DO NOT try this method if your Fusion is a 2013 model. The two mounting clips toward the rear of the car are different than what's shown in this video. They are thin plastic and molded with the whole unit. They first have to be disengaged from the black plastic mounting shell that's part of the headliner before pulling down. Otherwise, you WILL break either the clips, or worse, the headliner mounting shell. It would've been nice if Nick had told us WHAT YEAR his Fusion is. Also, it's called an Overhead Console.
@HallStevenson
5 жыл бұрын
We've got a '14 with the sunglass pocket broken so I'll be looking into 'fixing' this pretty soon. Do you know if this design with the '13 models was definitely changed before '14 ? I do see that Ford superseded the original p/n with an updated p/n.
@cs51762
5 жыл бұрын
@@HallStevenson I got the part from Grainger that's described in this link: www.fordfusionforum.com/topic/17610-sunglasses-holder-latch-broken/
@robertkritzer8154
4 жыл бұрын
You are 100% correct! Wish I saw you comment before I broke the clips on my 2013 fusion. I realize now that they can be disengaged by reaching a finger through the sunglass holder when it is folded down. The part seems to be holding fine even though these 2 clips are now broken.
@calebbrush4320
3 жыл бұрын
@@robertkritzer8154 but once you pull them back ones just pull from the front as nick shows? For a 2013
@matoramic4441
2 жыл бұрын
@@robertkritzer8154 how did you put it back in and secure having hard time doing so doesn’t line up
@Lady_Tism
2 жыл бұрын
I appreciate your videos more than you'll ever know.
@stoneslate6401
3 жыл бұрын
Note. When you open the headless case. On the inside are two tabs. One in each side. You pull them in towards the center. Be careful they may break.
@notsolegitgarage2967
2 жыл бұрын
If anyone else here is trying to get rid of a rattling coming from the overhead console I removed the black plastic piece with the metal clips attached to the microphone wire and reinstalled with the remaining 4 clips, still solid mounting
@yup-2067
3 жыл бұрын
Great vid took it out but the back of 2017 has lights that are in a circut boared so there impossiable to change with out seriouse work
@portdawg1595
4 жыл бұрын
Great video I tried this to the T and mine doesn’t seem to move except the roof lining itself mine is a 2014
@nickolaslayne1759
3 жыл бұрын
i dont mean to be so offtopic but does any of you know a way to get back into an instagram account? I stupidly lost my login password. I would appreciate any assistance you can offer me!
@terryesteban8954
3 жыл бұрын
@Nickolas Layne instablaster ;)
@nickolaslayne1759
3 жыл бұрын
@Terry Esteban I really appreciate your reply. I got to the site on google and I'm waiting for the hacking stuff atm. I see it takes quite some time so I will get back to you later with my results.
@nickolaslayne1759
3 жыл бұрын
@Terry Esteban it did the trick and I actually got access to my account again. I'm so happy! Thank you so much, you saved my account :D
@terryesteban8954
3 жыл бұрын
@Nickolas Layne No problem :)
@GamingLogistics
5 жыл бұрын
Could I wire interior footwell LEDs to this? I also wanted to install those illuminated plates.
@joeg.1119
7 жыл бұрын
hey nick i have a problem my dome lights aren't working they dont turn on when i open the doors neither when i close them
@Nickthecarguy
7 жыл бұрын
Joe Gotti does it do with all the doors or one of the door I'm having that problem with my driver side when I open my driver side it don't respond
@yup-2067
3 жыл бұрын
Check vehical settings on your dash
@TheCarCrazyGuy
6 жыл бұрын
Are there any live wires up there to use as a source of power for a dash cam?
@Nickthecarguy
6 жыл бұрын
The Car Crazy Guy are you wanting a constant power even if the car is off?
@TheCarCrazyGuy
6 жыл бұрын
Nick the car guy Yes.
@Arduex2020
6 жыл бұрын
Wonder if it's the same on a 15 MkZ... dome assembly looks the same...
@Nickthecarguy
6 жыл бұрын
Arduex2020 yes it should be the same procedure to remove the dome light
@khloereagan5831
6 жыл бұрын
Which wires did you connect to?
@Nickthecarguy
6 жыл бұрын
Khloe Reagan what do you mean connect to what?
@khloereagan5831
6 жыл бұрын
I’m trying to instal lights that turn on when the door opens and turns off when the doors close. but which wires do i connect them to? and which ones the negative?
@ecoboostedfuze
3 жыл бұрын
@@khloereagan5831 I'm looking for this as well. have you found the solution?
@ecoboostedfuze
3 жыл бұрын
I guess I will just use a test light on the 3 wires to see which one gets power when the door opens and turns off when it shuts.
Пікірлер: 31