Thank you for sharing. I e joy watching you perform your magic. How great is it that Braden wants to come and work with you when he gets back. I am in for watch you do anything, I am finding it all interesting to learn about. I never want to stop learning. I am going to be looking forward to your next video until then I am keeping you and your's in my thoughts and prayers please stay safe, take care and God bless.
@charles4200827
4 жыл бұрын
One of Your many Favorite Fambammer's are here
@DPTubs
4 жыл бұрын
You’re awesome Charles!
@carmencruz7227
3 жыл бұрын
Awsome!!!!! now im going to try, wish me luck
@nophonevalet
3 жыл бұрын
So cool. Got me all pumped up I think I can do it!
@DPTubs
3 жыл бұрын
Doooooo iiiittttt! Good luck
@charles4200827
4 жыл бұрын
Yes repairs on everything
@rebeccadunbar761
4 жыл бұрын
Yes definitly more videos please!
@DPTubs
4 жыл бұрын
Thanks Rebecca!
@jbloomjr
4 жыл бұрын
Great stuff!! Many thanks!!!
@DPTubs
4 жыл бұрын
I appreciate you watching!
@Jen4evr
4 жыл бұрын
Nice video Danny! Looks great
@DPTubs
4 жыл бұрын
I appreciate that Jen!
@dustinbutler3626
4 жыл бұрын
I like to do more repairs I appreciate all your things to do near me
@DPTubs
4 жыл бұрын
Thanks Dustin...we will try and show more repairs as I get them.
@frenchgameuse3587
4 жыл бұрын
Love from a FamBammer! 😘
@vikto07081980
Жыл бұрын
This little kzitem.infoUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif tub works perfect in our 6 x 6 shower and is easy to get in and out. Also easy to drain.
@stephaniemckee-akafarmgirl
4 жыл бұрын
Thank you so much for this info...the tub in my small bathroom has cracks in it and I thought I would just have to replace the whole tub 😳 I’m gonna try this and see how it turns out! And yes I want to see more tub repairs! #fambammersunite
@DPTubs
4 жыл бұрын
That’s awesome! All of the material is at Home Depot. Just make sure to check if your tub is Bisquit color or White..usually will Not match 100% but very close.
@stephaniemckee-akafarmgirl
4 жыл бұрын
DP Tubs it’s white...I put it in about 15 yrs ago and really didn’t want to have to replace it yet! Thank you sooo much!
@bobdelmar9569
4 жыл бұрын
@@DPTubs My wife is concerned abou tthe "Not match 100% but very close". I am concerned about the surface not being the same height as the original. Ideas? Thanks for the detailed info.
@yesiamsharon
4 жыл бұрын
Cannot thank you enough for this. I just can't.
@DPTubs
4 жыл бұрын
No problem glad I could help
@haleyjones1125
2 жыл бұрын
I appreciate this video greatly as I’m going to attempt to fix a crack in my tub tomorrow. I watched other videos why did you not use the fiberglass sheet for this one? I cannot tell if I will need a fiberglass sheet for mine.
@DPTubs
2 жыл бұрын
If the crack is hairline and the surface is sturdy without much fluctuation
@haleyjones1125
2 жыл бұрын
@@DPTubs Thank you I was nervous 😂
@windycitytwins4487
4 жыл бұрын
Welcome to the Fambammmmmm
@billawiszus4315
2 жыл бұрын
Is it recommended to add additional coats of the resin?
@tonyburry9036
4 жыл бұрын
You should make a video on how do you clean your spray guns!! 😊
@DPTubs
4 жыл бұрын
Yes definitely coming up because mine is a mess right now lol
@tonyburry9036
4 жыл бұрын
Thank show us the best option and how to keep it clean, hard to clean then guns!! Thank you!
@splashpandaentspe294
Жыл бұрын
What do i need to do if the support underneath tub is soft in middle? Please help and answer! 🙏
@splashpandaentspe294
Жыл бұрын
Dang... No reply? I really need an answer. Anybody? 🤷😐
@debross9
4 жыл бұрын
Love in this
@yolondiacullum7236
4 жыл бұрын
Just found your channel...more repairs please!!!! Thank you.
@DPTubs
4 жыл бұрын
Ok I will do once this week.
@dougfreshking1977
2 жыл бұрын
Does this work for acrylic tubs too? I'm having trouble figuring out if my tub is acrylic or fiberglass.
@tankty6977
4 жыл бұрын
I have a small crack in the middle of the floor of a fiberglass tub. Would you recommend same or one of the putty type repair products. Thank you and this was a great video.
@DPTubs
4 жыл бұрын
I would not use a rubber putty. How big is your crack?
@yesiamsharon
4 жыл бұрын
I have the same issue.
@funkateeer9
3 жыл бұрын
Which one did you go with? Did it work?
@thomasinzero6705
3 жыл бұрын
Thanks for the video, I wish I saw this before attempting to repair the crack on my fiber glass tub. I used Keeney Bathtub Inlay Kit for Bone Colored Tubs to try and fix it. I realized after it was the completely wrong color and it did not seal the crack. What is the best way to remove the putty and start fresh?
