was petrified my new £350 bass was useless after getting the jack stuck, and then I found your video. absolute LEGEND!
@user-ih7qd8yq4n
6 ай бұрын
Thanks for your video! I tried several sizes of screws to help me out of the TIP and I found that the 3.5mm width screws fit just right.
@corrzyLAD
5 ай бұрын
Hero!! Always find the gem I’m looking for in the comments eventually
@JoelYeoh
4 ай бұрын
Glad to hear that!! 👍😊
@matthewpennington2583
Жыл бұрын
You saved my helix. I was about to give up on anything but tearing it open. I can’t believe after like a year all I needed was a q-tip.
@JoelYeoh
Жыл бұрын
You're welcome and Glad to hear that Matthew! Also glad that you didn't have to risk causing further damage to your helix 👍😂
@MarceloMoraisGuitar
3 ай бұрын
Before I watch this video, I've opened my Pod Go, and its not possible to take the tip out from inside, the jack is sealed!
@PlumpChickenButtocks
Жыл бұрын
This is the most random and relatable tutorial I have ever seen. It worked for me but I had to put a little super flue to the end of my screw. You saved my life. Thanks mate.
@JoelYeoh
2 ай бұрын
Glad to hear that!! Happy for you 👍😊
@YanaiMorris-bl4vi
Жыл бұрын
The screw idea worked great and fortunately pulled out the whole thing in one piece. The only other problem I had was the little protruding thing that makes the jack click into place. It was preventing me pulling the tip out with the screw. I fixed that by pushing it to the side with a thin nail while pulling on the screw and it came right out. Thank you.😃
@fr0kenfaia
3 ай бұрын
Thanks for the tip about the thin nail method, I'll try it.
@JoelYeoh
2 ай бұрын
You're welcome! Glad it helped👍
@luiscarlosacostacortez7702
Жыл бұрын
You Sir, deserve a medal. This worked perfectly, thank you so much!
@JoelYeoh
Жыл бұрын
You're welcome Luis Carlos! Glad to hear it worked for you too 👍😊
@909dynamic
2 жыл бұрын
Truly saved my life and WALLET with this video !
@JoelYeoh
Жыл бұрын
Glad it helped Ivan! 👍Don't go buying a new drum module 😂.
@timibenchek
10 ай бұрын
You just saved my Yamaha piano, you are a legend. I have added glue at the end for the final piece.
@JoelYeoh
2 ай бұрын
Glad to hear that and happy for you! 🙏😊
@jameswilkinson3649
6 ай бұрын
Just saved me buying a new audio interface with the screw/screwdriver trick! THANK YOU SO MUCH!!
@JoelYeoh
4 ай бұрын
You're welcome bro! Glad to hear 👍😊🎸🎶
@ESJ-74
Жыл бұрын
Thanks!! You just saved my vintage Casio MT-85! My search terms were "removing broken tip of 1/4 trs connector." Worked like a charm.
@johnschreiber5424
Жыл бұрын
Awesome! The screw worked to get the plastic ring out, but the Q-tip wasn't strong enough to pull the tip out. However, I tapered down the end of a chopstick with a little sandpaper, and that worked! Thanks!
@beattender
Жыл бұрын
You’ve just saved me a load of money. I was very close to buying a new sound card! Thank you!
@HowleySounds
Жыл бұрын
You just saved me a lot of time and stress. Thank you so so much!!
@JoelYeoh
Жыл бұрын
You're welcome Kevin!! And glad to hear 😊🎶
@emmanuelmeyermeyer1083
Жыл бұрын
Thank you making this video. I had a broken jack in my fender passport pa and I was ready to tear it down to get at it. This worked! Thanks again.
@JoelYeoh
Жыл бұрын
Glad to hear that Emmanuel!! You're most welcome 👍🎶😃
@treyfeatherston
11 ай бұрын
This worked on my interface that’s been broken for TOO long. Thank you.
@JoelYeoh
2 ай бұрын
You're most welcome!
@alexgoraieb8339
Жыл бұрын
You are a champ !!!!! That is the best tip I’ve had on U Tube ! Saved my day ! Thank you !
@thumper300zx
21 күн бұрын
Tip...I get it.
@milanwho
3 ай бұрын
Thank you so much. Almost sent my soundcard to the manufactuerer. Saved me a lot of $$$!
