Man, I can't wait to see No Secrets getting put together.
@brocktorning1890
4 жыл бұрын
Came from watching Adam Lz’s Barra swapped gt350 rocketship to this. Today is a good day!
@CorysGarage
4 жыл бұрын
Same lol
@tomwilliams6401
4 жыл бұрын
LZ, Sammit, Motive, can’t get any better
@slowrps13
4 жыл бұрын
Such an underrated channel.
@RadDadisRad
4 жыл бұрын
Produced Factory does some AMAZING work!! I’ve seen a lot of Australian content with their craftsmanship.
@VS666
4 жыл бұрын
absolutely incredible! I recall doing a brake refurb at home and I kept walking out to the garage to admire them. this is next level
@littlejohn-pi7kk
4 жыл бұрын
Calipers turned out mint. I’m poor so rattle can for me.
@dancearoundtheworld5360
4 жыл бұрын
i only got money for hp, you dont need neck braking brakes
@Al-of3zp
4 жыл бұрын
Looked like more of a gold to me.
@seanissomething
4 жыл бұрын
@@Al-of3zp looolllll
@gav240z
4 жыл бұрын
I had my FD Calipers powder coated, but removed the pistons and seals before, I was told the oven might melt the seals so it was best to replace the seals. I note in the end he mentions replacing the seals and pistons (more cost) but never mentioned removing them at the start. They look lovely, but big dollars for these calipers..and I can see why it cost so much to do.
@mrnicktoyou
4 жыл бұрын
I bought some second hand 4 piston callipers and rotors front and rear for 1 grand, so I can't imagine spending double that to have them powder coated. Might be worth just doing it myself at home though.
@RadDadisRad
4 жыл бұрын
It won’t cost that much to have them powder coated.
@mrnicktoyou
4 жыл бұрын
@@RadDadisRad how much will it cost?
@krispykruzer
4 жыл бұрын
The job in this video is concourse grade, if you do most of the work, powder coating is pretty cheap. 20 years ago, when no one about powder coating, I got a set of 4 rims done for $150
@flinchy952
4 жыл бұрын
you could do all of the prep work yourself, strip and mask and all that, shave off 60-75% off the labour cost
@DBuilds
4 жыл бұрын
I started looking Into doing this for my r33 GTR here In the states. The adapter kit itself is what threw me completely off this type of project. $5k for a adapter kit is absolutely ridiculous. Factor in the price of the calipers used is about $2k. New rotors about another $1.2k. powder coating like this as you said is about $2k that's $10.2k total. Absurd really when you can get a full set from any big brake manufacturer for much cheaper. I'm just gonna refurb my r33 brembos and use better rotors and call it a day.
@Reaper-cq4sw
3 жыл бұрын
powder coating cost 2K TF? I just polish it then
@nocrustracing
4 жыл бұрын
They look sensational.
@zappy7393
4 жыл бұрын
Looks bloody awesome. Love the attn to detail. Pity most of the powder coating places I went to either said they didn't want to do it, the poser coat wouldn't hold up to the temps or they just wouldnt take the time to do such a good job. Ended up doing it myself for similar results (due to prep and time taken).
@fendel_
4 жыл бұрын
Wow, those calipers really look amazing! That is some great workmanship!
@caveman4tw
4 жыл бұрын
Actually, painting and anodizing is preferred for calipers because powdercoating holds heat in better, thus is more detrimental for heat dissipation. Look at Brembo/AP, Alcon, or Stoptech's top tier motorsport caliper finishes. Also, probably shouldn't have powdercoated the pad springs as they flex, and PC does not like to flex at all - it will crack eventually.
@RadDadisRad
4 жыл бұрын
Yeah I was thinking the same thing. Will definitely flake away off the tension springs. I’ve seen color changing calipers, they help put crews identify caliper temps and determine if a brake change is needed.
@matthewcasey5059
4 жыл бұрын
Lol I am watching this taking notes and writing down sites to get work done so when the R34 becomes legal here in the states in 2024 I know who to get ahold of and where to send things so I can make my ER34 sedan the way I want! This is the kind of content any Skyline fan world round needs to watch to get better insight about things that can and should be expected when working on these potential monsters.
