Thanks for the detailed instructions! Made my life so much easier!
@carllembke6902
2 жыл бұрын
Fantastic video, and i am now looking forward to the project. Thanks for being so good!
@gregp1409
2 жыл бұрын
Dropped a windshield anchor nut while changing it out. I was hoping to fish it out with a magnet but couldn't find it. Your video saved the day by showing me how to remove the fairing and retrieve my nut. Thank you very much!
@DaveGustafson-m4f
5 ай бұрын
Great video I was able to use it to get to the horn on my 22 Pursuit. The only thing I would add is if you have hard lowers you will not be able to get the lower 6mm screws. You either have to remove the lowers or a far easier move would be to use a 6mm ball end allen head. This is what I did and the screws came right out
@GraemeBlore
Жыл бұрын
Excellent video, audio, & camera work. Made it very clear and easy to follow.
@joexray77
2 ай бұрын
Appreciate the video. Straightforward and not a lot of video hijinks. The way to do a video. Thanks.
@AC-mh5vw
3 жыл бұрын
A very good and clear video. I just put a telephone cable in the usb and was able to pull this cable through to the left side of my handlebar. Now my phone sits on a stand on the left side. Thank you very much.
@bigneil8888
3 жыл бұрын
Exactly what I needed thanks guys, subscribed
@mrdude3540
9 ай бұрын
Awesome video bro. Much appreciated
@drumvid43
Жыл бұрын
Great video and I subscribed! Can you do a video on replacing the battery charge port on the right hand side?
@chipjohansen8132
Жыл бұрын
Thank you very much. This helped immensely!
@KerryAnderson-o3r
8 ай бұрын
Great video thanks but just a quick question, where the stock standard horn is located, do you think there is enough room to fit a Denali Sound bomb horn? Thanks in advance.
@davidbarnard771
2 жыл бұрын
Excellent-takes scary project to easy!
@biofractal78
4 жыл бұрын
Thank you guys... You got a new subscriber
@jpcycles
4 жыл бұрын
thanks!
@biofractal78
4 жыл бұрын
J&P Cycles Guys guys.... You sell ShowsChrome accessories. I bought my back reform my 2018 GL1800 and it was awesome. I'm not sure if that is a J&P Cycles brand or what but PLEASE tell them to hurry up and make stuff for the 2020 Challenger... Indian prices for accessories are RIDICULOUS 😡 My guys and I need Backrest, front Crash bars, Sissy bars w/ luggage racks etc etc. We are counting on you guys 😄😄😄
@jpcycles
4 жыл бұрын
@@biofractal78 :D
@biofractal78
4 жыл бұрын
J&P Cycles LOL what is that supposed to mean? Hehehe Again I was looking for a direct way to contact them. I love the quality of their products. Very few aftermarket products are available for the challenger. I understand that is only 4 months since the official launch. Are you able to send our message to them?
@biofractal78
4 жыл бұрын
I guess is a no?
@poppysadventures2020
Жыл бұрын
Thanks, this video helped out.
@FuriousPrawn
6 ай бұрын
Just a quick question, how does the plugs for the lights come apart, do you twist or do you squeeze the clip to separate the leads to the headlights and turn signals, it was not quite clear what you did to detach the leads.
@giovannicalicchio8277
2 жыл бұрын
Can the inner fairing be removed alone? Or must I take off the outer fairing also?? Thanks
@jpcycles
2 жыл бұрын
You have to remove the outer before you can remove the inner fairing.
@opel1954
3 жыл бұрын
I would like to see more videos of work on Indian bikes. Thanks.
@luisborgen264
2 жыл бұрын
This just saved me over $100
@thphatboi
3 жыл бұрын
Nice!!! What did you torque the bolts to???
@gregp1409
2 жыл бұрын
t6:15 36 inch pounds
@frederickeng135
Жыл бұрын
thank you
@tibiprodan
2 жыл бұрын
What kind of torque wrench is that?
@pawetrynda3188
5 ай бұрын
How to take off lags?Challenger 2023
@moto_cal_
3 жыл бұрын
Can you tell me how to remove the bezels around the turns on the fairing? Same as the headlight?
@jpcycles
3 жыл бұрын
Never removed them but I would imagine its relatively similar.
@Davidthegnme
3 жыл бұрын
I just bought a 2020 Challenger. im wondering is there is a dead space inside the fairing? that can hold my GPS device. i have the monimoto.
@jpcycles
3 жыл бұрын
possibly in the top corners. Check around 4:30 in the video for a look inside.
@tibiprodan
2 жыл бұрын
Subscribed
@soga77
4 жыл бұрын
MVP
@Phntm27
4 жыл бұрын
perfect bike... Dreadful fairing
@youtubecensorshipsucks6779
4 жыл бұрын
Is it pretty to access for handlebar swaps once this fairing is off or do you have to remove more to reach the handlebar mount?
@BaggerJay
4 жыл бұрын
You don't need to remove the fairing to swap bars. There are a few videos on it. KST has a good one.
Пікірлер: 39