Utilised this method today and it worked an absolute treat, thanks Alan!
@PaweMusia
2 жыл бұрын
Great tip Alan! when i did mine downpipe on my Mk3 Mondeo couple years back, nuts on the catalytic converter end were so rotted that they looked like 2 layers of tin foin wrapped around the stud. luckily threads were saveable ;)
@josephhalwagy6435
2 жыл бұрын
Great seeing you back Alan and thank you for sharing
@mikeruddy7675
Ай бұрын
Just had an exhaust flange stud snap on me. Had very limited access but a reciprocating saw worked a charm. Cut and a few light taps and it was out. Thank you so much.
@alan4x
Ай бұрын
excellent..nice when things work out
@danielgreenbaum8875
2 жыл бұрын
Ive always drilled them out but a quick way of getting them always good to learn new tricks and have other options only thing I think would be abit more difficult is trying to grind stub at top getting grinder in but still a very good idea
@dangerdavefreestyle
Жыл бұрын
I just got an arc welder. Makes me want to give that quick zap, a bit of a mend and a bit of tidying up. Love the strategy.
@patkelly7999
2 жыл бұрын
Great job Alan, every day is a learning day, Thank You👌👍
@kookylook2071
2 ай бұрын
Inductor heater, air chisel. Quick and neat no flange damage.
@alan4x
2 ай бұрын
😊
@Litesnip2022
2 жыл бұрын
Cut the stud off and then drill the rest out. Would of looked cleaner.
@AlexGnok
2 жыл бұрын
takes ages though
@Daedalus_UK
2 жыл бұрын
@@AlexGnok only if you have cheap drill bits
@Daedalus_UK
2 жыл бұрын
use cobalt
@AlexGnok
2 жыл бұрын
@@Daedalus_UK yeah probably you are right. I don't remember what drill bits I was using, but I was drilling out 4 studs from the dpf filter on my focus and it took me half a day to do it
@Daedalus_UK
2 жыл бұрын
@@AlexGnok probably HSS titanium coated which are shit. They polish metal not cut. Cobalt for the win.
@mikeberry304
2 жыл бұрын
Nice job Alan , I usually cut off the thread , and drill through the stud a couple of times and bolt it back together, at least no damage to catalytic converter either way 👍
@hoojchoons2258
2 жыл бұрын
Snap, still a twat of a job!
@jedigeekbiker
Жыл бұрын
id have done same
@justadreamin1004
Жыл бұрын
Wouldn't that cause an exhaust leak the way he did it---at least eventually?
@jedigeekbiker
Жыл бұрын
@@justadreamin1004 that part is seperate from the exhaust gasket so actually would be ok
@N269
Жыл бұрын
Exactly Mike. By cutting a notch (slicing the wing) will lead to other issues. I'd cut & drill and replace the stud with a bolt and an Aerotight nut. Might as well do same on the other stud.
@lilibethdoherty295
Жыл бұрын
This is why High temperature paint is so great, I coat all my cars exhaust parts with it and the metal will not absorb moisture. I have been doing this for decades and have none of these problems!
@vintageallday2771
Жыл бұрын
What type of paint?
@user-yj4ld9mg2b
9 ай бұрын
Three of four wasn't too bad to change. The Fourth one i put the 7/16-14 on and tried to clean up the threads because it was stuck. But the threads weren't cleaning up either. So.. it's had various capillary action sprays on it awhile..a couple weeks. The other day a mechanic friend suggested transmission fluid for something else. And I remembered brake fluid and transmission fluid mixed.. and I poured some on and hour ago and it's going to be out in a few minutes. It's loose now. I just have to finish up. But it's a big deal to have air leaks before the oxygen sensor so I wanted to start with good bolts and be able to snug it down good.
@SM-ch2ny
11 ай бұрын
Thank you. this method over anything you can get cutting tools in and around the exhaust very easily, but trying to drill it out like some people say “would be better” but like your saying in the video if your gonna do that you need to remove the hole exhaust bit to make that work effectively and/or pray your drill actually fits in that specific area !
@callumcurtis15
2 жыл бұрын
If you have a acetylene torch I would deffinatly say heating around the stud then one nice whack usualy does it for me .
