As you can see, by removing dB killer your bike will turn from green to red 😂 too bad dude
@danielmahli7564
3 ай бұрын
Even tha exhaust changed fron full carbon to tip carbon only
@Creedstarsrr
3 ай бұрын
Some of them you to drill out the pop rivets remove end part of the carbon fibre because the bolt is welded to the exhaust
@zginqe630
6 ай бұрын
Did mine Last night easy enough job
@renefahrleitner8405
9 ай бұрын
Where'd you get the plug from?
@vasokrunic
3 ай бұрын
Is it the same way on xadv 750 2023? Akrapovic
@CCasyno
Жыл бұрын
You just magically had the drill spot and was able to break the spot weld through that hole??
@04_Unknown_01
9 ай бұрын
where i can find that small hole rubber cover
@leeloan1107
6 ай бұрын
je cherche aussi 😢😢😢
@maximedenoel5750
3 ай бұрын
C est exactement ce que j ai fait sur ma z1000r de 2018... l embêtant s est toujours de bien récupérer la visse...😂
@ciclistateppista
Жыл бұрын
A me me parono due marmitte differenti, pure la moto da verde diventa rossa 😂
@daveydave2265
Жыл бұрын
What size drill bit was that? And was it hss metal or wood bit?
@daveydave2265
Жыл бұрын
???
@sergioandrada922
Жыл бұрын
Preguntó que diámetro de broca utilizaste. El tapón de goma se compra en tienda o por Aliexpress??.. se puede limpiar con gasolina el interior del silenciador o punta para ayudar a descarbonizar?? Gracias, saludos desde Buenos Aires Argentina !
@rzrpwr
4 ай бұрын
You gotta be fucking kidding me. I'm glad I didn't order it.
@lars8124
5 ай бұрын
the bolt is now welded onone point, so it doesnt work anymore!!!
@igbrmjoshua
3 ай бұрын
Where is it now
@lars8124
3 ай бұрын
@@igbrmjoshua same position but welded. You need a dremel Tool
@iPankBMW
3 ай бұрын
Was not weldet for me.
@stipple703
Ай бұрын
Not working for the 24 model! They welded the bolt to the inner pipe, you can remove the whole back tip by drilling al the rivets in the back and then you can reach the bolt
@YAAQOV_JJ
7 күн бұрын
Are you serious ? So I cannot do this in 2024 model ?
@stipple703
7 күн бұрын
@@YAAQOV_JJ in Belgium (Europe) models NO, you can but it’s a bit more difficult 😎
@YAAQOV_JJ
7 күн бұрын
@@stipple703 im from Europe too, Slovakia, very small country, I uphraded my headers for full akrapovic system, but I want to delete db killer, its 2024 model 😳
@stipple703
7 күн бұрын
@@YAAQOV_JJ yeah so like I said, easiest way is to drill the rivets out of the top piece, then you can get the tip of to reach the small bolt.
@YAAQOV_JJ
7 күн бұрын
@@stipple703 but if screw is welded, what I can do ? Nothing, maybe permanently cut it, but I was considering to keep db killer, for longer dostances maybe
@wrenchntwist133
3 ай бұрын
That's not the correct way to do it ... best way is to drill out the rivets and pulling the exhaust appart
@motardauvergnat8172
11 ай бұрын
😂😂c’est pas le même pot du début de la vidéo 😂
@ayrtonlefrancoise1237
10 ай бұрын
Oui mdr',on passe d'un Z900 à un z1000 😂
@redstoneholmes7945
Жыл бұрын
dont remove db killer it will damage your bike
@Aries-us9cy
7 ай бұрын
Not true wut so ever. U can run straight pipe just the same and ur bike will be just fine. Even My neighbor has had a zx10 for a few years running straight pipe and his bikes just fine. It’s a myth
@rzrpwr
4 ай бұрын
It will not.
@mariol1436
3 ай бұрын
@@Aries-us9cydepends, most modern bikes shouldn’t have any issues but my ZX9R doesn’t like being straight piped, being carbureted it seems to bog when i hit the highway. No issues otherwise.
Пікірлер: 35