@STHIRINN
9 ай бұрын
Thanks brother. Your video helped me remove the tip with the earbud from my mixer jack. Was losing a valuable channel due to this
@JoelYeoh
2 ай бұрын
You're most welcome. Glad it helped🙏😊
@terrybrown797
Жыл бұрын
Thank you for showing this useful trick been trying to figure out how to remove my broken Jack from my stereo without breaking it further I will give this a try
@JoelYeoh
Жыл бұрын
You're welcome Terry!! Hope this helps 👍😊
@jhapettamo6879
2 ай бұрын
Thank you very much. My JBL partybox got the same problem , the tip of a microphone jack broke , this is the only thing that got it out and it was effin easy . 😊
@JoelYeoh
2 ай бұрын
Glad that it helped!! Youre welcome 👍😊
@josmudge
6 ай бұрын
Worked like a dream first time, including removing the tip. Thank you so much 🙏🏽💫
@JoelYeoh
4 ай бұрын
You're welcome!!🙏😊
@OperationPhantom
6 ай бұрын
Thank you Joel! So happy to finally get the broken bit out of my TV's headphone socket!
@JoelYeoh
4 ай бұрын
You're most welcome! And glad to hear that!! 👍😊
@bbocaner
Жыл бұрын
Thanks! I wouldn’t have imagined trying it this way myself. Worked like a charm once I found just the right size screw!
@customfender01
Жыл бұрын
KZitem never ceases to amaze me. Thanks - worked like a charm - amazing!
@quingynamho
Жыл бұрын
I came here to say thank you! Saved me a lot of money because of this
@JoelYeoh
Жыл бұрын
You're welcome and thank you very much too for your kind gesture here 🙏😊🎶
@ThePearlDrummer10
Жыл бұрын
You just saved me - solved in under 5 minutes. Thank you so much!
@JoelYeoh
Жыл бұрын
You're welcome Markus! Glad to hear that it helped 👍🎶😊. Keep rocking 🎸🤘.
@Renato_Cara
4 ай бұрын
Bro you saved me one Digitech Drop. Thank you so much. Works like a charm.
@JoelYeoh
4 ай бұрын
Glad to hear that bro! You're most welcome 👍🎶🎸
@MarceloMoraisGuitar
3 ай бұрын
Thank you very much!!!! Your video saved my day!!! (and my equipment) I got it out with the first try!
@JoelYeoh
2 ай бұрын
Glad to hear that brother! Happy for you too 👍😊🎶
@juliebassett8747
Жыл бұрын
This worked exactly as directed! So pleased! Thank you!
@JoelYeoh
Жыл бұрын
You're most welcome Julie! Glad it helped 👍😀
@Simon-Edwards
2 жыл бұрын
Brilliant, the cotton bud worked perfectly to get my stuck jack tip out! Thank you so much!
@JoelYeoh
Жыл бұрын
Glad that it helped Simon! You're welcome 🙏🙂
@stever1459
7 ай бұрын
You Da Man, I'm the Fan!! Brilliant, the screw worked for me!!
@JoelYeoh
4 ай бұрын
Glad to hear that!! You're welcome 👍🎶😊
@Bestylfc16
6 ай бұрын
Legend. Worked first time. Thank you
@JoelYeoh
4 ай бұрын
Glad it helped! You're welcome👍😊
@wrayxphoto
Жыл бұрын
You are a genius. Thank you so much. God bless you brother...Ray
@JoelYeoh
2 ай бұрын
You're welcome brother. God bless you too 🙏😊
@bryanjostworth8457
2 ай бұрын
Worked like a charm. Thanks for posting.
@tsgodman4409
Жыл бұрын
Well done Old Chum, very inventive, to easy.....
@fr0kenfaia
3 ай бұрын
Amazing, thanks for this. Will try it on my XDJ-RR.
@JoelYeoh
2 ай бұрын
You're welcome. Hope it worked out well 🙏😊
@XavierNC1
Жыл бұрын
Yooo, thank you brother!!! I was about to give up after an hour with 5 different tools. 👏👍😎🍺
@JoelYeoh
Жыл бұрын
You're welcome 😊 🙏. And I'm glad it helped.
