Thank you! I've been putting off refilling the tank because I couldn't figure out how to do it. 😊. Very clear video.
@teresav489
Жыл бұрын
Simple and clear. Followed your instructions and I did it in 3 minutes. Thanks!
@maxc1520
Жыл бұрын
Thanks for a good tutorial, nice steady and precise talking. My printer is the ET-7700, we followed your video. All set now for the next 4 years. Greetings from N/W England
@merrylrosenthal
Жыл бұрын
Thanks for your clear, concise tutorial. After watching it, I refilled the ink without a hitch.
@marciapulling585
2 ай бұрын
Your demos settled my mind about using liquid ink in my new hp printer. I had visions of ink spills all over the interior. Thanks!
@mondob2867
Жыл бұрын
Thanks! It looks simple but if something can get screwed up...I am the person who can do it! Watching this made me feel much more confident as I filled my new Epsom EcoTank Printer. Greatly appreciate your taking the time to do this for folks like me.
@61dodgelancer
Жыл бұрын
Great job of explaining how to accomplish this task. I actually have a different model Epson printer than you're demonstrating with. I own an ET-4760 Ecotank printer. But Epson's video is not as good as your video. You helped me understand that I needed to lift both sections of the scanner unit and force it open past the resistance point until the scanner unit stayed in place in the upright position. This is different from just lifting up the top scanning plate. I had a difficult time making the scanner unit stay in place in the upright position. I hope my comment helps other people. Some videos are much more helpful than others.
@bien.dotado
8 ай бұрын
Nice job. Good camera work, clear slow instructions, thanks!
@mikdonaw1982
Жыл бұрын
Your video was very helpful to what I was wanting to know, that the tanks wont overflow & automatically stops filling when full enough. Even If there’s Ink at the bottom first line. Thank you!!!
@jamesbleess5282
6 ай бұрын
I watched the video, no mystery remains, I changed ink with no mess and no parts on the floor. Good video! Thank you. Yes, I had to gently lift both top section until it remained up. Down in one motion. Ink fills promptly, I did tap the bottle to start flow. No part of this required any extra effort.
@hugosabato7662
Жыл бұрын
Thank you, all of the other videos I found were garbage. Much appreciated
@datfamusTV
2 ай бұрын
I wanna say Ty I couldn’t figure it out for months and you helped so Ty
@Mayahueli
Жыл бұрын
Thank you for this, exactly the instructions I needed :)
@themorningnevercame8618
6 ай бұрын
Straightforward and Useful, Thank you GEO.
@magaliejhumun2975
Ай бұрын
Very clear information. Thank you very much.
@morkarmorgan3161
Ай бұрын
Thanks you clear and to the point!!!!!
@randeescott9760
8 ай бұрын
Thank you for a great tutorial. Appreciate you!
@janeperkins
6 ай бұрын
You’re a life saver, thank you
@summermcmillan9545
6 ай бұрын
This was helpful! Thank you.
@DaisyTrujillo88
18 күн бұрын
Very easy guide to follow!
@leor4644
Жыл бұрын
very useful video , i would like to know if after the initial set up its a good idea to fill up the ink tanks with the remaining ink thats left on the bottles..
@beanbean321
10 ай бұрын
Thanx : You Are "The Man" .
@LovelyLinda.
Жыл бұрын
Thank you for sharing this video.
@C.C.744
Жыл бұрын
Thank you for the easy demonstration and explanation of how to refill the ink! I couldn’t figure out how to do it myself, and heard someone say it could get really messy. No problems following your instructions. 😊
@bluemac9476
Жыл бұрын
I have an older model Epson ET-2500. Can I use the new inks which have different numbers on the bottles now?
@teresitotaboadasvlog3385
3 ай бұрын
Thank you so much, this video is very helpful for me.
@srividyaramadugu7430
Ай бұрын
beautifully explained
@danielsilset8555
Жыл бұрын
Is 502 ink the only usable ink for this printer model or can I use a different epson ecotank ink such as 102 or104?
@jimbennett1227
9 ай бұрын
very good video, you are very clear in your explanation. The audio however sounds as if there is an echo, so I had to repeat a number of times to understand what you are saying. maybe a better microphone or maybe a non echo room, not sure. but other than that, your video was great.
@IzludeTingel
Жыл бұрын
What's the difference between 502 and 542 ink? Looking at the et-15000, which comes with 502, but it's said that people like using 542 instead. Why is that? Both say pigment, but is one different than the other?
@normangirigorie886
2 жыл бұрын
I own an ET-4760 Ecotank printer that uses the same type of ink. You do not have to worry about mixing the ink in the incorrect container.The ink bottles are uniquely slotted and are not interchangeable.
@slothy89uni
Жыл бұрын
You would think so, but I’ve seen someone manage to force the wrong colour toner into an $10,000 copier to the point it registered it as installed then proceeded to print causing the complete malfunction of the machine. These toners were also keyed!
@wstt4
3 ай бұрын
Do you have to fully fill the tanks or can you just put a little in?
@John-kd1bf
Жыл бұрын
The Epson videos are for filling ink on a new printer and all their videos say you need to charge the ink. Do we have to charge ink when refilling a tank whether all or a portion of a tank?
@carolyncole6736
Жыл бұрын
I cannot get my black to refill. I place the black ink bottle correctly, but no black ink will flow into the printer. What should I do. It is only happening with the black.