@jamesporter4749
2 ай бұрын
That's what I did with a Vauxhall corsa exhaust I changed the other week, heating up the surrounding area around the stud until blood red and used my spring punch on the two studs. They flew out
@danieldryden4246
2 жыл бұрын
OMG! I wish you had posted this video 2 weeks ago! I had the same issue trying to remove the dpf from my 2010 2.0 tdci S-Max. I opted to cut the studs flush with the flange and then drill them out… It worked, but it took me the best part of 4 hours to do 2 flanges. 🤦♂️
@Umski
9 ай бұрын
I fear I am taking on a similar problem - I spent 2 hours drilling and have only cut about 2mm so far - busted several smaller drill bits in the process too 🤦♂
@Country_Nasty
2 ай бұрын
@@Umskigotta buy the best drill bits. Cheap ones will break your heart half way into a hole
@Umski
2 ай бұрын
@@Country_Nasty 😄 yeah I went for a cobalt single of the correct size in the end - it was like a hot knife through butter - have had similar experiences with masonry drills too 😬
@gabeo9474
8 ай бұрын
This guy is awesome!
@ericjumpelfeaturingjohnnyj4135
5 ай бұрын
Excellent work! About to go give it a try right now. Both of my studs are gone and require this same surgery. I tried drilling the stud remnant out, but I think the stud is only slightly softer than my drill bit.
@idunknown7591
6 ай бұрын
I'll be damned... I have been trying to get mine out on my 98 K2500 4x4 for two solid days. Then I decided to go to KZitem University. and there you were Alan. As soon as you said cut a relief cut in the flange, I knew that that was the trick. Going outside right now and going to get them both out. Will update in a few.
@kevinpalmer7452
2 жыл бұрын
That’s how I do them Allen like you say quickest and easiest way👍
@sandy7m
23 күн бұрын
Spilned studs on an exhaust assembly flange. What moron tbought that was a good idea. You had a great solution to the problem which took the issue back to what shohld have been their "day one" nut and bolt
@alan4x
18 күн бұрын
yes nuts and bolts would be much better but I guess its cheaper to produce the studs
@BesprovolkiSvias
9 ай бұрын
Here, in the US of A, we use "PB Blaster" to soak the rust before we try these kind of tasks. It is a rust penetrant, works wonders, seeps through seemingly impossibly narrow spaces (microscopic), makes a path for itself by dissolving rust and seeping further.
@user-ye9sn5hp6c
7 ай бұрын
I sprayed with PB blaster 3 days prior to the job snapped one side with impact snapped other side with hand tools🤣
@miguelp4812
6 ай бұрын
Apparently you don't watch Project Farm youtube channel? PBlaster doesnt work nearly as well as liquid wrench or seafoam. You are welcome.
@andrewcheatle4691
5 ай бұрын
Or homemade ATF/Acetone 50/50mix, works better than any commercial product. Just don't get it in your eyes
@BesprovolkiSvias
5 ай бұрын
"Commercial products" cannot be possibly "worse" because those people are not dumb, as follows: if you know about ATF / Acetone mix, this follows that they (them) have known it for centuries. Conspiracy Theory Scientists are the best, they tell us that allmighty "they ("them") have been hiding the best facts from humanity for millions of years. Alien Tech?
@andybramwell9179
9 ай бұрын
Did this today...I tried drilling out but it was woukd have taken hours. I cut a groove with the grinder. Job done. Than you so much.
@makeitpay8241
7 ай бұрын
you need better drill bits not junk high speed steel those are only for mild steel not hardened studs.
@stephenshippam9374
2 жыл бұрын
Hi Alan, great job well done, all ways enjoy your video's kind regards to you
@colinbryan2738
2 ай бұрын
BMW Z4 2.5 exhaust studs corrode away and are awful to get out. I cut a slot like you did but space is tight to cut the upper one. Air hammer on them and managed to get them out. Killed an exhaust sensor from all the hammering so had to replace that as well. Stainless bolts fitted to the exhaust flange so they won't rot away again. Getting the broken exhaust sensor out was another pain sensor sockets just spun on the sensor flats ended up chiselling off the top of the sensor to get a reverse twist extractor socket on what was left and a short breaker bar to get it out. Chased the thread out then fitted the replacement.
