literally the only person that cared to explain it thoroughly, thanks buddy
@pauloliveri9621
3 ай бұрын
Thank you. With a bunch of these rear wheel videos, at least someone knows how to teach. The best part was how you spoke clearly. There are foreigners (primarily British) who are barely intelligible. And you were able to keep it short. 👍
@TonyTsai
10 ай бұрын
thank you, I was removing the wheel off and on for my trainer, and I now feel much at easy with these simple gestures can help me! great vid!
@seanoshea3052
Жыл бұрын
This is without a doubt the simplest and, after seeing 6 other videos on this subject, the very best video. The most important reason is that you can see everything he does with his hands and how he uses them to make sure the chain is positioned correctly especially on the reinstall. So many other videos block your view of this process. This guy has given me the confidence that I needed to be able to reset my bikes rear wheel. The Pro's Closet is very lucky to have this guy in their crew!
@theproscloset
Жыл бұрын
Glad it helped, thank you!
@jx14aby
Жыл бұрын
Yeah, but he cheated by using a bike stand. I've never gotten a flat in my garage. 100% of the time it was while I was on the road.
@dperreno
Жыл бұрын
If you are using quick release skewers (or a bolt in, not a thru-axle), then I recommend placing the bike with both wheels on the ground and then releasing and tightening the quick release (or bolt) so that the wheel is securely bottomed out in the dropout. Thru-axles always align the wheel perfectly, so there is no need to do this.
@bweise3
Жыл бұрын
Thanks! It took me an hour but I did it lol. It's very clear to see everything, appreciate you!
@theproscloset
Жыл бұрын
Glad it helped!
@BeatleTom71
Жыл бұрын
I echo @sean o'shea - the very best video you'll find on this. Brilliant instruction. Clear, concise words. Great presentation. Big cheers 🙂
@whatelsewouldyoudo
10 ай бұрын
THANK YOU THANK YOU! Was stuck with the rear wheel for close to an hour! Thank you!!!
@twinphill900
7 ай бұрын
Hi mate, I just changed the rear tube on my 7 speed cruise after watching your video. Thank you for excellent informative instructions. I did get grease on my hands😅😅😅
@COB506
2 жыл бұрын
So funny this came out. I just got a new bike with thru axles and needed to take the wheels off this morning. It's all in the little details 👍
@theproscloset
2 жыл бұрын
Right on!
@injuredtabletennisplayer1474
2 жыл бұрын
You are the man. My biking gloves and hand grips thank you.
@theproscloset
2 жыл бұрын
Glad to help!
@phoenixinthetrees1446
10 ай бұрын
I've been riding bikes for years and always screw this up. You make it look so easy - thanks!
@cameosisj6007
Жыл бұрын
Great explainer video. Gonna skip the GCN one completely because this was so comprehensive.
@theproscloset
Жыл бұрын
Glad it was helpful!
@HKRoad
Жыл бұрын
THANK GOODNESS! Been driven mad by my AXS derailleur
@CAR.GUY.HP.
6 ай бұрын
Thanks, my disk brakes do a clapping sound when I ride it and go full on on the brakes, the disc brakes smash onto the plate. Could you please make a video on how to fix that?
@DaveCM
2 жыл бұрын
Removing is the easy part. Putting back in the rear wheel on my road bike is the hard part. I wish my road bike had a lock on the rear derailleur like my gravel bike does. Getting everything lined up while dealing with the rear derailleur at the same time is a pain. Once. I managed to catch a sping on the disc pad with the rotor and bent it while putting the rear wheel back in.
@theproscloset
2 жыл бұрын
💯💯💯
@tomhammer1784
16 күн бұрын
If I am on the road, how do I get the bike home to put it in my bike stand? Most tire repairs I have experienced are on the road. Chain lube is hard to clean off the hands and can dirty a jersey. I was always told the reason most bike shorts are black is in bike road racing prior to support vehicles with spare wheels or even spare bikes riders fixed their own flats. And oily hands on light colored shorts would not be stylish. One thing I carry with me is one or two latex surgical gloves. They are cheap and weigh nothing. Then after changing the rear wheel the dirt/lube is on them. After which I pull them off turning them inside out and stuff them in a jersey pocket or in a leg of my bib shorts with little or no contamination. And no littering.
