If you stand them up vertical spin them 90* and they drop between the pipes, done loads, a bit awkward but no pipe cutting
@bluebulldog_uk
8 ай бұрын
Have to give that a try. never even knew you could as pipework seems very tight to fit between
@stephenayers8242
8 ай бұрын
Always enjoy your videos, keep them coming👍🏻👍🏻
@bluebulldog_uk
8 ай бұрын
Thanks mate 👍
@johncrolla
8 ай бұрын
Loved this video , informative and funny 😂. Thanks , can’t wait for future video’s
@bluebulldog_uk
8 ай бұрын
Thanks mate 👍👍
@mfielding007
8 ай бұрын
Really like your videos, have a great new year and keep them coming
@bluebulldog_uk
8 ай бұрын
Thank you 👍
@stuartgammie1862
8 ай бұрын
Great vid m8, on them worcesters i honestly find it easier just to whip the pump out
@bluebulldog_uk
8 ай бұрын
Someone else said that as well…I might have to time this see which is quicker 😅👍👍
@jacquelinestanyer8533
8 ай бұрын
😊😊 great video above and beyond 😊😊
@stephenedwards9872
8 ай бұрын
Enjoyed the video as usual
@bluebulldog_uk
8 ай бұрын
Thanks mate 👍
@LeeRevell-y3h
8 ай бұрын
Happy new year mate, brilliant video as always.
@bluebulldog_uk
8 ай бұрын
Thanks mate happy new year 👍
@robertmailer4978
8 ай бұрын
Drain a boiler one and ended up draining down water cylinder and main water tank in loft!!🤣🤣🤣 that gave me a surprise!
@bluebulldog_uk
8 ай бұрын
Yeah I bet 😅
@jasonsimpson-ks8un
8 ай бұрын
Nice video as always
@bluebulldog_uk
8 ай бұрын
Thanks 👍👍
@mgtowsoldier8673
8 ай бұрын
I had a 2hex passing on a brand new worcester gstar...worcester just came and replaced it...bizzare..best worcester tip i know is the syphon through the heatex for a oheating heatex.....with the baxi Dvs i dont D about with the diaphrams...just change the whole of the pressure differential brass disc takes minutes
@Stefan_Kawalec
8 ай бұрын
Happy New Year.
@bluebulldog_uk
8 ай бұрын
Happy new year mate hope you have a great 2024 👍
@tirvplumbing
8 ай бұрын
Happy new year bud😊
@bluebulldog_uk
8 ай бұрын
Happy new year 👍👍
@markmanning1528
8 ай бұрын
Have sent you a message about doing a power flush this month 🙌🏼
@bluebulldog_uk
8 ай бұрын
What’s that in Stafford via customer form? I’m back to work from the 8th but looking at work that’s been sent me over the next few days 👍👍
@markmanning1528
8 ай бұрын
@@bluebulldog_uk nah mate it was on instagram I’ll send you another message now just to highlight it so you can see it 👍🏻
@tonymurff5234
8 ай бұрын
Happy New Year Mate, Ye that Worcester would be a hard one to diagnose for sure, Great Chanel, looking forward to seeing more throughout 2024 👍👍🤜
@bluebulldog_uk
8 ай бұрын
Thanks mate hoping to keep the content coming in 2024 🙌👍
@rossnolan2883
8 ай бұрын
Legend 🙂🙂🙂
@bluebulldog_uk
8 ай бұрын
Thanks mate happy new year
@neiltitmus9744
8 ай бұрын
Plug insink stanley to take cap out
@MrVictorvolvo
8 ай бұрын
As a heating engineer who would rather replace a tap then fix it. I like the look of that cartridge set, when you take the old cartridge out how do you know which one to replace it with? Do you find they always have the correct markings on them to match the ones in the box, or is it a case of eye balling it?
@bluebulldog_uk
8 ай бұрын
Got the set with a spline gauge with a ruler on side, so you know which cartridge to fit, worth the investment for tap repairs 👍
@shaunpreston1661
8 ай бұрын
Great work mate 👍🏼 how did you know what cartridge you needed for the job and what cartridge set is this one you have bought? Apologies if this is a stupid question just at the beginning of my training in plumbing haha
@sjallsopp7778
8 ай бұрын
I’m interested in the cartridge kit also👍
@bluebulldog_uk
8 ай бұрын
No problem mate no stupid questions here pal 🙌👍. I got it from a company called bathroom spare parts, it came with the spline gauge with a ruler on it so you take old cartridge out and use gauge and ruler to measure up. Really good bit of kit 👍
@bluebulldog_uk
8 ай бұрын
Just answered mate about set 👍
@ed393
8 ай бұрын
Should have the sink plug in, how many times has the screw disappeared down there and turned a 5min job into a nightmare.
@bluebulldog_uk
8 ай бұрын
Yeah done that before 😅👍
@JayGasEssex
19 күн бұрын
Just take the pump out?
@glynstorer3269
8 ай бұрын
Why don’t the design the boiler with the plate heat exchanger at the front for easy access
@bluebulldog_uk
8 ай бұрын
Would make life easier, worse one I’ve tried is a navien, impossible to get out unless you dismantle the boiler
@johnmoran7082
8 ай бұрын
Link to that rubber funnel thing please
@bluebulldog_uk
8 ай бұрын
Thats the link for it on amazon mate amzn.to/3NLQmQo Happy New Year
@gerrosrightboot
8 ай бұрын
Personally I prefer just taking the pump out....maybe if some of the pipework runs up the back.
@bluebulldog_uk
8 ай бұрын
If pipework runs at back then yeah il take pump out, I prefer this method as less disturbed the better but Worcester o rings normally ok to reuse if you take pump out 👍
@gerrosrightboot
8 ай бұрын
As long as you don't lose the o ring from the pump and spot the facts dropped off it fine.
@geeguneri5041
8 ай бұрын
I rather take out the pump. I find is easier. Don't need to fiddle about compression fitting or soldering back
@bluebulldog_uk
8 ай бұрын
Reason I like doing it this was is less disturbed seals, Worcester o rings am normally sound thou so taking pump out ain’t so bad 👍
@benregler9872
8 ай бұрын
Rule #1 when working on taps. Put the plug in the hole 😂
@bluebulldog_uk
8 ай бұрын
Yeah forgot that one 😅
@56ty78ui
8 ай бұрын
That P2P trick isn't new. Cut the gas pipe too if you want. Doesn't work if piped up behind the boiler.
@bluebulldog_uk
8 ай бұрын
No it’s not new just some people might not of been shown it, if it’s rear piped then I will normally take pump out
@bluebulldog_uk
8 ай бұрын
Happy New Year everyone 🙌👍 Let me know in comments if you knew this tip or if you know any that I’ve missed for a Worcester 👊
@paulgarrett9
8 ай бұрын
Im glad I don’t have to work on Worcesters.
@bluebulldog_uk
8 ай бұрын
Cut your fingers half the time working on them 😅
@chrishard7616
7 ай бұрын
Using grips on the basin tap like that is disgraceful! Should have correct size spanner’s. What is it with “plumbers” using incorrect tooling and graunching things?
@bluebulldog_uk
7 ай бұрын
Graunching the cartridge that was coming out anyway…I mean what’s the harm if it’s been scrapped anyway? Spanner was used to put new one in so no damage on that I can’t see the issue if I’m being honest
Пікірлер: 63