@ALSPOV
4 ай бұрын
My 🎤 Jack broke off in my wireless JBL speaker I thought I was going to have to return it THANK YOU 🙏🏻
@JoelYeoh
3 ай бұрын
Glad you didn't have too.. and that it helped! 👍😊
@GuitarCoversbyG
2 жыл бұрын
Thanks for this mate...much help for me and save me in big trouble... Tip stuck in my Boss Gt100 and i was think my god who can help me to do this..... Simply u did help me... Thank u so much👍❤️❤️❤️🙏
@JoelYeoh
Жыл бұрын
You're very welcome bro! Aww man..a tip stuck in your Fx pedal can be very frustrating too. Glad that it helped! 😃👍. Have a great day!
@RukiAlvarez
Жыл бұрын
You are a saint in my eyes
@JoelYeoh
2 ай бұрын
Aww..glad it helped! 🙏😊
@thumper300zx
21 күн бұрын
I broke off the tip on the other side of the cable so I could compare the hole size. Then I had a set of diamond coated grinders (made for dremel/high speed tool). Found a size that fit but had to be twisted a bit. Grabbed on and then put a little torque/lean on it while pulling it out. Also had omto do as others said to push the retaining contact/clip out of the way. Also used a little gravity to help (so from an inverted position. Darn things. Don't let people trip over your cables 😅
@jipvankakerken
2 жыл бұрын
Thank you so much! You saved my amp :D
@JoelYeoh
2 жыл бұрын
You're welcome brother! Glad to hear it helped 🙏😀
@chedflordeliz3252
8 ай бұрын
You are a hero. Thank you so much for sharing this!
@JoelYeoh
2 ай бұрын
You're welcome! Glad it helped 👍😊
@dundeedolphin
Жыл бұрын
Thanks Joel. Hopefully that works for me. 👍
@JoelYeoh
2 ай бұрын
You're welcome. Hope it helped 👍😊
@Viktore_Atlantean
Жыл бұрын
Wow. This is actually THE way.
@JoelYeoh
2 ай бұрын
Glad it helped!
@Blessonch
10 ай бұрын
Thank you so much Bro, God bless you ✨❤️
@jeremynon
9 ай бұрын
The screw idea worked but the qtip didnt Any idea how to get rid of the second part
@richfrank3105
2 жыл бұрын
Thanks alot, you saved my fender amp
@JoelYeoh
Жыл бұрын
You're welcome Rich! Glad that it helped and didnt throw your Fender amp in the bin. 👍😂
@andrewtroup4956
2 жыл бұрын
You saved my amp, thank you!
@JoelYeoh
Жыл бұрын
You're most welcome Andrew! Glad it helped 👍😀
@Jamilkhalili
10 ай бұрын
Worked for me.. Thanks !!
@petrduchac2580
8 ай бұрын
Thanks I was out of ideas.
@punaraseshani
8 ай бұрын
Bro your a life saver thank you very much❤
@JoelYeoh
2 ай бұрын
Glad it helped!! 👍😊
@jhayzgaming
2 ай бұрын
Thank you very much very effective☺️👌
@JoelYeoh
2 ай бұрын
Glad to hear that! You're welcome 😊 🙏
@handro4319
2 ай бұрын
Thank You!
@JoelYeoh
2 ай бұрын
You're welcome!
@Jakelliott
Жыл бұрын
Welp, when I put pressure on the screw, I must have used too much force because I heard a click and then the tip popped out the back of the jack and went spelunking down the amp. I never recovered it, but the input works again so all's well that ends well. Thanks!
@JoelYeoh
Жыл бұрын
Glad to hear it turned out well in the end 👍. Keep rocking now 🎸🎶🤘😊
@mauromauro444
Жыл бұрын
you’re a real one for sharing this tip haha thank you
@JoelYeoh
2 ай бұрын
Most welcome! Glad it helped😊👍
@D_Moore
11 ай бұрын
Oh thanks man!
@koosdeklerk5585
2 жыл бұрын
Dude, you just saved my sons arse!!
@JoelYeoh
Жыл бұрын
Glad it saved his arse!! 🙏😂
@user-qo4yg6re8w
6 ай бұрын
life saver!
@lksample
Жыл бұрын
It worked, thanks!
@JoelYeoh
2 ай бұрын
Glad to hear!
