Please, everyone needs to buy Garage Built Honda decals. This is the BEST channel ever. I am currently building and swapping 89 civics. He knows allot!!!
@GarageBuiltHondas
6 жыл бұрын
+Robert Shawiak thanks for the comment Robert! It means a lot to hear it!!
@aoclive6710
5 жыл бұрын
Robert Shawiak I’m new where can I buy
@GarageBuiltHondas
5 жыл бұрын
garagebuilthondas.bigcartel.com/
@Blackkrd
6 жыл бұрын
After the A/C success I checked out your other stuff and found this. It is perfect for the work I am going to do on restoring my door panels. This shows me exactly how to remove them and will make things much easier. Thanks!
@GarageBuiltHondas
6 жыл бұрын
Love to hear it!
@ambidexstress
7 жыл бұрын
Man your KZitem channel is the most helpful channel
@GarageBuiltHondas
7 жыл бұрын
andrew mendoza Really appreciate that comment, that's my goal for the channel Andrew!
@ambidexstress
7 жыл бұрын
Jon Widmer no problem man and yeah your channels good because you cover a lot of things for an ef that most people don't even care for
@Smokeout89
7 жыл бұрын
andrew mendoza this guy is legit lol he's like a Ef/crx master lol
@RonnieGonzales520
7 жыл бұрын
another great video Jon! super detailed keep up the great work you will b at 10K subs in no time.
@eballon86
7 жыл бұрын
dude your videos are awesome! it actually motivated me to do an exact copy of your build on my 91 hatch. same bolt on but I did the obd1 conversion with the p75 ecu and ys1 non lsd trans... keep it up man!
@GarageBuiltHondas
7 жыл бұрын
Efrain Ballon awesome, let's see it man!!!
@eballon86
7 жыл бұрын
Jon Widmer I want to get it running first. The swap is done but I'm having little shit pop out and having to fix it. Btw, I saw that on mine the steering column has play from side to side. Looking at it has cardboard wedge in (I guess last owner did that to reduce the play) right in the bracket that holds it in. Is this a common thing on efs?
@GarageBuiltHondas
7 жыл бұрын
Efrain Ballon I've never experienced it and I've had a handful of EFs. Check to see if all of the brackets/hardware is present. Maybe something is missing so they shoved the cardboard in there to try and fix it.
@GFK602
4 жыл бұрын
Thank you for this video. Made pulling my driver side door and door panel so much easier.
@GarageBuiltHondas
4 жыл бұрын
You're welcome, glad to help!
@xThe_Caveman
7 жыл бұрын
awesome video once again Jon black dragon looking better every time
@johnw1747
5 жыл бұрын
How many times are you gonna save my ass John haha
@GarageBuiltHondas
5 жыл бұрын
Hopefully as many as possible!
@chrisflores1448
4 жыл бұрын
F dd
@IntegraDIY
7 жыл бұрын
Good tip using the floor jack to help raise the door!
@GarageBuiltHondas
7 жыл бұрын
Integra DIY I've got to, I'm always solo in the garage!
@kevmtz1901
7 жыл бұрын
Jon thanks so much.... I already take apart everything and adjust my door, now it closes so smooth... and I already order the rack end bushing I hope it fixes my problem
@GarageBuiltHondas
7 жыл бұрын
That's sweet! You can get a new rack for $98 off of ebay. I just got one for my Si and installed it the other day. Car feels excellent now with the new rack.
@kevmtz1901
7 жыл бұрын
Jon Widmer I was wondering Jon, my Ef makes a lot of noises inside the car... like rattle noises, plastic pieces moving, I already tighten up every single bolt, put new clips like the ones on the door panel, but I can't delete the noises, and my question is, every Ef is like that? I was searching in Google and some people said that an EF that doesn't make noise is not an EF lol... If you can help me with that or post some videos later I'll appreciate it, and I hope the rack bushing fixes my rack problem, if not I'm gonna need a new one
@jacobhald1377
Жыл бұрын
Great video! Will be a great help for tomorrow when I'm going to align my sagging door! ^_^
@GarageBuiltHondas
Жыл бұрын
Hope it works!
