Worked perfectly. Bought a $10.99 refill kit , came with (2) black ink bottles and (1) each of red, yellow, and blue ink bottles. I have a Canon TS-202 and I refilled exactly as you showed and WaLa it worked! I printed a B/W test sheet and a Color test sheet. Both came out perfect. Thank you, you saved me so much money because each cartridge is $16.00 each.
@CopyPrintScanChannel
Жыл бұрын
Glad it helped!
@FlawlessRuby
7 ай бұрын
Simple and to the point! I would have never dare to stab the top without knowing! Side note for people doing the black. I just peel off the bottom label without removing it to make it easier. Also beware when removing the needle from the syringe it will splash ink around!
@kahnellacc6252
Жыл бұрын
Best straight forward tutorial ever, ❤
@reesesandkoko
3 жыл бұрын
It was a very messy job for me, but it worked . Thanks.
@catherinespry7254
2 жыл бұрын
you never said how much black ink to put in, only for color you said amount
@abigailportillo293
2 жыл бұрын
For the color cartridge. How do you know which color is which?
@history-stamp
2 жыл бұрын
rewatch video. he doesn't mention the first color. but he does mention the other colors; or clean a syringe. Insert in previously drilled opening. You should see some color on syringe.
@funniestthingsever2779
2 жыл бұрын
Color Cartridge Has 3 Holes. The Top Is Red, the Bottom Left Is Blue, And the Bottom Right Is Yellow.
@repentANDobey
2 жыл бұрын
the magenta (M) is on top, from left to right under that is cyan (C) & yellow (Y). hope that helps!
@hoanganhtran9599
Жыл бұрын
Great tutorial! How many times can we refill a cartridge until it goes bad? Mine got "dried up" after a few times refilling
@CopyPrintScanChannel
Жыл бұрын
It should be 5 to 10 times.
@joannsumner1960
2 жыл бұрын
Okay so how do you know where to put the color in? If I put yellow in the plus spot I'll have to just go buy a new one anyway.
@repentANDobey
2 жыл бұрын
the magenta goes in the top and on the left side is the cyan and the right is the yellow. so the M on top and C & Y from left to right. hope that helps.
@dbonney20
Жыл бұрын
Use a toothpick to put in the hole and touch the sponge, then remove to see which color it is.
@nsknstiounv
3 ай бұрын
The cartridge I have, number 243, has channels like this, but it is closed and does not take the paint inside.
@OffTheRailGaming
Ай бұрын
Yeah he says "just put a hole in". And didn't even show it. It cuts out. Come on man!
@nsknstiounv
Ай бұрын
@OffTheRailGaming yeah did hole now its working
@OffTheRailGaming
Ай бұрын
@@nsknstiounv how did you do hole??
@nsknstiounv
Ай бұрын
@@OffTheRailGaming write your mail here. I will give inf tomorrow
@phillipsteinmetz1880
Жыл бұрын
Thank you so much!! Very helpful!!😊
@CopyPrintScanChannel
Жыл бұрын
Glad it was helpful!
@OffTheRailGaming
Ай бұрын
How are you supposed to make the hole? Just poke it? I have Pg-243 and I had a very difficult time poking a hole in there.
@CopyPrintScanChannel
Ай бұрын
Use hot metal piece to melt it easily.
@OffTheRailGaming
Ай бұрын
@@CopyPrintScanChannel That's not a bad idea!
@creationsbyaurelia983
Жыл бұрын
Can i reset printer to stop the blinking to allow the printer to print again? If so, how do i do this? thank you in advance.
@jenreports9761
2 жыл бұрын
can i use office depot brand refill ink ideal for stamping even tho it does not specify printer ink?
@CopyPrintScanChannel
2 жыл бұрын
I have never tried it. You can try and see if it works.
@jenreports9761
2 жыл бұрын
crossing my fingers
@edy5082
Жыл бұрын
results ??
@lorettacaputo6997
2 жыл бұрын
Are people refilling canon 243 ink cartridges that were used on other printers such that the current printer does not recognize the new "refilled" cartridge? I am noticing that there is a brisk business in selling empty ink cartridges and I am thinking this is the only way I can refill and use a canon ink cartridge.