@JackScooter17
4 жыл бұрын
why doesn't every episode have like 250k views man this is so good
@janeblogs324
4 жыл бұрын
5:50 it doesn't cure in the oven, it bakes. The plastic pellots melt into a polymer
@wrx2hot4u
4 жыл бұрын
I literally did just this. Also i sat at my dremel station and spent about 16hrs getting rid of the bad casting. Results are amazing tho, finish with custom DNA paint and 2K clear. Only reason i didnt go powder was the wait time on getting the colour i wanted from states. It is more durable but i dont drive mine alot and the paint after 1.5 is still as good as it was when it first went on.
@Sun-ut9gr
4 жыл бұрын
Calipers look amazing! This car is going to be a beast for sure. Don't you need a mask when powder coating though? Guy does great work so it'd be a shame if he got the powder lung 🤔😂😅
@Archfile375
4 жыл бұрын
I had the same thought
@RadDadisRad
4 жыл бұрын
No, not much powder comes out of the gun and also using a down draft booth or a cross ventilations fan is generally used to prevent powder from building up on the material and mounding and also decrease dust.
@BlakePries
4 жыл бұрын
Amazing job, but one question. Is there a reason not to put the Brembo stickers on in between the color and clear coats? Most videos I've seen of refinishing calipers have the sticker placed under the clear coat so it doesn't come off.
@TheSruediger1
4 жыл бұрын
Finally powder coating getting the recognition it deserves i was once a powdercoater and I still get people arguing that painting wheels is better
@2fast2nick
3 жыл бұрын
This thing is going to be so freaking clean
@tgracing5532
4 жыл бұрын
Wow what a result. This guys is going to be booked out moving forward
@autopassion27
4 жыл бұрын
They look so smooth and the gold colour is beautiful! 👌
@serdarerdurul8619
4 жыл бұрын
Looks good Andrew, I went through same process building my ones. For the stickers don’t buy the from acromann. I got mine from there and was a little disappointed. Stick to a local to make it for you.
@ejm3381
4 жыл бұрын
I was thinking of powder coating some stock wheels so this has been a great insight.
@michaelgleeson1198
4 жыл бұрын
That's craftsmanship those brake calipers are stunning Produced Factory awesome work
@james9032
4 жыл бұрын
So beautiful now. Awesome watching the build man.
@buddahae86
4 жыл бұрын
Incredible workmanship.
@legendarykingnz1908
4 жыл бұрын
Massive outcome. Beautiful work
@janeblogs324
4 жыл бұрын
Get them cryo treated for $100 and then ceramic coated for $100. Then they will have much better heat dissipation Then they would actually be better. What you did did not improve them at all. That smoother finish reduces heat dissipation
@bloodzkull
3 жыл бұрын
I could be wrong of course but how would ceramic coating help with heat dissipation? Wouldn't it have the opposite effect
@Borrie131
4 жыл бұрын
One up for Tommy! Well done!
@michaelokeeffe490
4 жыл бұрын
Powder coat DOES need primer not 100% needed but does make a much better finish
@simongoode7812
4 жыл бұрын
This was great to watch. Isn't it much lighter gold than other Nissan gold Brembos? Is that normal or did you choose that colour on purpose? 🤔 I'm not overly keen it being so light but the prep & finish are amazing guys 😀👍 Keep up the great progress.
@camver100
4 жыл бұрын
Bit of a random question boys: have you ever thought about putting Some of the oiling/ catch can/ fueling tech to building a platform like the N54. They are dirt cheap nowadays and the stock opened deck block makes 700hp all day - who knows what that would be with inserts and some other RB basics. Would pull in a pretty big world wide audience - but I know it’s a bit left of field compared to the rb.
@doublehelix109
4 жыл бұрын
YUSSS old intro! god its aweseome!
@Al-of3zp
4 жыл бұрын
Great plug for Tommy.
@simonstillborn4951
2 жыл бұрын
Show car or circuit car? Immaculate finish 👌
@eikots
4 жыл бұрын
Stokie's Automotive Spares in Kirrawee offers a very similar service
@sailorgang86
4 жыл бұрын
Looks freakin amazing. I need mine done in Purple
@alternativeperception6949
4 жыл бұрын
Every time I see a new video on this Skyline I get a little twitch in my Bastard reproduction module
@HazeyAuto
4 жыл бұрын
I hope they cop a ceramic coating to keep them looking fresh and makes them easy to clean. Definitely looks good. Only concern I had was the lack of PPE during some parts of the process. But hey, your lungs.
