Hiya C C. Are you talking about the part inside the door? Removing the handle as I showed doesn't effect the inner part. Was it fine before the outer handle was removed? Did you refit the outer black gasket at the back of the handle. That might cause looseness if not fitted. Cheers.
@aaronpederson7910
6 жыл бұрын
That's it?! I'm wrapping my car I was expecting a headache lol
@CC-xy5cz
5 жыл бұрын
Thank you sir. I recently did this but now the backing plate where you insert the door handle is very loose. I have no clue how to get it to stay in a fixed position.
@yetidh9
6 жыл бұрын
Is it the same procedure for the other side? The drivers' side has a lock barrel.
@cordellsmith4028
6 жыл бұрын
yetidh9 yes it's even easier without the lock barrel. Good luck my friend. 😊
@aishx1740
4 жыл бұрын
Omg my local indy wanted half an hour labour to replace a door handle at the cost of £30. HOW DOES THIS TAKE HALF AN HOUR! thank you ill do it myself. Saved me 30 pounds
@AdrianJayeOnline
4 жыл бұрын
BMW would have charged you an hours worth of work BTW, an indy has to charge something right a 2 minute job, how much would you like them to charge you, a fiver ? 30minutes work is MINIMUM, it takes at least 15 minutes to get your car in, ready and all the parts good to go, can't afford 30 pounds I suggest your driving the wrong car
@ksiazecamosc
5 жыл бұрын
how can i change a led in handle ? Do you have a film with that operation ?
@cordellsmith4028
5 жыл бұрын
Hiya. Unfortunately I didn't need to remove the LED for the job I had to do. I'm guessing it's a take off the interior trim to gain access to the doors looking mechanism and hoping it's a plug in loom into take? Good luck my friend and keep me posted how you got on.
@northwestcustoms5305
7 жыл бұрын
I love u man 😊 thank u for this
@cordellsmith4028
7 жыл бұрын
North West Customs thank you for taking the time to comment. Yes it's simple.. If I could do it one handed, it must be!! 😀
@APTechs
6 жыл бұрын
Can the door handle light be replaced?
@cordellsmith4028
6 жыл бұрын
Fitness 4U thank you for your comment. I didn't trace the two wires from the light into the door. I'm sure bmw would design it to be replace should a LED bulb fail. Would a call to a Bmw dealer parts department answer that one. Good luck, would you message me back how you get on. Cheers.
@technik333
7 жыл бұрын
I'm having troubles to re-install the front door handle, it does not seem to catch it. How difficult is it to pull the catch forward? Does it require a lot of force?
@cordellsmith4028
7 жыл бұрын
Ninja. Hi sorry I've just spotted your comment. I'm guessing after two weeks you've sorted it? The handle is simple to reinstall once you've pulled the lever to the up postion.
@valant963
6 жыл бұрын
What of the LEDs fell in the door?
@cordellsmith4028
6 жыл бұрын
Valant Hiya KZitem. As I seem to remember, it was a long while ago. The two wires are short and connected the inner handle machanism. So with the help of twisers or thin long nosed pliers you should be able to retrieve the LED. Thank you.
@rvndyv3545
6 жыл бұрын
Those wheels tho
@vision8579
6 жыл бұрын
Wow, BMW wants to change me $175 to do this on 1 door.
@cordellsmith4028
6 жыл бұрын
Rob Gunther hiya Rob thankyou for the comment. That's a crazy figure. With the knowledge from my video and the money you've saved, your one smart cookie. Happy motoring my friend. 😊
@AdrianJayeOnline
4 жыл бұрын
that is 1 hour work time, that is a bare minimum that BMW would charge you, don't like that, don't take it to a dealer, or maybe don't drive a BMW
Пікірлер: 21