@jacobhald1377
Жыл бұрын
@@GarageBuiltHondas It did! I think at some point in the cars life, the drivers side door had been open, and the car have either rolled, or been driven in reverse, hitting something that made the door slide forward towards the front end of the car. Made the door sag, and not close right, as well as making it so that you could hear a lot of road noise when driving, coming from the b-pillar area. After adjusting it, i managed to get rid of all those problems. Amazing! ^_^
@baddestburrito4718
7 жыл бұрын
So grateful for this. I've always wondered what lived in that mystery zone inside the door. I was really surprised to not see any kind of side-impact protection bar in there. No wonder the EF/CRXs are so light. *nervous laugh* No wonder people have told me for years, not to get T-boned.
@GarageBuiltHondas
7 жыл бұрын
Baddest Burrito There really isn't, there is a small beam behind the molding but it's not super thick.
@Socsom
7 жыл бұрын
I was waiting for you to make a video on how to remove the door panel etc. But i would be really appreciated if you can show us a tutorial on how to remove or adjust the window when it is off track etc. Thank you
@GarageBuiltHondas
7 жыл бұрын
Socsom I will soon, let me find a decent regulator for my passenger door and ill explain it!
@blakebutler9236
3 жыл бұрын
@@GarageBuiltHondas any luck with that video?
@GarageBuiltHondas
3 жыл бұрын
Never made it, sorry. Ended up getting rid of this shell and working on a different one.
@Boxycivic92
7 жыл бұрын
thank you for all your great videos.
@GarageBuiltHondas
7 жыл бұрын
mugenfan1000 thanks for your support, greatly appreciated!
@juanmarquez1049
6 жыл бұрын
Good informational video, does someone know the exact clips he used as replacements for the door panel if someone can put a link down that'd be dope 😎
@GarageBuiltHondas
6 жыл бұрын
Go to eBay, type in Honda door panel clip. They will pop up in bunches!
@juanmarquez1049
6 жыл бұрын
Thanks
@flacorodriguez5798
7 жыл бұрын
Really good video master ! Could you make a video how to install racing seats like the one u got in ur track car ?
@GarageBuiltHondas
7 жыл бұрын
Vidal Rodriguez lol master! I want to upgrade to a newer seat. when I do, I'll make a video on the old and new.
@gregneilsen2967
7 жыл бұрын
Thanks Jon , cheers Greg
@fourleafcloveer5011
5 жыл бұрын
Very helpful video. Great detailed instructions.
@GarageBuiltHondas
5 жыл бұрын
Thanks
@lenny6485
4 жыл бұрын
Thank you 🙌🙌
@GarageBuiltHondas
4 жыл бұрын
Welcome
@jwaid941
7 жыл бұрын
Great videos dude! Just found your channel today and have watched a few. I whole-heartedly agree with Password:CRX... really motivated to take apart and fix various things on my car. So I wanted to ask how the weld on the door check was holding up. I was thinking of doing the same for mine (it was broken when I got it) Also, can you confirm if the arm of the door check (the one inside the door) is that thing spring loaded? I read somewhere that it will get "pulled back in," just slightly, when the pin is removed. But that you can easily push it back out when the door panel is off - in order to get the pin back in. Many thanks for the videos and keep them coming!
@GarageBuiltHondas
7 жыл бұрын
Jason Waid Jason, thanks for checking out my channel, I really appreciate the support! The weld is holding up so far. I tried to make it as strong as possible but it might break off in time, we'll see. The arm does retract into the door slightly when you remove the pin. I used a small pick to put into the hole and pulled it out to reattach the pin through the latch. It's nice that the door is working normally again and staying open when I want it too!