@Eiko2.0
8 ай бұрын
I have disc breaks how do I remove it? is it the same thing or no? I haven't touched the rear wheel at all because I'm afraid of removing and damaging it
@michaelfallon3647
11 ай бұрын
how do you take out the rear wheel of a bike with an internal gear hub.
@tomkenny5864
2 жыл бұрын
Thanks for the help
@theproscloset
2 жыл бұрын
You're welcome!
@johnoliveira1028
2 жыл бұрын
I have a through axle with an Allen but but for the life of me can’t find an Allen key that fits. What’s the size ????
Ай бұрын
6mm
@thefilmandmusic
Жыл бұрын
How do you get in straight so no snagging on brake blocks
@armandojuan64
2 жыл бұрын
Thank you , brother .
@theproscloset
2 жыл бұрын
You're welcome!
@uptownphotography
4 ай бұрын
Well explained...
@sv6k0a39
Жыл бұрын
Thanks bro!
@denvermatt
Жыл бұрын
thank you !
@ghostkush2778
2 жыл бұрын
Thank you now I can change my tires
@theproscloset
2 жыл бұрын
Glad we could help!
@mattdistad1338
Ай бұрын
My wheel still won't come off and I have grease all over my hands
@peterkossits4794
Жыл бұрын
Needed a little more detail here. Just saying "it's pretty easy" and doing it quickly doesn't cut it for a beginner. i watched this, struggled for half an hour and then found another one where the guy showed me how to hold the bike, how to hold the wheel, where to lay the bike down on the chain, when to pull the derailleur. Got it in a couple of minutes although I still haven't internalized it and it's not automatic. Might also want to cover how to do it with disk brakes. That adds another level to the process where you have to be extra careful.
@bigbeat11
Жыл бұрын
I upgraded this bike to105 but now I can't get tire off without detaching the rear derailleur what am I going wrong?
@theproscloset
Жыл бұрын
Tough to say without seeing it. Your best bet is taking it into your local bike shop and having a mechanic take a look.
@user-nu5fx6en9h
2 жыл бұрын
i am using a sram etap, may i know if is ok just to push the derailleur like that on the videos?
@theproscloset
2 жыл бұрын
The instructions in this video will work for etap as well.
@kstonurai9350
Жыл бұрын
im crap i still cant do it idk how you are holding it in place lol i have a bike stand and i still cant do it, the wheel drops back out before i can screw in the bolts
@manonthebike2205
6 ай бұрын
The advantage of a bike stand, for those that have one, is gravity helps you get the wheel out - but can be a massive pain when it's time to put the wheel back in. In my experience as a volunteer at a local bike repair co-op where helping people learn this is our most common activity, doing this with the bike upside down (respect your saddle and handlebars) is far easier. Getting the wheel out - simply lift it, once you've done the leadup steps shown in this video. Reinsertion is easier and the step where gravity is most helpful and sounds like it would help you the most. Find your equivalent of a bike repair co-op where you can learn this in person where someone will be able to help you learn how to do it. Cheers from NZ.
@samuelpalmer449
2 жыл бұрын
Oooc
@groovizintheheart
11 ай бұрын
all these youtube videos showing how to remove a quick release lol try the old school bolts and maybe i’ll watch your videos
@manonthebike2205
6 ай бұрын
Old school bolts - almost guaranteed to be 15mm (or Imperial equivalent) and of course you'll need two spanners. One to hold bolt on one side while you undo the other. Take turns on each side until nuts undone enough to allow removal from the dropouts. These are slots on either side of the frame tubes that the axle slots into. After that it's the same. Of course most people don't ride with any form of toolkit, and those that do would be unlikely to carry one, let alone two, spanners with them. If you're lucky, you can fix a puncture without taking the wheel off, but that would be easier to demo with a video. Once you try and "get it", immediately(!) do it again, then you'll never forget. Bit longer response than I'd intended, nevermind. Cheers from NZ.