@gmoney9588
2 жыл бұрын
Not in our wildest dreams would we be able to retread a stud that had deteriorated to a smaller size and expect it to hold up under the stress of torque and heat and last for any length of time . Replacement was the only option . Although splined studs are not always easy to remove , even when heat is applied , it’s still easier than a threaded stud for removal . I’ve had success on thinner flanges with heat , and I don’t even own acetylene torches but used MAP gas . After heating until it smokes heavily , a socket on the stud end a C press on the other end to produce tension , followed by some concentrated tapping to shock the stud loose . Such as removing a ball joint , readjust tension when tapping and introducing shock to loosen the stud until the splines back out . Before beginning the removal process however , I will try cleaning away as much rust as possible and apply a penetrating oil in hopes that it will lubricate the splines and free up the rust bond as best as possible . You will always want to clean away as much rust from the head of the stud and threads where they go through the hole in the flange so there is the minimal of rust bond for a successful extraction of the stud . Yes , cutting the flange to relieve tension and aid extraction works but I really do try to avoid cutting unless I’ve no choice . That is a healthy sized flange and should be quite strong but heat from the catalytic converter will eventually cause it to bend . Respecting that this is a quick fix when time is of the essence and the exhaust has only a limited time left in this world before your MOT Lads condemn it to the junk pile , it’s what gets the job done . I speak from personal ownership as though it’s got to last twenty years or so since I personally keep a vehicle an eternity as it is anyway . While everyone has their methods , I will say that cutting and relieving will absolutely get the old stud out . Re-welding is not likely to last if that is a cast steel flange . The heat cycles from the exhaust will eventually weaken it . A body can try heat as you’ve suggested and pressing it out but time is always the deciding factor . You’ve got to keep them rolling and quickly , granted . Just hope the MOT lads haven’t a difference with this plan of attack . I should think not or you wouldn’t take this route . Well , to each his own but I will say , yes , this will definitely work . This thick flange will go a while in service with this repair for at least long enough before mileage has this vehicle either parted out or on its way to the furnace . The taxis rack up mileage so it’s a question of whether mileage dictates removal from service or wear and tear does first . Anyway , under the circumstances , this is a quick and acceptable repair for the needs . If all else fails , miss Monica’s input is always welcome ❤️
@trboj
4 ай бұрын
The C press on the other end is what i would due
@gmoney9588
4 ай бұрын
@@trboj Yes , I’ve found that a C press used for ball joints and universal joints to be useful on larger bolts . Smaller bolts , I’d use a press clamp similar to a C press in action . Yes , it’s the method of pressing out a splined fastener that we must use . Shocking the faster out whether on the flange surface or the fastener itself with a hammer or air hammer and increasing pressure of the press will eventually get it done .
@nickaxe771
8 ай бұрын
Great Idea....thanks mate.
@CLIFTYPOPS
2 жыл бұрын
Alan how many miles can the 2 litre duratec engine and its gearbox go before they start going bad?
@frednetherlands887
2 жыл бұрын
Good tip. Thank you.
@benws8246
2 жыл бұрын
I do love a good flange video. 😁
@williamkelly6034
2 ай бұрын
Good show! I've got to take apart my exhaust to get to the O2 sensor. Exactly the solution that I needed! Many thanks!
@alan4x
2 ай бұрын
Glad it helped
@garybrown5500
2 жыл бұрын
Top tip Alan. Got to laugh at the people getting all sensitive about the slit left in the exhaust. It can easily be welded! As for drilling the stud well they'd be there a long time. Those studs get bloody hard with all the heat cycles!
@chrisnewell-7758
2 жыл бұрын
cobalt drill, lube and slow speed lol
@garybrown5500
2 жыл бұрын
@@chrisnewell-7758 Post up a video show us! LOL
@N269
Жыл бұрын
So, cut a groove/slit, bash the sucker out, can't use a new stud, still need a bolt... oh, yeah, and waste time welding?! Just drill the sucker and use a bolt. What a waste of time! Might have tried a 2-prong puller as a pusher (if it was small enuff to fit in there).
@lancedenney2408
8 ай бұрын
These are super strong heat-treated bolts! use a small gear puller and patience setting up the 2 arms!
@muffs55mercury61
4 ай бұрын
Good job. My grinder has done many things for me thru the years. When one goes bad I buy another.
@joe10toes
4 ай бұрын
I love google subtitles..."here we have a mark free Ford mondeo" 😂😂😂
@philipnewton7942
2 жыл бұрын
Allen A good way of getting out of trouble but wont it make the flange week and slacken if the bolt I thought you would fill in the flange where you cut with weld a interesting way though Phil in stoke
@jimhenderson2308
11 ай бұрын
I had the exact same thing happen and bent the flange. I'm going to do what you suggest and attempt to bend the flange back. Another way is to cut the stud off and drill a hole thru it and use a mini hack saw to cut a slot in the wall thickness left from drilling the hole. This will spare the slot in the flange.
