Unknowingly I took the front pass seat out ... and turned the ignition on. Gave me this same code. Fortunately I have a better scanner at work. I could go into the body control module and reset codes in the restraint system. I have a 2012 JCW hardtop
@vitadakine
5 жыл бұрын
Thanks to your videos I did some works on my mini by myself. Thank you. Great job!
@silas6583
4 жыл бұрын
This is the exact information in looking for but your seats have a dofferent connector than mine do. Any chance you chould show me how this is done for the 2013 model? Its one big yellow connector instead of two small ones
@ellemeno0
4 жыл бұрын
Why should you not go driving around like that? What would happen?
@djhatstand7312
3 жыл бұрын
You should always disconnect the negative first, that way it wont spark when you reconnect or bridge a tool to ground and you also wont spike the sensitive electrics
@Crushercurtis702
Жыл бұрын
2..2 ohm red red gold gold on a 4 band is 2.2 ohm
@filiberozavala1436
2 жыл бұрын
I have a question where you can find a little fuse you connected to the cable
@torgnyb4971
7 жыл бұрын
Thanks guys, worked out well when changing seat. The Brandgarage wanted 1700 Euro to solve this and recomended me to scrap the car (Cooper 2001 in perfect condtion)... :-(
@L663
7 жыл бұрын
Cool - this is why i love the internet !
@1000RXR
4 жыл бұрын
Merci ça a fonctionné sur ma mini one r50 j ai mis Les résistances par contre j ai passé la valise
@stadixisnotagamer
4 жыл бұрын
Ça me rassure, je vais tester sur la mienne du coup. Ça a marcher du premier coup ? Pourquoi tu l’a passer à la valise en plus ?
@1000RXR
4 жыл бұрын
stadixisnotagamer bahh écoute lorsque j ai mis les résistances ça ne s est pas éteint j ai passé la delphi et le défaut je l ai effacé
@elodiedubois5119
3 жыл бұрын
@@1000RXR Bonjour, pouvez vous me dire quelle résistance vous avez utilisé ?
@1000RXR
3 жыл бұрын
@@elodiedubois5119 je crois 2ohm
@FranciscoSantos-ub6zl
3 жыл бұрын
Hello, Can you help me with a doubt? I'm trynign to fix my release trims, how can I replace release trims for mini sport seats? Great job!
@nasgamueds89
Жыл бұрын
Works wonders! Thank you for saving me money!
@L663
Жыл бұрын
You're welcome!
@carlosalves35
5 жыл бұрын
Hi mate. Great video!!!. Can you do one that explains the dash please. Got my self one of these but need some help explaining some of the dash and buttons?
@Apoplectic_Spock
7 жыл бұрын
How did the new year's resolution work out for you? LOL Was it okay? 😉
@Asimicrete
5 жыл бұрын
Thank you again!
@asolano8036
3 жыл бұрын
It’s working on a 2012 Mini Cooper s ??????????
@NinaThomas1969
5 жыл бұрын
Hello! I own a MINI Cooper -2002. I want to remove the airbag on the passanger side, or at least make the light go off as it´s constantly on. Can I just find the wire and pull it? Just like that?
@warwickdean
6 жыл бұрын
And how to remove the recliner cable?
@Nicolasc025
4 жыл бұрын
hi, wich is the correct resistor? any special condition? i put a 3.9 ohm 1/4 watt with 5% tolerance and doesn't can you help me plis
@Danyl830wazzup
5 жыл бұрын
in my car I have the black connector what is that for?
@maxandre5213
Жыл бұрын
wo kann Ich diesen widerstand kaufen
@alexbrz2000
6 жыл бұрын
My R60 has a main plug yellow, with 2 other smaller plugs. do you know how to do it ?
@Slazlo-Brovnik
Жыл бұрын
I would retrofit seats with airbags and tensioner if my MINI would not have them - I really don't get why people would take that out.
@tigsemmett9167
3 жыл бұрын
Did you have to use to remove the code. As I tried this and didn’t work. Any links for the resistor you brought?
@LolGetAJob
4 жыл бұрын
So I would solder the wires to each end of the resistor correct? Great vid thanks!
@L663
4 жыл бұрын
Hi This is correct
@LolGetAJob
4 жыл бұрын
powerfulukltd thank you again!
@VANESSASVANLIFEJOURNEY
4 жыл бұрын
*great tips*
@deadzombiekilo
7 жыл бұрын
Can you use a higher or lower ohm resistor? Say a 1.5 or a 3 ohm resistor?
@L663
7 жыл бұрын
I guess so - but not sure ...
@djtoo7
5 жыл бұрын
cooooool with this work on a R56 2007 mini S?
@irishali896
5 жыл бұрын
Hi there, do you know what to do with the heated seat/ weight sensor? Any bypass kit online will only come with the bypass connectors for the seat belt pre tensioner, and the airbag. Thanks
@erikg6905
5 жыл бұрын
What error codes do you get with a bad seat belt tensioner
@NathanKett
6 жыл бұрын
Would this work to remove an existing airbag warning light for the seat airbag?
@L663
6 жыл бұрын
Yes adding the resistor - then you need to clear the stored fault
@audreyr7484
5 жыл бұрын
hello, unfortunally i removed the right front seat before disconnect the battery, now the airbag signal light is on, do you know if i have no other choice to go to my mini dealer? thank you
@antoniogarcia7140
5 жыл бұрын
@@audreyr7484 I did same, but how u reset it fault ?
@ianfrench198
3 жыл бұрын
Hi I have just tried this with the airbag seat and the and the airbag light will not go off have you got to do the tensioner as well
@justincooper9488
2 жыл бұрын
@@audreyr7484 hi did u ever find a fix for this?
@mfatihates
4 жыл бұрын
Welche diode ist das ?
@nicoznam
4 жыл бұрын
2 ohm
@lrcx6888
7 жыл бұрын
Hello Can you say me Value of this componant?
@L663
7 жыл бұрын
Yes i think it was 2 Ohm.
@aboaliali7915
7 жыл бұрын
Hi, 2 ohm resistor with ......watt ?
@L663
7 жыл бұрын
0.5watt or higher would be fine
@aboaliali7915
7 жыл бұрын
Hi,ive got 2.2 ohm with 0.6 watt , is this ok or should be like yours ?
@L663
7 жыл бұрын
you should be OK with that i recon.... but clearly i have not tested that so cant be sure 100%
@aboaliali7915
7 жыл бұрын
Thank you mate.
@jasper7851
5 жыл бұрын
@@L663 in your video i see a 3.2 ohm resistor. ? Oranje, red, gold.
Пікірлер: 58