@ShibuDaniel-ks8ni
Жыл бұрын
You are a life saver mate! Thank you!
@JoelYeoh
Жыл бұрын
You're welcome Daniel!! Glad to hear it worked for you too 👍😊
@5DLit
5 ай бұрын
Brilliant!
@BLACKCOVERS
2 жыл бұрын
Cool DIY tip, Joel✌😀
@JoelYeoh
2 жыл бұрын
Thanks for checking it out Ingo! 😀
@BobGreenOnline
2 жыл бұрын
I used an m3 tap from a tap and die set (used to cut threads in metal) gripped the metal tip that was stuck perfectly, out in 5 seconds after trying tweezers for half an hour.
@JoelYeoh
Жыл бұрын
Glad to hear that! 👍😊
@martinsherwin1908
2 жыл бұрын
would reverse engineering this for tipstuck deep in 1/4 trs input work
@IsraelMaldonadoMusic
4 ай бұрын
Thank you !! It worked 🙂
@JoelYeoh
4 ай бұрын
Glad to hear! 👍😊
@papuyonic
Ай бұрын
thanks! great video!
@naelurie
2 жыл бұрын
You save my ssl sir thanks 😭😭😭
@JoelYeoh
Жыл бұрын
You're welcome Nathaneal! Glad it helped 🙏🙂
@Adrian_Franco
Жыл бұрын
god tier tutorial
@blancdolle2246
Жыл бұрын
oh god, you save me! thank you!
@JoelYeoh
2 ай бұрын
You're most welcome!
@fmmonkey8274
Жыл бұрын
you saved my life 3:05am
@JoelYeoh
Жыл бұрын
Glad to hear and you're welcome 🙏.
@SayangiRahmatiISTRI
2 жыл бұрын
nice mechanic tip bro Joel : )
@JoelYeoh
2 жыл бұрын
No prob. Thanks for checking this out Adam 😀
@landonweb
2 жыл бұрын
Thanks man! Very helpful!
@JoelYeoh
Жыл бұрын
You're welcome Landon! Glad it helped 👍🙂
@nishanmukhia4348
3 ай бұрын
Thanks for the trick..🙏🙏🙏
@JoelYeoh
3 ай бұрын
Welcome, glad it helps 😊🙏
@Antmen1
Жыл бұрын
Thanks
@petrosmpampalis6097
2 жыл бұрын
I had a very bad experience with My DENON Amplifier when i broke Sennheiser headset jack and IT WAS STUCK inside!! Very deeply... In the beggining,i used glue!!! Wrong! Very thin pliers.. Nothing! I was desperate that i had to move the whole Amplifier to an expert😰😱 Suddenly i had an idea: Drill bit!! The idea with screw is a good one but i suggest DO NOT USE Screwdriver cause you don't have the feeling needed for such sensitive operation.. A) I saw inside Denon jack with a magnifier lense and light to see what has been left.. B) I used a drill bit No 2(i think 3 maybe better) which i started to screw with ONLY my fingures force.. When i felt it had stopped,i pulled back the drill not exactly in straight line! And the miracle came: IT CAME OUT!!! I replaced the broken jack with a new one: Perfect!!! Finally, KZitem is a big helper😉 Have a nice time, 🇬🇷🇬🇷🇬🇷
@JoelYeoh
Жыл бұрын
Glad to hear it worked out for you! Thanks for sharing all the insights. Keep making music 👍😃
@petrosmpampalis6097
Жыл бұрын
@@JoelYeoh Hi Joel! Glad to hear😃 It's a good thing to share experiences through KZitem platform. Best wishes and music!!
@himbo123
Жыл бұрын
Wonderful, thank you, solved my problem. ✌️
@JoelYeoh
2 ай бұрын
You're welcome!!
@BoomJitsu
Жыл бұрын
You friggin rock man! Thank you!
@emnimen7948
Жыл бұрын
any alternatives from the cotton bud ??
@JoelYeoh
Жыл бұрын
Hi there. I guess maybe you can try a thin wooden stick..but I believe cotton bud would be easier to find 😉
@jennika3255
2 жыл бұрын
Thank you so much!!!!
@JoelYeoh
Жыл бұрын
You're welcome!!
@dundeedolphin
Жыл бұрын
Anyone know what size of screw you used?
