Haven’t tried it, but I think letting the sun heat up the windshield on a hot day might be an easy way to remove the tape. Plus, the sun will evenly heat the entire windshield.
@mikelbrenn111
2 жыл бұрын
The heat gun will only heat up the spot really fast and might cause the windshield to crack.
@cindyhealy3707
Жыл бұрын
Thank you! Worked perfectly for my wreath hangers on a glass front door.
@garykwan360
5 жыл бұрын
Can you demonstrate how to get rid of the bubbles in between the adhesive and the glass when mounting?
@fabiandee8178
4 жыл бұрын
i think i'd need to be careful when using a heat gun as it puts out so much more heat, it might crack the glass?
@diakmef
9 ай бұрын
Thank you you saved my very expensive polarized windshield and it came out great with the hair dryer
@AngeloWelihindha
2 жыл бұрын
This worked brilliantly! Thank you so much!
@CharlesStawell
10 ай бұрын
Did it this method... it worked 👍 - I was a bit worried about breaking the glass so I enabled the heated windscreen 1st, waited for that to go off, then heated with hair dryer in loose circles around the 3m tape.... I found pulling with a constant force like a slow oozy drip worked a treat rather than yanking / jerking it off... Cheers 🍻
@jinlee8644
3 жыл бұрын
Thanks for your video! Is it the same procedure if removing adhesive tape from the mirror in the bathroom? Do u think any possible to damage the mirror?
@mazenbira1776
4 жыл бұрын
What to do if you need to relocate it would the stick still working somewhere else
@cayrick
3 ай бұрын
Great video Danny! Thanks so much.
@hampdix
2 ай бұрын
The mount has been in the sun, so how will a heat gun help?
@yon_ko5711
2 жыл бұрын
Thank you, What about if your front windshield is tinted, is there another way to removing the tape?
@rushrule1
3 жыл бұрын
This is what YT is for, thank you!
@omardgardiner2225
Жыл бұрын
I almost want to say I love you for this tip 🤣🤣🤣 Thanks man
@MrKen-wy5dk
5 жыл бұрын
Perfect! Thank you!
@bgregg55
4 жыл бұрын
just what I needed to know. thx
@Peacecommunity777
3 жыл бұрын
Perfect man.. 10/10 for you... thanks
@AmbroseLiu
2 жыл бұрын
Would the adhesive still work again after? I installed my rear dash cam upside down. I doesn't really matter but if it's simple enough, I might try to heat it up, flip it, and stick it back on.
@GloveBunniesVideos
2 жыл бұрын
Very helpful, thanks!
@GoymonTV
4 жыл бұрын
100% effective when using heatgun 30 seconds heat to the windshield, thumps up to you
@richeyrich6855
4 ай бұрын
Great Job with the blow dryer!
@ChrisBuss77
3 жыл бұрын
Your video Rocks! :D
@roughjc
2 жыл бұрын
Thank you so much for your effort. Great demonstration!
@jamesg4730
2 жыл бұрын
Thank you! What do you use to clean the residue? Just glass cleaner? I have tint so I use ammonia free but was wondering if anything else worked better
@tianag8513
2 жыл бұрын
Isopropyl alcohol
@judyromero2174
Жыл бұрын
I wonder if these methods would work on the temporary tape used when replacing my windshield. I left it on too long! Help!
@delovelyday430
Жыл бұрын
Thank you.
@TamaSifaga
2 жыл бұрын
what tape to use to re mount dash cam to another car ?
@clayton4115
2 жыл бұрын
thanks that did the trick
@ricklangston8895
2 жыл бұрын
The heat gun did the trick in about 60 seconds. Thanks.
@bualmaz5805
4 жыл бұрын
I will try it today.
@rubygrudzinskas9954
2 жыл бұрын
Legend thank you
@marcidin6014
3 жыл бұрын
Does it work on the wall???
@user-xi1to4ph6s
3 жыл бұрын
how to remove residue?
@dimbulb6443
4 жыл бұрын
People should be extra careful when using adhesive mounts on tinted windows. Tints are, much like the 3M tape, a film. Pulling off a device glued with 3M tape can easily rip the tint film.
@DASHOTO
4 жыл бұрын
Definitely! In our experience, as long as the adhesive has been heated up, the camera adhesive will always give up before window tint does!
@jyearr6744
4 жыл бұрын
@Closed It's actually becoming pretty common as it reduces glare, UV light, and heat into the vehicle. Blocking that UV on all windows including the windshield will also keep your interior in great shape. Also some people mount cams on the rear window where tint may be as well. Cheers
@White_Night_Demon
3 жыл бұрын
Maybe they want it dark as black so no one can see inside the car? So it looks cool from the outside....
@myusrn
4 жыл бұрын
i wonder if the everyday dental floss or old credit / loyalty card approach outlined in this video for 3m adhesive phone grips [ kzitem.info/news/bejne/mKmZzKKHgoyIjZg ] would also work on these 3m adhesive to glass application scenarios? the other video suggests that the adhesive is engineered to provide pull strength but not sheer strength which is a design point you can use to make removal easy.
@mets23q
Жыл бұрын
Paint scraper works the best
@leef3167
2 жыл бұрын
Thanks a lot for your video. If I want to buy a heat gun, will anyone will do?
@ERNOZZ1
2 жыл бұрын
Try a hair dryer!
@joetan4125
2 жыл бұрын
Be careful if you have rock chip nearby cuz it gonna crack your windshield especially doing it in the cold weather.
@Hopija
3 жыл бұрын
Lol this actually work
@brettheath3182
11 ай бұрын
i dont have any hair
@be_luna
4 жыл бұрын
Thanks lmao
@m_a_s6069
9 ай бұрын
God forbid you remove it using any of the ways 3M suggests. Better to risk cracking a windshield. And what if there is already a crack or a ding in the windshield?
Пікірлер: 50