@blurayauthority
Жыл бұрын
I just kick it. Usually (eventually) comes out. Kidding, of course. I have (and still don't) no idea how to do this. I'll just throw the entire thing in my car and let my LBS deal with it.
@manonthebike2205
6 ай бұрын
I suggest you find a local bike repair co-op (naming may differ where you are) and go along to learn in person. Someone will be able to guide you, correcting if needed, and you'll have learnt how to do it yourself. Want to really make sure you've learnt it? Teach someone else - it'll force(!) you to make sure you really know it yourself, and of course this will give you more practice. Give this a go, and good luck. Cheers from NZ.
@nickstabz8755
2 жыл бұрын
Um who else scratched their frame cuz the rotors rubbed itself, only me? Huhu
@theproscloset
2 жыл бұрын
You’re not the first and you won’t be the last 😂
@ewgreason
2 ай бұрын
Professor! I just heard you say you cannot vote for anyone who boycotted the Prime Minister's speech. SO, you can't vote for VP Harris because she, apparently, boycotted the speech. Thank you for expressing your integrity for us.
@nolly485
8 ай бұрын
This wont work out on the road due to no bike stand you would have to flip the bike upside down.
@manonthebike2205
6 ай бұрын
Good point. I help at a local bike co-op(?) where half our existence is helping people learn how to maintain and repair their bikes. There's nothing like doing this in person where you watch someone do it, then have a go yourself - with guidance and feedback as needed. While we have stands, I always show people how to do it with the bike upside down. No-one who's ever come in has their own stand. As long as you do something to respect the saddle and handlebars, this is what most people will be doing at home, or when they get a flat out riding. Extra steps and precautions required if you're dealing with an e-bike. Still a good video for reasons that have been covered by other comments. Cheers from NZ.
@Pshpshpshpshpshpshpsh
2 жыл бұрын
This is the exact tutorial I needed. But you said the front is easy, can we get a tutorial on that next?
@theproscloset
2 жыл бұрын
Removing the front wheel is the exact same process only without the chain getting in your way. Once you remove your thru-axle or loosen your QR skewer, the wheel should just drop out of the fork.
@Pshpshpshpshpshpshpsh
2 жыл бұрын
@@theproscloset I’m a visual learner though… 😂
@NM-Collection
2 жыл бұрын
@@Pshpshpshpshpshpshpsh exactly as 1:21 but no chains. Can't even imagine getting that wrong 😂
@scottamy404
4 ай бұрын
I'm 53 and have been riding road and gravel since I was 40 and still struggle with the rear wheel!
@longebane
13 күн бұрын
Yeah even after this video it’s still a pain
@Thiagarajah1
2 ай бұрын
The part I hate most.... is installing it back. With disc brake don't do it upside down unless you want to mess up the brake field system.
@user-dl2ii5ps1n
Жыл бұрын
Excellent tutorial that covers all situations you might encounter: disc/caliper brakes, quick release/through hub axles, removal and re-installation. ANd how to keep your hands clean as well. THANK YOU.
@theproscloset
Жыл бұрын
Hope it went smoothly Scott!
@johnojohno4194
10 ай бұрын
Why do I never get punctures in the front wheel !!!! it is always the rear 😂
@lunchplus
Ай бұрын
Because most of the weight/force is there so it gets pressed more than the front
@gregquinn642
5 ай бұрын
First time changing my own inner tubes and I used this video as a reference for removing the back wheel. Appreciate the demo!
@heilong79
2 жыл бұрын
Lol at all these videos using quick release this and that. I guess all new bikes are very conveinient these days.
@TC55555
Ай бұрын
How do you get the back wheel off when Dicks Sporting Goods in Green Bay has the bolt so damn fckn tight!!!?
@barryberland981
3 ай бұрын
This is the smoothest best video of rear wheel installation. Thank you sir. 👍
@peterneumann7145
6 күн бұрын
It’s called a quick release because you do not need to unscrew it on the rear. Watch a bike race.
@djjoeykmusic
4 ай бұрын
Thank you So much Blessings
@leftyseel8658
Ай бұрын
How about on a triple chainring, do you need to shift to the smallest, or is it ok to just shift to the middle?