@kathymsmith
Жыл бұрын
I have the same problem
@tamekasturdivant2681
8 ай бұрын
I am having the same problem.
@mazzynznz
6 ай бұрын
I had this happen 😂 I still had the plastic seal on the bottle 😂😂😂
@LidiaTsegay
8 күн бұрын
I have the same problem
@isithotmama
5 ай бұрын
I'm thinking of purchasing this printer can I fill it halfway for someone who doesn't print that often
@HabeshaFamily
25 күн бұрын
Thank you 🙏
@robertfleckenstein7633
9 ай бұрын
THANK YOU FOR GREAT LEASON
@brians9033
11 ай бұрын
The tops of the bottles are notched differently so they will only fit on their corresponding "tank". There should not be a situation where ink is put into the wrong color tank.
@lq3982
3 ай бұрын
what do you do if the ink doesn't drain out and the window is visually empty?
@cobravenomX1
Жыл бұрын
i just got new ink for my printer and the bottle don't fit at all am i missing some thing??
@user-vx5cl6ul6l
Жыл бұрын
will the tank accept ink from a large bottle
@yassirahmed5961
11 ай бұрын
Thanks a lot
@NourishMoveRestReflect
Жыл бұрын
This might be a stupid question, but I was just wondering - after I've filled all my ink tanks initially, some ink gets used after the printer charges the print heads (or does something like that), so I see the ink levels have gone down almost one line. There was some ink leftover in each of the bottles after initially filling - can I now use the rest of the ink in these bottles to fill the tanks up a bit again? Or is it recommended to only fill the tanks when they are almost empty?
@odescha
Жыл бұрын
Yes you can
@waltmezynski8493
Жыл бұрын
Thats what the directions tell you to do!
@imtherain
8 ай бұрын
also works with sublimation ink
@2394Joseph
Жыл бұрын
Remove the filler cap from the bottle and check that there is not a plastic cover that you have to pierce first before you insert the bottle into the printer. I did have that problem.
@sergekatshunga1912
5 ай бұрын
Helpful
@sunscloud_yt
9 ай бұрын
teaching me how to do the shit my parents never did o7 ty :]
@dholmlund
11 ай бұрын
I have an EPSON ET-2760, and it's basically impossible for me to see how much ink is in my ink tanks. The plastic is too thick or something... Even if I use a flashlight to try to illuminate it--I have no idea how much ink is in my printer 'cause I can't see it. Also--I tried putting more ink in my printer, and all I'm getting right now is black ink prints... They need to re-design the EcoTank a bit. I haven't even printed a bunch and I'm not really getting any color prints... Pretty disappointed. I wonder if my ink dried out--I feel like I shouldn't have had to buy more ink this soon... If they redesign one thing about the EcoTank, it should be the plastic that holds the ink. It needs to be easier to see through so one can better know how much ink is in their printer.
@SuperLittleTyke
3 ай бұрын
It wasn't clear whether the fill process stops automatically when the tank is full.
@beeda69
Жыл бұрын
How to fill the bottles with ink?
@MrEddie68000
Жыл бұрын
Why is it more economical? Can you refill it several times with the same bottle?
@TallysVids
Жыл бұрын
Because you get heaps more ink in the ink bottles than you do in an ink cartridge. For example, with my Brother printer, the ink cartridges hold 7.5 ml of ink. A bottle of the Epson ink is 70 ml and the ink tank holds around 65 ml. So you can see from this where the savings come from.
@timt1717
2 ай бұрын
So, Epson have changed the refills to make these incompatible with older Ecotanks
@slicedpage
Жыл бұрын
very helpful thank you. I have one concern though. What happens once most of the ink has been used but not all and I want to refill the inks with new bottles. Is there a risk of overflowing the tanks?
@AlistarToTheMoon
Жыл бұрын
No risk it knows and auto stops filling
@gm4210
4 ай бұрын
Mine wont fill at all
@charlottetuhy8395
2 жыл бұрын
On my printer, the black ink is low, but it will not flow. Do the fill ports ever get clogged?
@TylerCocci
Жыл бұрын
Same issue
@whitneysterk6365
Жыл бұрын
I'm having the same issue with my printer. This will be the second time refilling with the first set of bottles, but nothing is filling into the tanks and just slightly pooling around the nozzle at the top. Any suggestions?
@Shawterty
5 ай бұрын
Same issue, did anyone ever figure it out?
@emilialocke7354
8 ай бұрын
Thankyou, but wordy.
@Roland6596
Жыл бұрын
It says in the title " How to refill....." but in the actual video, it only shows how to fill
@BabbyGuavaandfriends
Жыл бұрын
This is being pedantic. The tank is empty. Filling or refilling works.
@jeffgoode3411
Жыл бұрын
I was wondering the same thing. At what point can I "refill" to get rid of the little extra I have in each of the bottles after the initial fill. I suppose I could try after some ink has gone down some (it already did with the first fill) but would love to know if there is a particular line on the tank to consider or not.
@allisterfrost
Жыл бұрын
@@jeffgoode3411 You can refill whenever you wish. I usually wait until the tank is around half full, then top-up. That way the tanks never run dry and I can also check I have sufficient ink left in the bottles for the next refill (or buy more as needed)
@saintannechurch8263
Жыл бұрын
Don't let it go empty, when it gets to the bottom line, refill. Myself I was confused with instructions. It seems the power is not supposed to be ON when originally filling, but then the power was on for this instrcuction.
Пікірлер: 73