonoproblem
3 ай бұрын
If the system is good, no leaks, no problem
@glsmadaful
3 ай бұрын
Hi, hope you can help me with the following? I have a 156 2.4 jtd 20v, I see the air intake has oil at the throttle body. When driving the car searches in speed and also lags when acceleration. I removed the turbo, but don't see any oil leak.
@alfaromeonoproblem
3 ай бұрын
Hello. Its normal to have oil residue. Don't worry. Perform a diagnosis, do not replace anything
@harry-james-books
10 күн бұрын
I have a question: my Mito popped the rght hand differential seal (the seal you refit, but the other side) but in the 10Km I had to drive slowly home, it seems like the bearing has taken a beating and three of the rollers came out with the driveshaft 😑😑 Any idea if I can replace the bearing with the gearbox in place? I have pullers on hand - I really don't fancy dropping the gearbox out if I can help it. I guess I better check the left side as well while I'm at it 😬 (PS: Obviously I will count rollers to make sure none have fallen inside...)
@alfaromeonoproblem
9 күн бұрын
Hello. Check out the engine mounts are properly secure. The bearings of the differential? You have to remove it out of the car.
@harry-james-books
9 күн бұрын
@@alfaromeonoproblem Yes, thanks, done more research now. I'm going to split the diff with the gearbox in the car and replace the bearings and seals, then whack it back in and see what I've got... if the rest of the box isn't like a bag of nails it gives me a while to get a press and a bearing kit together... By the way, if you do a search for "Fiat 500. Reparacion caja de cambios" the guy Pedro Marin Larrosa has done a great rebuild video on the box. Thanks for coming back to me, and for the channel in general. Keep up the good work 👍👍😎😎
@harry-james-books
8 күн бұрын
@@alfaromeonoproblem So out she came - and what a mess 😶😶 The right side bearing had destroyed itself and the diff had been wobbling around in the housing - it even managed to knock a hole in the housing (luckily on the "bottom" half, not the gearbox itself) It's about 20mm x10mm and I should be able to repair it with fibreglass. I can't feel any play in the output shaft, but I'm going to bite the bullet and take the whole box out tomorrow, purely because of the amount of swarf and crap in the diff housing, and on journey home, while all gears were noisy as you'd expect, third was particularly horrible sounding. Having gone this far, I'll kick myself if I have to do it all again. Once again, thanks for your help 👍👍
@danyibalazs3555
3 ай бұрын
Hi! I have a 147 and the problem is that the oil is leaking somewhere (valve cover gasket replaced) and a lot of oil is gone (5w40)
@alfaromeonoproblem
3 ай бұрын
Hello. It's it a TS or diesel?
@AlaaAldeen-ns8lu
3 ай бұрын
السلام عليكم كيف احصل على مواد احتياطية الفاراميو ١٦٤ في العراق
@alfaromeonoproblem
3 ай бұрын
Hello. Can you please translate to English?
@AlaaAldeen-ns8lu
3 ай бұрын
Hello .how i can have car equipment for my alfa romeo 164 and iam from iraq
@alfaromeonoproblem
3 ай бұрын
@AlaaAldeen-ns8lu hello. Try the several Facebook Alfa Romeo dedicated groups. Often they have parts to sell
@DashCamSerbia
3 ай бұрын
A guy from work had that issue with the worn out splines on the driveshaft/semiaxle on his Zafira A 2.0 DTi. And not just play, it was completelly turning on the splines under heavier acceleration. Your engine is 115 hp? A new complete SKF driveshaft is 220 euroes. I would just get that instead of messing with all of this. It is not worth it if the part is available.
@CostaTropicaldeGranada
3 ай бұрын
The mechanic here in Southern Spain has just put on a new (remanufactured?) driveshaft (the longer one), and the vibration is actually the same if not worse than before 😮. I am going to ask him who the manufacturer is.
@CostaTropicaldeGranada
3 ай бұрын
Which companies make the best re-manufactured driveshafts etc you mentioned SKF.....Any other names to use or avoid ?
@DashCamSerbia
3 ай бұрын
@@CostaTropicaldeGranada I don't think there are factory remanufactored ones. I would just buy a new one from a reputable manufacturer. Basically sort by price, highest first.
@alfaromeonoproblem
3 ай бұрын
Mine is the 140hp. I do not like skf all that much.. At least the supply for Portugal is awful..
@DashCamSerbia
3 ай бұрын
@@alfaromeonoproblem But the CV joint that you have installed is SFK. :D For 140 hp it is the same part and price. The SKF one is 3 times more than the Chinese GSP.
Пікірлер: 34