@ryanpatton1795
4 ай бұрын
When reassembling it the wheel is now catching on the brakes. Is there an easy way to realign when reinstalling? Putting the bike on the ground with loose nuts is a no go, otherwise i guess its just guess and check?
@adios239
3 сағат бұрын
thanks man..
@jeffreydavid6794
Ай бұрын
How do I make it so the wheel spins when I put it back on the bike? It wont spin. Are the brakes on?
@rh4402
Жыл бұрын
Got my sub! Easy complete concise
@jddeefo1022
Ай бұрын
Thanks for the help, great video!
@bobsy852
3 ай бұрын
How do you release the disc brakes?
@GNH-1812
2 ай бұрын
Awesome. Thank you😊
@hrmd3031
Жыл бұрын
Thank you 🙏🏾
@irmasanchez5274
Жыл бұрын
Hello, Thank you for the video. #1 what does hardest gear mean? I have a seven speed bike. Does that mean put it in seventh gear? Thanks.
@theproscloset
Жыл бұрын
Just shift until the chain is settled on the smallest cog on your cassette.
@irmasanchez5274
Жыл бұрын
@@theproscloset Thank you! I'm not familiar with the terminology. I've decided to take a free local class on how to do this.
@AOL0321
2 жыл бұрын
What about the SRAM AXS road rear derailleurs, which unlike my SRAM XO1 mtn. bike derailleur, do not have a cage lock button? Do you just use regular pulling force against the derailleur body as with a traditional mechanical derailleur? Just want to make sure I'm not damaging that Orbit fluid clutch system. Thx.
@hanstdi
6 ай бұрын
Excellent video. Thanks for the clear explanation. 👍
@DearNetizens
Ай бұрын
It took me four hours to figure out how to remove my back wheel. 2:00 minutes into the video I had my back wheel off. 😂😂😂 thank youuuu.
@JamesIsom-u9r
9 ай бұрын
Really appreciate this video first time changing rear tire on my Jamis Axis ten speed and I have had the bike since 1993 lol.
@joezazasin7
2 жыл бұрын
omg it's rocket science
@theproscloset
2 жыл бұрын
🚀
@joezazasin7
2 жыл бұрын
@@theproscloset Can you make a video how to replace the entire back wheel for a new one. How put the break's and everything from the old wheel to the new one, a full guide installation. Sorry for the sarcasm, but everyone is making the same video and it's very useless
@glennrothwell6311
Жыл бұрын
Super useful video, I'm new to doing my own repairs and 1:50 was just what I needed to know!
@ryanprasad2090
9 ай бұрын
Doing this look terrifying! 😱
@assassinblackop
7 ай бұрын
Bro I have been fighting this wheel for an hour. Thank you so much!
@NM-Collection
2 жыл бұрын
Perfect!
@theproscloset
2 жыл бұрын
Thanks!
@ej9197
2 жыл бұрын
Good and huge bicicle but i dont have the money for buy one of this beutyfull 😭😭
@mattsmith1440
7 ай бұрын
Best tutorial ever.
@robdrury3359
6 ай бұрын
Great tutorial, you made it look easy it did work thank you,
@frankortolano5886
Жыл бұрын
Wow that was the best bike video so far
@danielberry1635
4 ай бұрын
Thanks for the video - keep posting
@andrewduggan1961
Жыл бұрын
What are the groves for in the frame on rear thru axle?
@tr1co0
Жыл бұрын
Super helpful. Thank you!
@littlehawk299
Жыл бұрын
If I get a puncture in the city , can I just walk the bike home ?
@theproscloset
Жыл бұрын
Sure! But if you happen to get a flat far from home, you'll want to know how to remove the rear wheel to fix it.
@dieboy3580
Жыл бұрын
Thanks!
@robertbotta6536
2 жыл бұрын
Best I have seen. Thanks.
@theproscloset
2 жыл бұрын
Glad you liked it!
@BrianDime1
Жыл бұрын
Thank you!
@theproscloset
Жыл бұрын
You bet!
@yevanmallawa
Жыл бұрын
Thank you so much! This video was super clear and helpful and it made the job so much easier. Thanks guys!
Пікірлер: 113