@jwaid941
7 жыл бұрын
HAHAHAHA, I hear ya! If I am parked on an sort of an incline I'm pretty much hating life. Good news for me is, I think my passenger-side door check is only missing the pin, so that should be an easy fix... it's the driver side that's going to be tricky. I'll give the weld a try and see how it goes *fingers crossed* p.s. Thanks for the reply!
@GarageBuiltHondas
7 жыл бұрын
Nice, anytime! I try to reply to all comments, may not be super quick if I'm working but usually try not to respond within a day or so!!
@timtheyao3382
6 жыл бұрын
WTF I FUCKING FINALLY THE VIDEO I NEED!! THANKS BRO!!!!
@GarageBuiltHondas
6 жыл бұрын
Anytime!
@timtheyao3382
6 жыл бұрын
i can now change my rubber weather strip.. lol i got stuck looking on the internet 7:33 help me a lot
@GarageBuiltHondas
6 жыл бұрын
Glad to hear!!
@ZenTech
5 жыл бұрын
Hey do you think you can make a video on how to replace the driver side window? Just got my car back after it was stolen and the window is just completely obliterated. Along with my cylinder lock lol. Thank you in advance.
@GarageBuiltHondas
5 жыл бұрын
Did you attempt to fix it? Just got remove the door panel and you'll have access to it.
@thestaats7273
3 жыл бұрын
Hey! LOVE your channel! I just bought an 88 crx that i’m going to start restoring. just curious if you have any recommendations for where to get door panel, trim and number clips. I’m also wondering where to get rubber trim and seals for the doors and windows and sun roof
@GarageBuiltHondas
3 жыл бұрын
I don't know if you can find those brand new anymore. I'd keep an eye out on eBay and try some of the OEM Honda parts websites.
@demetriusmcgee6365
5 жыл бұрын
Excellent video I have a question. How were you able to pull that metal tab that hooks up to the frame? I followed how you did on the video but after I installed the door that tab went in and I can't pull it out far enough to put the pin back in.
@GarageBuiltHondas
5 жыл бұрын
Use a needle nose pliers to pull it out. That's how I did it.
@demetriusmcgee6365
5 жыл бұрын
@@GarageBuiltHondas thank u so much for the help
@GarageBuiltHondas
5 жыл бұрын
You're welcome
@briancastleman5523
2 жыл бұрын
What rim and tire size are you running on there? I like that fittment !
@GarageBuiltHondas
2 жыл бұрын
15x7+35 205/50
@srarcade
7 жыл бұрын
That 90 door panel actually looks sturdier than the 96-00 panels. I was just changing mine with a set that were a bit better and its like dealing with brittle pasta. Its awful when you hear "CRACK" putting it back on.
@GarageBuiltHondas
7 жыл бұрын
srarcade I've never had bad luck with EF panels. They are pretty sturdy even after all these years.
@robsmack1374
6 жыл бұрын
Awsome thank you much.
@dreamer2355
7 жыл бұрын
Great video upload as usual!
@GarageBuiltHondas
7 жыл бұрын
AutoTechDale So are we going with HonDale after all? lol
@dreamer2355
7 жыл бұрын
Jon Widmer we will once I have a good Civic to work on
@mygaragehonda1652
4 жыл бұрын
I'm looking for a part number listing & description for a 1988 CRX. Your help would be appreciated.
@GarageBuiltHondas
4 жыл бұрын
Find parts here. Hondapartsunlimited.com
@MrGUSGUS2
7 жыл бұрын
thanks for the quick response!
@alexiscolon4300
7 жыл бұрын
the most scary thing changing moldings i have to change mines they are super faded and have few dings. but at least i found a full set on a mint condition.
@GarageBuiltHondas
7 жыл бұрын
Alexis Colon You gotta be careful! removing the old ones won't be bad because if you damage them you'll be ok. Installing the new ones will be easy.
@kevmtz1901
7 жыл бұрын
hey Jon got a question, to adjust the door, you have to tighten the 12 mm bolts that you did on the video? my door is too low, and is a pain to shut it, a friend told me to adjust it in other bolts but it's the same, so doing it like you did it, will fix my problem?