@RadDadisRad
4 жыл бұрын
Respirator isn’t required if you have sufficient exhaust and fresh air.
@HazeyAuto
4 жыл бұрын
Be that as it may or may not, the operator was wearing a respirator while coating the lines and clear coating the calipers- in the exact same space he was bare faced while doing the base coat on the calipers. 66.6% protected from airborne particles isn’t 100%. But I repeat- your lungs.
@kemosabe8313
4 жыл бұрын
Damn! Those look good. I need a set 😍
@TheStickygoo
4 жыл бұрын
How good are those mate...wicked.
@lukek624
4 жыл бұрын
Cost of the job is long forgotten when the quality product remains for years to come
@ZWortek
4 жыл бұрын
Holy shit! They look incredible!
@lostwill86
4 жыл бұрын
Fantastic job. But I think I'm probably old school when I say brembos should be red
@R32Danny
4 жыл бұрын
I love powder coating if I could I would powder coat everything. I only have small setup good for small parts
@joshdobson2737
4 жыл бұрын
Have you started thinking of a debut event for project no secrets or is it still too far out to predict?!?
@mitch91318
2 жыл бұрын
Love the work but for anyone else doing this removing the anodizing on the calipers which is under the paint and particularly in the bores is a horrible idea. Aluminum brake calipers have been anodized (since a particular vehicle brake failure over 20 years ago) in the bores to harden the surface to allow the pistons not to dig into the walls of the aluminum surface, it adds hardness to the surface. It is especially important in vehicles with ABS or traction control that uses the ABS pulsations to control traction. If no ABS not as important, manufacturers do things for a reason, usually failure modes.
@maxime_vhw
3 жыл бұрын
When u say media blasted. What type do you mean specificly? Sandblasted? Planning a similar thing with my trackbike rebuild
@puresxxx
4 жыл бұрын
Good job and good work
@krispykruzer
4 жыл бұрын
$2500 for refinishing brake calipers ...that's a lot of moolah
@MotiveVideo
4 жыл бұрын
20 seals have to be removed and replaced. 20 hours labour and the powder isnt cheap when its this quality.
@phils51
4 жыл бұрын
Good work is not cheap and cheap work is not good
@igvtec
4 жыл бұрын
As he said new they would be a lot more and brembos eccetera is not cheap brand new. Sure you can be cheap just grab some breaks off a wreck and then slap them on if you so wish but in doing so you could have some problems when it comes to breaking as you do not know the history of them and obviously they are one of the most abused parts on a car. I rather spend the time and money on peace of mind knowing my brakes are going to pull me up at the end of the dragstrip to save myself and my car which I would of obviously spent more on then getting the brakes done.
@Leaptab
4 жыл бұрын
Plus the cost of the R35 calipers, shit you are more than half way to the cost of my Alcon 6 pots on my R34 GTR
@Acob84
3 жыл бұрын
What color did you choose, it looks similar to the bmw m ccb just more glossy.
@meansurf
4 жыл бұрын
Great vid again 🤙
@pandacles6635
4 жыл бұрын
When its stripped down to raw there dosnt appear to be any manufacturer markings so what would the difference be between r35 n say hsv or amg or would it all be the same caliper just different paint jobs
@MotiveVideo
4 жыл бұрын
Just has Brembo markings. Nissan. Markings are stickers
@jarsky
4 жыл бұрын
It's absolutely ridiculous how much a second hand pair of R35 calipers cost. You can get a brand new complete big brake kit with 2 piece rotors from Ceika for cheaper, and you can get it in the anodized color you want. Still to much for my street skyline, I just powder coated and rebuilt my original calipers.
@TechToolsMichael
4 жыл бұрын
Nice
@gafrers
4 жыл бұрын
2500 AUD only for a color change seems very steep; especially given the real refurbishing has to be done still. I don't doubt about the quality and time spent. I don't know about the thermal properties of power coating against Hart-coat or similar hard coatings and i'm curios to see how it holds in time.
