I don't check for balance every time. should have been more clear. I have ran a commercial lawn business for 14 years. Blades get sharpened 1-2 times a month. If you grind them even they will not be off balance. It's very rare I see them off. You will know when they are off balance if you feel more vibration than normal. Thanks for the comment. Just to be clear. It is always good practice to balance your blades.
@RichardNixonsHippieRemoval
3 ай бұрын
Got a lotta experts in here. Do your own video then. This does fine for my HRN216.
@anthonyvalenti4191
Жыл бұрын
Great video thank you for taking the time to help others.
@bigmacbeta
Ай бұрын
Thanks mate.
@whitneymacdonald4396
4 ай бұрын
When I worked at a golf course the owner insisted we spray off the grass debris every time we used a mower (every day). He said the grass will eat away at the metal. Ever since then I spray down my mower after each cutting. Only takes a moment.
@collectingonthecheap56353
2 жыл бұрын
I have never thought of turning it on it's side. I have always just raised it off the ground onto blocks and reached under, just like for draining oil for those older models with convenient drain plug on bottom of deck.
@robfreeman5783
2 ай бұрын
vice and a hand-held file is the way to go imo, maintains an angle much better and removes less material.
@roncooke2188
Жыл бұрын
Good advice interesting video I clamp my blade to my workbench also i pop my welding gloves on, I fitted new filter Thank you!
@nightmareperdomo1313
Жыл бұрын
Thanks you for the video bro before my yard 1 hours, now 20 minutes 😂😂
@maryhibbard9419
10 ай бұрын
Thank you! That was very helpful!!
@TheCrazyCaptain
9 ай бұрын
Glad it was helpful!
@teshuvahemmet3036
2 жыл бұрын
Thanks for the info 🙂
@albinotravalja7942
2 жыл бұрын
And you make sure you don’t forget your spatula under your mover……..hahahahahaha
@robbflynn4325
Ай бұрын
Top work!
@DuffyF56
2 жыл бұрын
There is a torque spec on those blade bolts and there are usually bellville washers on the bolts that have to be oriented properly to work.
@136relim
2 жыл бұрын
I think maybe you over simplified this operation. That looked kinda dangerous with the angle grinder. Cleaning the blades of built up grass also a good idea. Helps when balancing the blades - which you seemed to skip. Also you didn't check the gap on the new spark plug. Dummy me had my blades on upside down. Didn't realize that until I brought it in to be serviced for a different issue. Blades move in a counter clockwise motion. I didn't know that either. On another note....Great job on the filming of the video. Good camera angle. Sorry for all the negativity. I should have read the other follow up comments first.
@TomokoAbe_
Жыл бұрын
I have not sharpened my Honda lawnmower blades for 4 years and it cut well...until it didn't. I changed the blades. Oh man those blades were really wore out LOL.
@denisepit
Жыл бұрын
Thank you! I got the flap disc. Was just a little hard for me as a women to get the blades out. But the rest was great. Thank you for the tip! How often do you sharpen?
@TheCrazyCaptain
Жыл бұрын
Once a year should be good for regular home owner type of use.
@AahFukIt
Жыл бұрын
Hi I noticed your comment mam, if working the wrench is the problem. Simple find a piece of pipe the you entend the wrench with, then working the wrench should he alot easier. Same method I use when changing tires on my car.
@mf6532
3 ай бұрын
I have the same mower, how often should I change the oil filter? Thank you!
@mrafiuddin
11 ай бұрын
I like the video. What kind of sharpener you are using? Thanks in advance.
@richardbotha777
4 ай бұрын
All the safety precautions in place. But you should torque your blades.
@davealin2431
2 жыл бұрын
What about using a torque wrench on the blade bolts??
@TheCrazyCaptain
2 жыл бұрын
Any wrench will work, torque wrench makes the process faster.
@xuchao9098
3 ай бұрын
is this a stainless deck ?
@orrgazmo
2 жыл бұрын
Remove the spark plug fully, the mower can still start. The ignition lead doesn’t have to be plugged in, only has to be touching the plug.
@robfreeman5783
2 ай бұрын
I think there's a better chance I get struck by lightning twice while winning the lottery than my mower starting spontaneously.
@earlmorton6265
2 жыл бұрын
Would it be better with the fuel tank be empty?
@TheCrazyCaptain
2 жыл бұрын
That would be the best, but not always possible. I don’t like draining out the gas because I don’t want to contaminate the fuel or waste fuel.
@earlmorton6265
2 жыл бұрын
@@TheCrazyCaptain I meant to use up all the gas. I would have a working plan first. But you're absolutely right. I don't want to drain the tank. Thanks.
@fordmodela3641
2 жыл бұрын
@@earlmorton6265 I use a wal-mart plastic bag and put it between the gas cap and tank, then tighten snug. It won’t leak if the tank is a little bit on the full side. Always worked good for me.
@roymg
2 жыл бұрын
Had any trouble with the Honda rear wheels?
@TheCrazyCaptain
2 жыл бұрын
Not really other than they wear out too fast. I know some have had an issue with the rear wheels not wanting to turn backwards while pulling mower back.