@GarageBuiltHondas
7 жыл бұрын
Kevin Martinez It probably will. more than likely your hinges are worn creating the saggy door. if you adjust them like I did, you can usually offset them being saggy and have the door close perfect.
@MuffinRacing
7 жыл бұрын
This video is really helpful! Do you have a link to the clips you bought off of Amazon?
@GarageBuiltHondas
7 жыл бұрын
Door panel clips?
@MuffinRacing
7 жыл бұрын
Yeah, the ones for putting the door panel onto the door
@MuffinRacing
7 жыл бұрын
Yeah, the clips that you install in the panel at the 15:00 minute mark
@carlosroamfreeposse
6 жыл бұрын
Quick question I’m trying to put my original door handle on my 91 si the one I have on rn is from a accord and doesn’t have a key hole so do I pop off the door handle and that’s it or do I need to go through the door panel to switch them out??
@GarageBuiltHondas
6 жыл бұрын
+carlosroamfreeposse You need to remove the door panel. The original bolts up to the inside of the door.
@garryoak
4 жыл бұрын
I have to do this tomorrow and I gota say those dam doors probably weigh more than me!!
@GarageBuiltHondas
4 жыл бұрын
Haha
@mochi12342
7 жыл бұрын
Hey jon I have a 91 Civic Si hatch. DO you have a fix for seat belt light and door light on all the time. I dont know what I fix first the seat belt door i have no idea I though maybe you would know.
@GarageBuiltHondas
7 жыл бұрын
mochi12342 Your door latch mechanism needs replacing. I've had the same problem before and a new latch fixed it. Try to lubricate it first, and reposition the door striker on the body. It has 2 large Phillips head screws. Once you loosen them a little you can move it around.
@MrGUSGUS2
7 жыл бұрын
Quick question, nothing to do with the door, what fender will fit a 91 Honda Crx HF, I was told the hatchback is also comparable. if so what model and year?
@GarageBuiltHondas
7 жыл бұрын
None fit perfect except for the 88-91 CRX. The hatch is the next alternative but you won't be able to use the bottom original fender molding that comes on the crx and the corner light shape is different so you will need a hatchback corner light also.
@robsmack1374
6 жыл бұрын
When I think it's tightened it just loosens up again... Are there supposed to be clips behind it?
@GarageBuiltHondas
6 жыл бұрын
+Robert Shawiak There is mounting hardware that might need replacing.
@josehilario6652
7 жыл бұрын
Can you do a video about the lighter port? Mine doesn't work
@josehilario6652
7 жыл бұрын
Done and fixed thank you
@GODSGUNSGLORY
7 жыл бұрын
quick question, is it possible to do the 88 seat belt conversion on 89-91 civic/crx?
@GarageBuiltHondas
7 жыл бұрын
GODSGUNSGLORY Yes, but you'll need to weld in some supports on the pillar where the 88-89 Civic or 88 CRX belt mounts. I've seen some write-ups online but seems like more trouble than it's worth.
@Wagon_Attack
7 жыл бұрын
nice
@16ValveVtec
7 жыл бұрын
hey jon is the doors for crx and civic the same?
@GarageBuiltHondas
7 жыл бұрын
Unfortunately no, the CRX has a smaller shape because of the slope/angle of the car.
@foil666
6 жыл бұрын
Oh man, that auto seatbelt on usdm cars looks like such a pain to deal with.
@GarageBuiltHondas
6 жыл бұрын
+André Rodrigues you get used to it. More of a pain when swapping doors but otherwise it's not a bother to use.
@SimornM
3 жыл бұрын
i just bought an 86 accord hatch with a different color driver door since it was in an accident. the rest of the car is actually grey, would this be similar? sorry, im new to diy on my own car lol
@GarageBuiltHondas
3 жыл бұрын
Yes. It's a close process completely. 👍
@SimornM
3 жыл бұрын
@@GarageBuiltHondas thank you! ill be sure to refer back to your video
@GarageBuiltHondas
3 жыл бұрын
You're welcome
@housealan334
7 жыл бұрын
Why is the seat belt in the door? Is this US thing?
