3 minutes in and I know this is EXACTLY the video and tutorial I needed. THANK YOU!
@C3Stingray
2 жыл бұрын
Glad it helped you! Thanks for watching.
@dchawk4x
2 жыл бұрын
Best video I’ve seen for a corvette tear down. 👍
@C3Stingray
2 жыл бұрын
Thanks. I try and give all the information I would want if I were watching a video on how to take something apart. Thanks for subscribing.
@jackdawg1474
2 жыл бұрын
I have literally been looking for months on how to change the fog lights on my 85 Corvette and upgrade them to hid bulbs but literally everyone has newer model c4 where you go from underneath. I had no idea that cone could be removed and that should make reaching in alot easier thank you for the great video
@ahmedrizg
Жыл бұрын
you cant imagine how helpful was this video , thank you sir for your time . I subscribed to your channel please keep up the good work .
@thaddeauscaldwell7101
5 ай бұрын
Great video. Thank you for the tip , on using the 10mm 45 ° degrees wrench .You make it look easy to remove the front bumper but i know its time consuming. Need to remove the front bumper on my ' 90 Convertible to install a body kit .
@howifixit6206
2 жыл бұрын
I'm taking mine off now. When I painted my '85 2 tine bronze 6 years ago I didn't know how to take the bumper cover off. Well now I do. Thank you. Here I go
@C3Stingray
2 жыл бұрын
Good luck.
@bigswag3319
2 жыл бұрын
been coming back to this - i have a red 89 and NEEDED IT!!!
@garypiont6114
6 ай бұрын
The absolute best car part video Thanks.
@dukeman7595
4 ай бұрын
Best how to bumper removal on you tube. Thank you vry much..
@dawndark1232
2 жыл бұрын
Great informative video. I was actually looking at my fog lights and thinking what's involved in taking them out. Didn't know the whole front bumper had to be removed. Thank you for information
@SapphirePhoenix1981
Жыл бұрын
Very helpful video, 100% accurate, follow his steps, exactly, and it will be at easy easy un-installation! Thank you!
@indiomonk123
2 жыл бұрын
Thanks for the video. I tweaked my front bumper on a 94 c4. This will help me straighten it out. 👍
@mattcoppola848
2 жыл бұрын
Thanks. This helped. I wish the passenger side fog light assembly didn't break. That's the one I need!!
@TFGrey1980
2 ай бұрын
Great video. Thanks!
@bruceburton8315
6 күн бұрын
thanks for the info
@oldnight4572
Жыл бұрын
Can still use assembly. Glue & longer screws to attach back together. Because when screwing back on extension for the fog lights it will hold in place anyway
@christopherlucas6209
Жыл бұрын
Awesome....thank you!!!
@C3Stingray
Жыл бұрын
Glad you liked it!
@makosharkcnc7730
2 жыл бұрын
helpful video thanks for making it
@howifixit6206
2 жыл бұрын
With my '85 the 12x 10mm screws at the top rail of the bumper cover are exposed to get a wrench onto!
@jeffspicolli593
Жыл бұрын
Put some masking tape on the front edge of the hood for protection.
@nknez76
2 жыл бұрын
Thanks! Huge help
@C3Stingray
2 жыл бұрын
Glad it helped. Thanks for subscribing.
@scottpolski5506
Жыл бұрын
I'm not sure how often you check these comments, but I'm hoping you or someone who watches this video can help me. I hit a deer last fall with my 92 Vette and the only damage to the car was the passenger side flood light/turn signal housing and lens were broken. I have been looking for replacements for these parts but have not been able to find anything...there has to be some way to either get a usable replacement or have something fabricated. Any help or advice would be greatly appreciated
@C3Stingray
Жыл бұрын
No one makes them anymore. I used to work at Just Corvettes and the owner had the rights to make several Corvette items including those lights, which he did twice while I worked there 2 years, and he had to pay a licensing fee on every one he sold. He would only do short runs, a couple hundred, and they would sell out instantly when they came in. He closed the building down and is semi-retired, I don't think he does any reproduction work anymore. Your only chance is to find used ones. I have a couple but both need pieces plastic welded on the back, the lenses are fine. Just haven't gotten around to doing it.
@Soupy59
2 жыл бұрын
Did you fix the broken lamp?
@C3Stingray
2 жыл бұрын
Need to plastic weld it. Haven't messed with it yet but I think it is repairable.
@Soupy59
2 жыл бұрын
@@C3Stingray yes absolutely I got my passenger door plastic welded it is so much better than when I removed it!
@MW-nOttawa
11 ай бұрын
So its not possible to change just the bulbs without removing the whole bumper? Drag
@chrispompano
12 күн бұрын
Found a video. Its easy w/o bumper removal. m.kzitem.info/news/bejne/zKR7nYeNcpVeh34 But don't use the LED the guy used. Photometrically will not fully illuminate the reflector. Best to use a 2357A amber bulb from Philips or Bosch if you can still find them. The original 2057A bulb is 24cp/1.5cp (candlepower). The 2357A is 30cp/2.5/cp. I would also wire in a DRL-1 made by Web Electric. It makes the bulb into an amber DRL & uses the brighter turn element (30cp) to be on constant & will still be able to flash for turn signal on the bright 30cp element!!!! The dim element 2/5cp is no longer used. This module is the best kept secret in the lighting industry for 20yrs & was never marketed properly, but lightning experts & gurus know its capabilities.... There are a few old vids about it & on CandlePower Forums if you look it up. Amber DRL is far more conspicuous than white light & looks cooler also! The only LEDS to use are expensive & should be more compatible match to the o.e. reflector. Vleds, or GTR I-LED are the best technology to reproduce the light spread into the reflector but are expensive.
@matthewtaylordeoppressolib7141
Ай бұрын
Why does title say c4?!
@steveedwards4868
2 жыл бұрын
i need a c-4 hood
@loganhansen1549
2 жыл бұрын
Dang bro that’s gonna be tough. Did you ever find one?
Пікірлер: 36