@bobabraham5060
8 ай бұрын
Dremel tool with a grinding blade will make a much thinner slot. Might take a bit longer but it will do the job and you won’t lose as much material.
@nickaxe771
8 ай бұрын
What would a thinner slot gain....its still a slot.
@guffermeister
2 жыл бұрын
Please put the guard back on your angle grinder. I have had slitting and grinding discs let go on me before and been so thankful that I had the guard on to eject the disc debris away from me. Proper eye protection is a must. If you had an accident, you would be putting your employer in a horrible position with liability without the proper guards and basic PPE in place...
@nomaschalupas2453
Жыл бұрын
Well, it hasn’t happened to him yet, so he’s alright.
@johnsaliba5358
Жыл бұрын
@@nomaschalupas2453 I've seen a disk coming apart and being embedded in a mate's face. Gruesome and nearly cost him an eye. JUst because it has not happened yet does not mean it will not.
@Whatta33
8 ай бұрын
Get a desk job
@mcqueenfanman
2 жыл бұрын
Good job Alan!
@AcuraJ32
8 ай бұрын
Yes Sir that is how I get them out cut a slice in flange saves alot of aggravation! I subscribed to your channel
@marknucita8284
2 жыл бұрын
Evening Alan got engine malfunction came up its the P244c code having a Ford part fitted next week £515 fitted thought it was a sensor but think it might be the vaporizer. fault said exhaust temp too low for part filter regen bank 1 is that the part with pipes and nozzle in ya video? Aftermarket parts don't work as you said Regards Mark Black Mk4, you did my tracking
@drummer4hire24
Жыл бұрын
Awesome tip Mate.... worked like a charm. A bit of Penetrating oil while it was warm may have helped also.
@alan4x
Жыл бұрын
thanks drummer
@tcmits3699
2 ай бұрын
Just don't get who thought a wheel stud was a better idea than a plain nut and bolt🤔Nice job on the simple slot👍
@alan4x
2 ай бұрын
nuts and bolts would be so much easier
@brianhume4743
2 жыл бұрын
Nice one Alan,just saying from North of Newcastle 👍
@yoyo762
5 ай бұрын
If i cut a thin slot in a flange, i also cut nearly all the way through the bolt too. That way the bolt is in half and comes out with a small hammer hit.
@alan4x
5 ай бұрын
yes should do
@pakkelly
2 ай бұрын
Brilliant. Arguably the fastest method. Thank you.
@alan4x
2 ай бұрын
yeah, that was the whole point to get it done quick with no fuss, cheers
@luke2042
Жыл бұрын
Good work!
@Normandy1944
Жыл бұрын
Good idea, though I thought you were going to knock a slot big enough to hammer the stud out downward...hint, another way to accomplish this feat. Also, as far as you only went with the one cut groove, would be to put a hardened pry bar in their to pry it and relieve some of the tension of the rust on the stud and then bashing it out with less concern of bending the flange. Barring the size of the bar, you could apply pressure to the slot and give it a bash with the 3 lb maul.
@bobhunt3197
Жыл бұрын
This is great, it can be used in a few applications. Thank you.
@chasmcl42
2 жыл бұрын
Brilliant Alan.😃
@user-wu7rf6kl6j
Жыл бұрын
🧐 Each to their own. Cut and drill, brake flaring tools could have been used, splitting fork behind the bolt head, heat treatment, use some imagination. Smacking an unsupported pipe with a hammer will surely lead to more damage. Could have at least put something behind the flange to counter the impact. Sorta like "every action has an equal an opposite reaction"
@TheDaf95xf
2 жыл бұрын
Always good watching top tip Alan mondingo video 😄
@ianlaccohee7180
8 ай бұрын
I did an apprenticeship as an hgv mechanic. We used acetylene on an almost daily basis.
@paulprescott7913
2 жыл бұрын
Top tip Alan.
@DexterXxX
2 жыл бұрын
I had same thing on my DPF in galaxy mk3 2.2 2012 and i did try to knock it out without any luck so cut it short and drilled trough. But my DPF was out anyway luckly and the cat bolts were ok to put new nuts on
@theronwolf3296
2 ай бұрын
Couple of thoughts Good to see eye protection, but really angle grinder in close quarters should use ear protection as well. Use good penetrating rust solvent and leave in place for several hours. Makes a big difference.