@GarageBuiltHondas
7 жыл бұрын
House Alan yes, 90-91 civic and 89-91 Crx had door mounted seat belts.
@isaacjones3978
4 жыл бұрын
What was name of clips that went on inside door card been looking cant find
@GarageBuiltHondas
4 жыл бұрын
amzn.to/2zqK3Pc
@isaacjones3978
4 жыл бұрын
Sweet thanks for replying
@mamba2456
4 жыл бұрын
I have a 90crx si . But I do not have a passenger window . It's hard to find one. Does anyone know if a window from a civic hatch is interchangeable?u
@GarageBuiltHondas
4 жыл бұрын
It can be hard to find them. The hatchback window doesn't fit. Only 89-91 crx will fit your car, or any crx that has the door mounted seat belts.
@robsmack1374
6 жыл бұрын
I need a rear side window fix for my 89 ef. It's loose and falling out haha
@GarageBuiltHondas
6 жыл бұрын
+Robert Shawiak which side? You can probably go tighten all the mounting parts.
@douglasestrada3736
7 жыл бұрын
I like your car and videos ( said hi to me please ) #firstcomment
@GarageBuiltHondas
7 жыл бұрын
Douglas Estrada Hey Douglas!!
@douglasestrada3736
7 жыл бұрын
Jon Widmer hello my friend
@GarageBuiltHondas
7 жыл бұрын
Douglas Estrada how's it going buddy?
@douglasestrada3736
7 жыл бұрын
Jon Widmer good good I just finish installing a kill switch n a steering wheel to my 89 Honda Civic hatchback DX and you
@GarageBuiltHondas
7 жыл бұрын
Douglas Estrada it's never-ending for me. there is always something I want to work on!
@robsmack1374
6 жыл бұрын
Driver side.... The screws won't tighten down
@GarageBuiltHondas
6 жыл бұрын
+Robert Shawiak at the front of the window where the window is closest to the door?
@jdmgarage2191
7 жыл бұрын
Hey Jon on my 1991 Honda Civic one of the high beams doesn't work what could it be
@GarageBuiltHondas
7 жыл бұрын
Bernie Reyes check your fuses under the dash.
@jdmgarage2191
7 жыл бұрын
Jon Widmer ok I will thank you always a great helper man your awesome 👏
@GarageBuiltHondas
7 жыл бұрын
I try buddy, you're one of my favorite subscribers!! I wish I would've been into EF's when I was your age!
@jdmgarage2191
7 жыл бұрын
Jon Widmer lol ef's are awesome I wanted a 1995 Honda Civic like the one that came out in 2 fast to furious but my dad told I found a car for would you like this one and I am like sure better than nothing,but then I actually fell in love with it I love my car.how old where you when this things came out
@GarageBuiltHondas
7 жыл бұрын
Bernie Reyes I was your age when they came out, but it wasn't until I was 25 when I got my first EF. a 1988 4speed STD model which needed a new clutch. It was a fun learning car and it started it all for me.
@Dannyass1233
7 жыл бұрын
I'll take your door
@GarageBuiltHondas
7 жыл бұрын
danny ramirez Come pick it up, it's yours if you're in town.
@Dannyass1233
7 жыл бұрын
Jon Widmer damn I'm in Cali you should ship it lmao if down
@GarageBuiltHondas
7 жыл бұрын
danny ramirez man, it would probably be pretty expensive. it weight about 70lbs. you could probably have better luck looking for a part out or in a junkyard close to you.
@Dannyass1233
7 жыл бұрын
Jon Widmer forsho the thing thats wrong with it is the window it not aligned and it of track
@GarageBuiltHondas
7 жыл бұрын
danny ramirez I'm going to make a video of my passenger door window regulator replacement. I'll show how to remove and replace it.
Пікірлер: 140