@beverlyHillsAgent
2 жыл бұрын
i refilled my black cartridge, but the paper printed out still have no ink
@CopyPrintScanChannel
2 жыл бұрын
Try to rub the print head with a wet wipe or cloth to let ink start working. Then insert the ink cartridge
@laudennn
2 жыл бұрын
thank you!
@Diamond-cr6fx
2 жыл бұрын
How do you know which color ink goes into color cartridge. 🤔
@yadid8740
2 жыл бұрын
Poke it with the niddle first wipe it off white paper and ull see the color
@terissashirley8380
2 жыл бұрын
@@yadid8740 how do u know if your is dried and no color is coming out ?
@yadid8740
2 жыл бұрын
@@terissashirley8380 I'm not sure mine had ink still.
@adelittastanton
2 жыл бұрын
What tool did you use the first time?
@CopyPrintScanChannel
2 жыл бұрын
Use a screw diver smaller size.
@repentANDobey
2 жыл бұрын
i got one from the place i ordered the refill ink however, I have an electric hand drill and i just use the attatchment that offers the ability to drill a hole. That's easier if you don't have the strength to drill a manual hole. Hope that helps!
@queenofcups1122
3 жыл бұрын
Thank you
@jamesmock8685
2 жыл бұрын
how much ink ? to the top??
@jamesmock8685
2 жыл бұрын
do i fill to the very top basically?
@BiggyCharles-q8z
2 ай бұрын
I drilled a small hole in the black ink cartridges and filled it with 5ml of black ink. But the yellow light is still on saying low ink. Now what?
@crispysocksss
2 ай бұрын
Hold the cancel button
@tainomario
2 жыл бұрын
I did the exact same thing as you but my printer still shows the 2 yellow lights like if was out of ink any suggestions ??? Thank's
@yadid8740
2 жыл бұрын
I need help with this too
@tainomario
2 жыл бұрын
@@yadid8740 i got it working even though the lights blink i cleaned the cartridge with a Qtip and alcohol
@yadid8740
2 жыл бұрын
Mine works I was just wondering how I can turn the Yellow lights off
@Rishu-c1s
29 күн бұрын
How to do a hole? I am unable to make a hole
@lynaeschaffner8497
24 күн бұрын
I have a small solder tool and it worked amazingly
@ghostakogaming6694
3 жыл бұрын
why does the printer keep saying ink low? And the cartridge full?
@CopyPrintScanChannel
3 жыл бұрын
The inknis not reset thats why it say that but use it normaly it will not jave any issue with printing
@XxglowslyxX
2 жыл бұрын
OK so why when I print out any other picture besides the print quality test it comes out weird looking pixelated textured it doesn’t come out smooth and fully pigmented
@CopyPrintScanChannel
2 жыл бұрын
May be ink is clogged inside the cartridge and if it improves then good if not you may have to buy an ink cartridge. But give a try for ink cartridge alignment and clean print heds to improve the results.
@XxglowslyxX
2 жыл бұрын
@@CopyPrintScanChannel ahh ok I will do that thank you
@robertkise
2 жыл бұрын
This could have been a lot easier if you would have explained which hole is for which color of ink and didn't keep flipping the cartridge.
@jamesmock8685
2 жыл бұрын
what flipping? r u blind? dude coulda said more.. maybe? does know know English well?
@joannsumner1960
2 жыл бұрын
I agree Robert knowing which hole is for what color is kinda important
@user-pz4jk9tb7d
7 ай бұрын
He was pretty clear and spoke really well.
@godessofyouguess
3 жыл бұрын
Where does the hole go?!?
@CopyPrintScanChannel
3 жыл бұрын
Its on the round spot made on the cartridge under the label.
@godessofyouguess
3 жыл бұрын
@@CopyPrintScanChannel thank you
@jameswright-2024
Жыл бұрын
👍
@macmanjimmy69
3 жыл бұрын
with a new cartridge how much ink are you able to use before you start refilling, last one went to low and lasted a few refills then showed empty... Thanks
@ArcticCustomProps
2 жыл бұрын
There's a way to tell the printer to ignore the ink levels. If you do a Google search, you can find out how.
Пікірлер: 70