@brianmccafferty1470
4 ай бұрын
Good job Mate!
@enoz.j3506
Жыл бұрын
I angle gring all the way through the bolt to the back,makes it so much easier,less banging & stressing parts.
@3wheeler115
2 жыл бұрын
i. Alan . I have a problem with filling my 2010 Mondeo with petrol ,the breather pipe must be blocked because the petrol keeps blowing back and takes ages to fill, have you any vlogs which incorperate any part of work on this item, i think it might be a carbon filter replacement, Help please . Mike.
@nilsthemis
6 ай бұрын
An old clip, but anyway: It's a standard pressed in stud. The best way to remove them is to press them back out. If you can't bring it to a work bench an improvised tool can be made from nuts, bolts and some scrap steel. But OK, that's a bit fiddly. In this case propane torch heating and tapping it with some heavy object backing the flange up is suggested. Banging on things without backing is not very effective and can easily cause damage.
@DevJB
2 ай бұрын
YES ! Exactly. :fist bump:
@Wildwwill
Жыл бұрын
I've noticed a smaller hammer sometimes works better to break the rust. Get that ting sound rather than a blunt thud. You can see fine particles of rust fly.
@mixedboi
Жыл бұрын
I had the same situation on my 2004 CL7 Accord, I drilled them out and hammered the splines out with a punch, it was a nasty job, 3 studs, not 2. Down + flex pipe unit.
@kenfiorentini28
2 жыл бұрын
i cut them flush , drill a dimple into it, then punch it out with a pointed tip on an air hammer
@phreekinoriginal
5 ай бұрын
ever tried placing a over sized socket on the head of the bolt and cutting the stud flush and then using a C clamp to compress it out? I have seen it work in certain applications.
@minaminx
Жыл бұрын
you could get a puller on that. The drive bolt pushing on stud an hooks over the back
@harveysmith100
2 ай бұрын
Nice tip. The only thing I would add would be to use a 1mm slitting disk
@Peter_Riis_DK
2 жыл бұрын
Bloody hell, Alan. Please don't succumb to the vertical video syndrome any more. Anyway; top repair tip, thanks.
@shawazonfire
Жыл бұрын
thank you sir
@elsancho6697
2 ай бұрын
Do they not have torches where your at? You get that ear cherry red and that stud will pop out no problemo
@DarrenSteele-mx3ks
Ай бұрын
That was great!
@robertboykin1828
2 ай бұрын
I'm 80, retired mechanic, dun fixin that old junk. Now I trade that crap in.
@Theorangeman.
6 ай бұрын
Also put a socket on the flush part of stud and push it out with the vice
@markk8225
8 ай бұрын
Suggestion: After cutting the flange, insert a chisel in the groove and give the chisel a sharp tap or two to slightly expand the groove. NOW the bolt should tap right out.
@alan4x
8 ай бұрын
that is a really good idea, cheers
@johnfry8737
6 ай бұрын
😂if you have a oxy acal torch heat cherry red quench with ice cold water put wrench on turn it out shock. Loosen up every time old welders trick works every time
@scmiata99
11 күн бұрын
Pb blaster help out alot!!!
@alan4x
10 күн бұрын
😁
@dave-huston-dublin
2 жыл бұрын
Check the lower gearbox mount.
@psdaengr911
18 күн бұрын
I'd have used an angle grinder to remove the head and projecting stud and drilled it, but this way looks easier. Only issue is that the exposed threads within the flange cut are a rust accelerator, and the location is already known to be a rapid rusting problem. To stop that, maybe apply antiseize on the "entrapped" thread then use JBWeld to stuff the slot with the new bolt in place?
@alan4x
17 күн бұрын
😊
@anthonyblacker8471
Жыл бұрын
One point I'd make would be well even if you have a map gas torch or even propane and not a real acetylene torch, still heat it up with anything, put a big socket BEHIND the head of the stud and whack it with a hammer. A little heat goes a LONG way!! Great work though, I'm about to try this on my friend's Ford F250 where the Y pipe meets the catalytic converter, that flange there.. fun thing is there is a THIRD bolt up on TOP that you can't get to without disassembling the whole exhaust. So fun!!
@waynebeck7801
2 ай бұрын
Wouldn’t it be easier to grind the stud flush and drill it out?
