Brilliant! I'm an old hand at wrenching and this is one of those super valuable tips from experience you see now and again. Thanks for sharing ,will use this very evening.
@glarbtom1656
3 жыл бұрын
This place is the best for classic inboard boat parts and repair that are harder and harder to find online. I gave them a call and they helped me out with my stuffing box packing question. Vince in crew, thank you!
@donaldcoulter6017
3 жыл бұрын
Thanks Vince! You're a great asset to the Inboard world!!
@eviemoody
Жыл бұрын
Thank you for making this video! You completely demystified the process! In the boat yard about to try it now.
@Psychobilly
3 жыл бұрын
I was literally running this through my head today! I’ve done it once about 10 years ago when I bought my ole 29 YO MC. Strut was bent and all. Used this technique, pulled shaft out, and I was able to straighten the strut. Back together and a lil motor alignment. The ole ‘92 still running strong. Vince, that would be a great video next. Checking motor alignment. Bring on the sunshine!!
@thetileman1984
3 жыл бұрын
Yes Vince a motor alignment video
@dustindwight6248
3 жыл бұрын
@@thetileman1984 he’s a step ahead. kzitem.info/news/bejne/om6Hx2Z8in6UaqA
@kristopherlilly
3 жыл бұрын
Vince talked me through this on the phone. Much appreciated video. Thanks for all the help on KZitem and on the phone. Great company to purchase from!
Жыл бұрын
thanks for all the knowledge contained in this video!
@andrewdaviston3986
2 жыл бұрын
God bless you and appreciate you making videos you are a good teacher and blessing others Ty
@romakayak
2 жыл бұрын
Excellent advice, thanks for the information from Colombiers in the south of France.
@chrisp.816
3 жыл бұрын
Hello Vince, I have a pcm 1.23:1 transmission on my 89’ supra sunsport. Could you make a detailed video on how to change the trans oil (how many quarts, type of oil, what to expect, proper fill level with the dipstick, flushing, etc) Thank you. These videos are very helpful!
@jonathanworkman5872
3 жыл бұрын
Hi Vince- I have an 81 Bayliner 3270, twin 5.7’s and old Volvo Penta MS3 transmissions… I have to replace the stbd transmission with a rebuilt unit. Can this be done with the boat in the water? Can the prop shaft be pushed back without causing any leaking? Any input would be very much appreciated. I’ve watched a few of your videos and have learned a bunch so far… thank you
@skidim8143
2 жыл бұрын
The drive shaft should still be up against the shaft seal so we would say you are probably able to do it.
@larryjohnson5597
Ай бұрын
@@skidim8143 are you still in business
@Interdiction
14 күн бұрын
Great tip
@scottn7694
3 жыл бұрын
Great video. Great place to buy parts. Great people.
@joehand9650
Жыл бұрын
Great tip, thanks
@matthewsilva8225
Жыл бұрын
How do you put the coupler back on?
@KingsLandingSportFishing
3 жыл бұрын
Great video…. Where can I buy the Albert’s Coupler Tool you use in the video? I’ve search google with no luck…
@skidim8143
3 жыл бұрын
Thank you, here's the link to the product on our website! skidim.com/coupling-wrench.html
@goodboyringo9716
3 жыл бұрын
Is it nuts to want a ski boat if you 're not skiing and only want to fish or just have a boat ?
@skidim8143
2 жыл бұрын
a lot of people enjoy a ski boat just for the way it handles and the way it sounds. The only thing to be aware of is there not great in very rough water. however a calmish lake it would handle great.
@dewholdingsllc1050
3 жыл бұрын
Yes inboard coupler access and removal is a walk in the park compared to a 08 Malibu v-drive shaft coupler. Be great if you can do a video on one of those.
2 жыл бұрын
hello guy, I am from Vietnam, I want to buy this gearbox for my engine
@joshuamurray4296
3 жыл бұрын
I did this and stripped the threads on the nut Hopefully not the shaft cause it's still stuck on it
@danlow3665
9 ай бұрын
Brilliant
@debbieketzel1142
Жыл бұрын
Need to get shaft out of reversed clutch
@stick9758
3 жыл бұрын
when has any coupler actually came off like that? i thought i was gonna lean something :)
@3vdad
2 жыл бұрын
Great way to ruin the flange on your transmission if the coupling is stuck - like most are. It's not worth the risk use a puller.
Пікірлер: 33