@ForesterJo155
2 күн бұрын
I couldn't remove the tip of my jack from the NUX amplifier; it's stuck inside.
@armandadkhodaei4926
Жыл бұрын
Thank u
@LAROSEROYCE
Жыл бұрын
Worked… thumbs up!!!
@edwnsoto18
Жыл бұрын
Thanks a bunch
@JoelYeoh
Жыл бұрын
You're welcome Edwin.
@samedysamedy
9 ай бұрын
Life saver ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
@JoelYeoh
2 ай бұрын
You're most welcome👍😊
@Mikkelkirkedahl
Жыл бұрын
Thank you SO MUCH! :)
@terrybrown797
Жыл бұрын
Does not work for all types of jacks mine was built different than the one showed in this video somehow managed to get it out with a pair of long Surgical tweezers but took a while to get a good bite to pull it out
@JoelYeoh
Жыл бұрын
In this video, it was a 1/4" Jack that is stuck like any instrument cable. And yes, took a little while for the screw to get a good bite. Well, hope you got it out eventually.
@veronica.armstrong
Жыл бұрын
You saved me!!!!! Thank you!!!
@JoelYeoh
2 ай бұрын
You're welcome! 👍😊
@aurelioig
Жыл бұрын
Cotton didn´t work for me! It was very stuck! I took parts from other plug.... than I hammered it into the plug and then I had success.
@rmpelkey1
Жыл бұрын
brilliant!!!!!!!!!!!!!!!!! ya just saved me a few hours of work and a couple a dozen F-bombs Thank you Joel.
@fantasyfantasy5714
Жыл бұрын
PLEASE HELP my headphone jack is struck deeply in the audio port. I tried taking it out with a needle but it came out like what you showed in the video when you used the screw except for me the metal/plastic? skin came off and rest is still deep inside and I am unable to take out the rest as what ever was in first part is sticking out (it is only wire with thin layer or coil or metal around it) so please help
@se1renes
Жыл бұрын
i have a same problem currently.i tried everything and i want to ask did u took it out and if yes how?
@aboutfathurv9692
Жыл бұрын
Are u using glue on that cotton bud? 3:32
@EnzoRapacciuolo
2 жыл бұрын
Hi, very good! Like 6.
@JoelYeoh
2 жыл бұрын
Thank upi bro Enzo!
@rammsteinlj
Жыл бұрын
I will buy you a house someday. Even if you already have one, you will get another one.
@shogunemperor
2 жыл бұрын
cool man
@JoelYeoh
2 жыл бұрын
Thanks bro! 😀👍
@shogunemperor
2 жыл бұрын
@@JoelYeoh 👊😘
@stevengorum2727
Жыл бұрын
HOW does that happen ? I took two pairs of channel locks and I tried and tried to break the tip off ( with out bending ) and it's impossible !!!! If I can't purposely break one after 10 minutes of trying.. and then another 10 minutes of trying with a lot of pressure but not enough to ban to ruin it I couldn't take that tip off to save my life..... For an hour I tried with two pairs of channel locks.... So how the hell is one of those supposed to break in the back of a guitar effects or in a guitar amp ...... I have played professionally 7 nights a week for 30 years in clubs all over Los Angeles Phoenix Arizona Nashville Tennessee Chicago the Aleutian Islands the Bering Sea.. and I don't understand how any of those can ever break inside of a unit if I can't break it on purpose and I rebuilt my first engine when I was 15 years old I know what I'm doing.... they don't !!!!!
@shayansghghaderi1071
Жыл бұрын
I love u
@JoelYeoh
Жыл бұрын
You are loved! 🙏🙂
@jesguitarist
2 жыл бұрын
Nice hack bro 😁😁😁
@JoelYeoh
2 жыл бұрын
Thank you bro for checking it out! Hope it's helpful or helpful someday 👍😂
@jesguitarist
2 жыл бұрын
@@JoelYeoh It is really helpful, never thought of this kind of hack.hehehe nice one! :)
@stevengorum2727
Жыл бұрын
If I could not break one of those on purpose with two pairs of pliers after an hour? How do they ever break inside of a unaffectionate just trying to plug it in how do they break ???? THEY DONT !!!!!!!!!!!!
Пікірлер: 176