@davidhauk4163
5 күн бұрын
Good job.
@alan4x
5 күн бұрын
Thanks👍
@timhancock6626
2 жыл бұрын
One of those little electric induction heaters might do the trick by applying heat locally to the stud, but cutting a slot makes complete sense anyway.
@hydewhyte4364
Жыл бұрын
I have one and love it, but to get enough heat into a flange like that you'll be there all day. You can't operate them for more than 1 minute at a time of they shut down and take 5 minutes to reset. So 30 seconds on, 15 seconds off, until you get enough into it .... They're really good for nuts, but anything bigger you really need a torch.
@aimized1460
Жыл бұрын
why did you nut cut the thread off.. you keep saying bending the flange if you hit it right well why didnt you wedge something at the back of the flange to support the hits... i could of taken this bolt out 6 diff ways leading to sunday, thanks anyway CUT thread and dont bang 100x armature work
@SJR275
2 жыл бұрын
What about cutting the bold off and drilling it out?
@minaminx
Жыл бұрын
but your solution is still a simple and excellent solution.
@steved6413
Жыл бұрын
Thanks...I will give it a try.
@steved6413
Жыл бұрын
Thanks again...worked like a charm!
@alan4x
Жыл бұрын
excellant
@pauljanssen7594
Жыл бұрын
Actually you can get a bolt puller unusual looking tool but instead of using penetrating oil you heat up the area of the stud or bolt use paraffin wax as a it doesn't burn off like paraffin wax. Of course this is pressed in stud usually has one comment said you cut the stud off drill it partly out you say drift to knock it out.
@lancedenney2408
8 ай бұрын
Break or cut, then use a small 2 arm gear puller! Hold tight together as you tighten the center bolt. Takes 5" each! Not welded!
@misterbulger
9 ай бұрын
I wish i had room to work off my manifolds... Mine are threaded in there too. Not much room to even reach a torch.
@abderrahimhaddanitankioupr9367
2 жыл бұрын
THANKIOU
@ifixeditmyself1926
Жыл бұрын
Magnificent!
@alan4x
Жыл бұрын
cheers
@jasondinscore4251
Жыл бұрын
You fucking rock mate!!! I thought that was going to be a much harder chore.
@alan4x
Жыл бұрын
lol, glad it helped
@fartybutt2666
Жыл бұрын
Whats the best drill bit to use, going down the drill out route, please?
@alan4x
Жыл бұрын
cobalt drill bits will do fine, depends how much you want to pay as some of these drill bits can be very expensive
@fartybutt2666
Жыл бұрын
@@alan4x thanks for your reply Alan.
@RS-vu3df
2 ай бұрын
Why dont you grind it flush and push it out with a bearing-puller?
@belvidereovader1076
12 күн бұрын
Wouldn't that leak ?
@cisuris
Жыл бұрын
“Come through your cat” made me laugh 😅
@alan4x
Жыл бұрын
lol
@neilobusk
2 жыл бұрын
Exhausting work for sure...:) N x
@billsmith305
29 күн бұрын
Why didn't you turn the stud after cutting ?
@mondodaftasabrush
2 жыл бұрын
Your braver than me ... with that 360 cutting grinder with shades on ... I do love a guard me would never use a tool without one Probably the best and easy solution to rectify the problem at hand Yeah the comments are funny, but if we had all day to make things perfect the average customer wouldn't pay the rate ... some don't even care just want it repaired cheaply and NOW !
@melbournechugging2999
Жыл бұрын
Just heat the back of the stud until it's red hot then use an air hammer to push it out
@x-man5056
Жыл бұрын
Good method. The only remaining question is; why aren't you changing the rusty muffler out also? It can't be any better inside than the studs on the outside. That would also negate the need for removing that stud.
@AJ-qn6gd
Жыл бұрын
That was the catalytic converter !
@jra55417
8 ай бұрын
@@AJ-qn6gderm. No. It was the centre silencer. You can see him fit a brand new cat to it at the end of the vid
@rasmadrak
2 жыл бұрын
Isn't there a risk of destroying the cat ceramic by pounding on it? Or is it durable enough for that? I handled my new cat with silk gloves during install... :'D
@ghassanalfarra8935
2 жыл бұрын
@05:54 you can see inside the CC that the honeycomb still seems to be intact .. but I too would have worried
Пікірлер: 260