@HalbertS-wt5hr
2 жыл бұрын
Does it really pay to invest $10+ to have a shop sharpen your blades? My 42" craftsman uses 2 blades. I can buy a 10-pack of oem for $75. It may make sense to do it myself with an angle grinder, but I can't see farming it out when it is less costly to purchase new.
@TheCrazyCaptain
2 жыл бұрын
I agree
@sameold5050
2 жыл бұрын
5:10...better to secure it (with a bolt through the center) to a stable surface (table).
@newton296
Жыл бұрын
any issues with the carburetor ? I have this mower and the carb got gunked up so bad it wont run after only a year . never had a carg issue with briggs & stratton. Honda has a good name but I fear some of their engines are pretty bad.
@TheCrazyCaptain
Жыл бұрын
I have never had an issue with the carburetor or engines in the Honda Mowers. The only issue I have had with Hondas is the tires wearing out too fast
@nosilverharbinger
Жыл бұрын
It is likely an issue with the gas it is getting. It could be stale and/or have too much ethanol in it. That will gum up a carb on a small engine no matter what type it is.
@bobcaygeon4533
Жыл бұрын
If you have winters and store mower. Empty gas and run mower until it stalls. Never leave the gas in and never use gas with ethanal in it. I have this same honda mower for over 5 years. It is a 1 pull start lawnmower. I guess even Honda makes lemons😜.
@nosilverharbinger
Жыл бұрын
@@bobcaygeon4533 I agree that if you can get ethanol free gas that is the best option. The problem is that many areas don't have it available. I looked into it, and the Honda HRR216's manual says this: "You may use regular unleaded gasoline containing no more than 10% ethanol (E10) or 5% methanol by volume. In addition, methanol must contain cosolvents and corrosion inhibitors. Use of fuels with content of ethanol or methanol greater than shown above may cause starting and/or performance problems. It may also damage metal, rubber, and plastic parts of the fuel system." Even that can be tough because many gas stations are running 15% ethanol, and use methanol on top of that these days. In that case about all you can do is try your luck with using a fuel stabilizer that has an ethanol treatment.
@edfarmer154
2 ай бұрын
It ain't the honda giving you prob.... it's the ethanol gas. Honda is the top of the small engine game,, very high quality everything for decades. Look it up, ethanol gas that sits for 6 months or more turns to gunk and clogs all orifices in the carb. Stop saving $1 and buy real gas for anything that sits for months
@jonathanterrill6017
2 жыл бұрын
U don't check for balance? It's a $5 Part, very easy. If it's out of balance You will know it very fast. Grinding 3 times per side is not balancing.
@TheCrazyCaptain
2 жыл бұрын
I don't check for balance every time. should have been more clear. I have ran a commercial lawn business for 14 years. Blades get sharpened 1-2 times a month. If you grind them even they will not be off balance. It's very rare I see them off. You will know when they are off balance if you feel more vibration than normal. Thanks for the comment. Just to be clear. It is always good practice to balance your blades.
@lanakurganskaya6790
Жыл бұрын
How do you balance blades?
@carlthornton3076
2 жыл бұрын
Very Good!... 12🐄🦉🏴☠✝
@spl1011
2 жыл бұрын
I was on board till the impact wrench on the bolts.
@kenlawrence4989
2 жыл бұрын
You need to balance your blades after sharpening the blade
@ronl8040
2 жыл бұрын
I always use a good stiff putty knife to remove excess grass and dirt buildup before I sharpen the blades and then balance them before I put them back on.
@sidneyeaston6927
2 жыл бұрын
Not that important, they do not have to be perfect mower blades should be balanced if you have to take a lot off them because you hit something or every fifth normal sharpen. Ride on mowers with long blades require better balance due to the effect of the distance from center makes a small weight react to the revs the blade is rotating at.
@TheCrazyCaptain
2 жыл бұрын
I don't check for balance every time. should have been more clear. I have ran a commercial lawn business for 14 years. Blades get sharpened 1-2 times a month. If you grind them even they will not be off balance. It's very rare I see them off. You will know when they are off balance if you feel more vibration than normal. Thanks for the comment. Just to be clear. It is always good practice to balance your blades.
@garyt7830
Жыл бұрын
at 7:56 MOMO leaves his Putty Spatula Knife under the lawn Mower.............. which is dangerous to leave any tools under a LAWN MOWER !!!!
@dps6198
2 ай бұрын
You don't maintain your lawn mower very well do you. The undercarriage is full of dried stuck on grass. The owners manual says to wash the mower regularly and keep it CLEAN.
@TheCrazyCaptain
2 ай бұрын
This mower was used commercially in a mowing business. It was mowing over 10 yards a day for over 5 years. This was not used as a home owner. An average home owner mows 32-40 mows a year. That was done every week on this mower.
@keithhill9852
2 жыл бұрын
You really keep underneath clean lol never lend anything to you
@hswing11
2 жыл бұрын
IF YOU NEED THIS TYPE OF INSTRUCTION HIRE SOMEONE TO DO YOUR LAWN
@rahinc
Жыл бұрын
So you’re saying if you own equipment that needs basic maintenance periodically you should not learn how to do it yourself? What a dumb comment.
Пікірлер: 59