@MotiveVideo
4 жыл бұрын
Did you look at the condition they arrived in? And the title of the video. Refurbishment
@gafrers
4 жыл бұрын
@@MotiveVideo Yes i did and the seals and other parts of the hydraulic system haven't been touched. The results look great, i'm not saying otherwise.
@NuriiG
4 жыл бұрын
Big job !!
@tepidtuna7450
4 жыл бұрын
Brilliant job. Yikes on the price. It is what it is.
@MotiveVideo
4 жыл бұрын
We went all in on these to make them perfect. They are elite show car quality finish. Dont have to go that far, we just wanted to show how much work is involved to go that serious,
@tepidtuna7450
4 жыл бұрын
@@MotiveVideo Perfect they are!
@jeffsymons7084
4 жыл бұрын
@@MotiveVideo What direction are you going with this car now? Not hating or anything, it's all great content. But I thought this was going to be a track car? Do you plan to use it more as a display/promotional car?
@vd8491
Жыл бұрын
Which shop is this?
@mikedaly4198
4 жыл бұрын
Produced Factory? What happened to Produced Auto?
@CleetusDaily
4 жыл бұрын
The guy should probably wear a mask when powder coating right !?
@petkokrushev3840
4 жыл бұрын
he is alone, so there is no danger of getting Covid :D
@brimech73
4 жыл бұрын
@@petkokrushev3840 😂
@emmanuelirizarry5302
4 жыл бұрын
No mask for powder coating...
@petkokrushev3840
4 жыл бұрын
2500 dollars for powder coating is a bit excessive...
@tturi2
4 жыл бұрын
Brembo "no sectretz" stickers you mean
@thomaskunz8029
4 жыл бұрын
2.5 thousand dollars to powder coat x4 calipers... WTFFF
@tomm-_-16
4 жыл бұрын
If you are reading this god bless you and have a wonderful day and stay safe ❤️🥰
@honda8192
4 жыл бұрын
Calipers look good but why the fuck is that guy not wearing a respirator when powdercoating. I do my own powdercoating and sandblasting for my builds and even with my expensive 3M respirator I can still smell the powder. He’s going to have very bad lung damage.
@sats7819
4 жыл бұрын
2500 dollars? You sure?
@DamonDupriez
4 жыл бұрын
Wonder how much breathing in powder shortens your life....
@ffaspector
4 жыл бұрын
What kind of shitty powder coaters does he use?
@captainbarge
4 жыл бұрын
2.5k for painting? Meh
@MehMehMeh757
4 жыл бұрын
covid tax lol
@flurrymcflufffluff
4 жыл бұрын
I'm guessing it's Australian dollars. Awesome result if you have the money to spent though.
@MehMehMeh757
4 жыл бұрын
@@flurrymcflufffluff i have the money but i also have a thought process and 2.5k is way over priced my friend, imo
@MotiveVideo
4 жыл бұрын
Except its not paint and there is 20 hours labour in it plus powder. Also removing and replacing the piston seals.
@MafiaboysWorld
4 жыл бұрын
People don't realise masking up things like that take time. I do refurbishing for my business and a set of wheels can take up a whole day or even more to mask up depending on spoke design. Even if you charge a mates rate of only $25/hr, that's $200 for an 8hr day, just on masking. 🤷 Most companies here charge triple that for labour as a cheap rate.
@MrIrish1
4 жыл бұрын
He prob done it for half price because of the video
@MotiveVideo
4 жыл бұрын
Media and Advertising isn't free. Jet Multimedia is a production company with overheads like any business.
@MrIrish1
4 жыл бұрын
@@MotiveVideo of course 👍
@4litrespoolyboi206
4 жыл бұрын
🤤🤤🤤
@Sick_Boy.
4 жыл бұрын
I’d pass on the ‘Brembo’ sticker. ‘Nissan’ instead.
@gilsondia
4 жыл бұрын
WHAT A BULLSHIT SENDING CALIPERS...THAT REALY MAKE U GO FASTER OR BRAKE MUCH QUICKER...U CAR GETS REALLY LIGHT AFTER THAT
Пікірлер: 120