Great Video. Just bought a lightly used John Deere E140 with a snow plow on it. It came with the deck off. It wasn't obvious how to put the deck back on. Thank you.
@JohnsonsSmallEngines
2 ай бұрын
I'm glad it was helpful and hope all went good.
@benjenkins3507
2 жыл бұрын
Life saver. First time taking off a deck and replacing a belt. Thank you for the video
@JohnsonsSmallEngines
2 жыл бұрын
Hi Ben, I'm glad it was helpful and thank you for the kind comment.
@MrWaredog
4 жыл бұрын
Thanks for taking the time to make this video. Very straight forward and clear explanation unlike the semi worthless operator's manual that ships with the tractor. It's guys like you that make youtube great. Thanks again.
@stevebusby6618
Жыл бұрын
I've had my E140 for three or four years now and was always afraid I would not be able to remove the mower deck because of the electric PTO. Thanks to your video, I was able to remove it clean it (about 1-1/2 hours; the deck washing system only did so much), and reinstall it. The only problem I encountered was that I was not strong enough to get the spring-loaded pulley for the belt to move far enough to get the belt back onto the PTO. I had to use a vise pair of vise grips on the pulley's belt guard, then it was easy. Now that I know how easy it is, I'll be doing it much more often. Thank you!
@JohnsonsSmallEngines
Жыл бұрын
Hi Steve, I’m glad this was helpful enough for you to do it yourself!! If you take your time all is fine:) Thank you for watching and the kind comment. Please give this a like, subscribe and tell your friends about my channel to help it grow. It would be greatly appreciated.
@needa24
4 жыл бұрын
Awesome video. Thanks. Way easier than I anticipated.
@paulthomas3813
3 жыл бұрын
Thank you for your videos. I just watched again the videos on the d140 deck removal and belt replacement. Both are very good and answered all my questions. Keep it up.
@JohnsonsSmallEngines
3 жыл бұрын
Thanks for watching! I'm glad they were helpful. I have how to install the blade belt coming out Friday afternoon eastern time.
@hjboots
4 жыл бұрын
I sure would like to see the camera you used if possible and yes excellent how to video . Clear and right to the point. Thank you
@curtisforbes8650
4 жыл бұрын
Your explanations are really easy to follow.
@Lupotkd
11 ай бұрын
Thank you. So helpful. I wish I could do it that fast. Mine don’t come off as easy. Rolling belt off is easy. Mine is too tight to roll back on as easily as yours.
@JohnsonsSmallEngines
11 ай бұрын
Hmm, are you using a OEM belt? (origanal equipment manufacturer). Check out this video at the 1:17 mark. This may help you next time. kzitem.info/news/bejne/22-smJmqbHiWn4o.
@pretzelogic2689
4 ай бұрын
Fantastic. Such a great help. I thought I was really in trouble but... this is just great. Thanks so much.
@JohnsonsSmallEngines
4 ай бұрын
Glad it helped! Thank you for watching and the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated.
@sterlingmuth548
4 жыл бұрын
This is one of the best videos I have seen so far. Thank you
@raf249hg
4 жыл бұрын
Thanks. Extremely timely and useful
@mitsko42
2 жыл бұрын
Thank you Brad, you just made this look easy.
@JohnsonsSmallEngines
2 жыл бұрын
Hey Mike, I’m glad it was helpful and thank you for commenting. I have removed a few hundred thousand through 30 years :) Thank you for watching.
@maxmott7489
4 жыл бұрын
Right on time perfect explanations.
@gerardoacevedo5182
4 жыл бұрын
I needed this. Thank you. 👍💯
@billlewis8392
3 ай бұрын
Thank you good sir! I needed this! 😅
@JohnsonsSmallEngines
3 ай бұрын
I'm glad it was helpful and thank you for the kind comment! Please give this video a like and share my channel to help it grow. It would be greatly appreciated!
@clarenceea3472
4 жыл бұрын
the trick to sliding the belt off the front pulley is to put a 15mm closed end wrench on the tensioner pulley and turn clockwise until it gives enough slack to take the belt off. do the same to put it back on!
@Bwolber
4 жыл бұрын
Holy crap, awesome video. Thank you.
@suleskes
3 ай бұрын
Great video. Worth actual $$. Thank you.
@JohnsonsSmallEngines
3 ай бұрын
I'm glad it was helpful! Thank you for the kind comment and supporting my channel! It is greatly appreciated!
@abiathararba7361
3 жыл бұрын
*GREAT video... Thanks for taking the time... God Bless You and and Your Family!
@JohnsonsSmallEngines
3 жыл бұрын
I’m glad it was helpful!
@glennfriant1817
4 жыл бұрын
Thank you. Great video
@roadapplemax
3 жыл бұрын
Good job. Clear instructions
@JohnsonsSmallEngines
3 жыл бұрын
I’m glad it was helpful!!
@rondail5675
4 жыл бұрын
good video DIY, How-To
@mkb3580
Жыл бұрын
Good job my friend…
@JohnsonsSmallEngines
Жыл бұрын
I’m glad it was helpful. Thank you for watching and the kind comment.
@jjthejet69
2 жыл бұрын
900th Like :) Thnx For A quick not dragged out easily understandable video that helped with my D140 ..PEACE
@JohnsonsSmallEngines
2 жыл бұрын
You’re welcome! Thank you for watching. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated:)
@SyzygyKNH
4 жыл бұрын
Very helpful!
@aplong1911
2 жыл бұрын
Thank you for sharing
@JohnsonsSmallEngines
2 жыл бұрын
I'm glad it was helpful. Thank you for watching and commenting.
@joetart9905
6 ай бұрын
Thanks, dude 👍
@JohnsonsSmallEngines
6 ай бұрын
I'm glad it was helpful! Thank you for watching and the kind comment. Please give this video a like and share the channel to help it grow. It would be greatly appreciated!
@thomass5740
2 жыл бұрын
Right to the point! Thanks!
@JohnsonsSmallEngines
2 жыл бұрын
You're welcome! Please give this video a thumbs up and tell your friends to help my channel grow. It would be greatly appreciated.
@daguzify
4 жыл бұрын
Thank you
@iluxionxz
4 жыл бұрын
Great video
@marilynswan282
3 жыл бұрын
Very well done!
@JohnsonsSmallEngines
3 жыл бұрын
Thank you, I'm glad it was helpful, thanks for watching and commenting :)
Пікірлер: 55