@DPTubs
3 жыл бұрын
Use a single edge blade or a plastic scraper to remove. You can sand with 80-100 grit sandpaper to thin out the previous coating. Just remember to primer coat the area before spraying the new coating
@thomasinzero6705
3 жыл бұрын
Thanks, I put the bondo fiberglass resin and am waiting for it to cure. What texture should the resin be when fully cured?
@andyk.5718
3 жыл бұрын
Thank you Danny for great step by step instruction. Currently following your steps to fix a crack in a tub and i have question for you. The Bondo general purpose putty you are using is not available in Canada, can i use the Bondo body filler instead?. Thanks in advance
@DPTubs
3 жыл бұрын
Yes you can!
@andyk.5718
3 жыл бұрын
@@DPTubs Thank you
@andyk.5718
3 жыл бұрын
@@DPTubs Is the reason of using Body filler/All purpose putty is to smooth the surface of the resin ? or there is any other function it does?. The tub crack i am repairing is not big and i did not use Bondo Hair, just used resin and mat. After sanding the resin it came out smooth and nice so i am wondering if i can prime it and paint it without using Body filler if it is not necessary. Thanks for your help
@Jlgarner1971
3 жыл бұрын
in other videos you used Krylon spray for small jobs. What is the reason to switch up to Homax?
@DPTubs
3 жыл бұрын
Color....sometimes I have to swap up to match the color of an existing tub. Trying to match as close as possible
@madkilla9
4 жыл бұрын
What caused the crack? Is it a bad base? I don't think I have a solid base below my tub and that's what's causing the crack. I'm wondering if I should get a new tub or can possibly repair the existing tub.
@DPTubs
4 жыл бұрын
Where are you located! Most bases have a gap between the sub floor and the base of the tub, or may even have particle board substrate that eventually breaks or cracks. If there is a sub floor then injectable foam can be sprayed under the base for support then fiberglass patched.
@kimhart9803
3 жыл бұрын
Do you have to prime it before you spray paint the color on?
@DPTubs
3 жыл бұрын
Recommended yes but not always necessary. I like primer as it helps me see any imperfections before final coat
@vickiewinkfield3080
3 жыл бұрын
Where can I buy this at
@Crispyyy7
4 жыл бұрын
Just curious why you didn't drill holes at the ends of the crack to stop it from spreading like in your other videos?
@DPTubs
4 жыл бұрын
This was a very small thin Surface crack that hadn’t penetrated all the way through yet. The reason for the use of resin was due to the area the crack was in.
@Crispyyy7
4 жыл бұрын
@@DPTubs Ah got it thanks for that. I'm going through this now and have a 2" crack but it has gone all the way through so will drill holes on either side. Thanks!
@DPTubs
4 жыл бұрын
Kevin Ng yes I would recommend that and use the cloth / mat and resin.
@kendraclark4404
4 жыл бұрын
Great job....if possible can we see repairs on a stand alone shower? Tfs #fambammersunite🙂
@DPTubs
4 жыл бұрын
Yes...what kind of repairs?
@kendraclark4404
4 жыл бұрын
@@DPTubs a huge section of the tiles has fell out. The borders are always blacken it's hard to be cleaned
@DPTubs
3 жыл бұрын
Kendra Clark I have a video on how to remove tub caulking. That will help you know how to remove caulking around the base of the shower to remove the black molded caulking
@herbmoring2147
3 жыл бұрын
Will this work if the crack is in the middle of the tub...where you stand while showering?
@DPTubs
3 жыл бұрын
Yes! However I have other videos that will show you in more detail what you should do depending on the crack size and location
@ryanfearnow3627
3 жыл бұрын
How do you apply the puddy? Brush?
@DPTubs
3 жыл бұрын
Check out my other fiberglass repair videos and I show more detail. I am shaking more and more as I do more videos
@ChrisYvonne05
4 жыл бұрын
✌
@rogerm3854
3 жыл бұрын
No Zinser 123 primer this time?
@DPTubs
3 жыл бұрын
No..I was pretty confident there would not be a reaction between putty and the finish coat was a bit darker than bright white so didn’t really need a neutralizing color
@locosporthd2521
3 жыл бұрын
Do you recommend drilling holes n a 4 inch crack?
@DPTubs
3 жыл бұрын
I recommend drilling a hole at each end when each side of the crack is not level with each other. Meaning the crack has caused one side to be slightly lower. If it’s just a slight hairline stress crack then I would say no to the holes
@bjscharf
3 жыл бұрын
@@DPTubs What if this is on the side of the tub and underneath is a semi-open basement ceiling? I can't get my hand up there, but if I spray foam, I think i twill get everywhere.I patched it with a kit from lowes and a day later it cracked again. So I think it needs support, but don't want to ruin my basement.:-( Thanks so much!
@DPTubs
3 жыл бұрын
bjscharf all fiberglass units have a void space on the sides. If there is lack of support and the void space you would have to put so much foam to fill the area it’s not worth it. Patch the area with fiberglass mat, resin, bondo glass, sand smooth and spray Another option if you do not care so much about having a slight hump over the hole is to use Fiber Fix Patch. It’s great for DIY use. The patch is already set for you. You just need a UV light to dry it within 5 minutes and then skim it with putty.
@lindam653
4 жыл бұрын
You do such great work! Where is your company located at?
@DPTubs
4 жыл бұрын
Las Vegas!
@kathleeng6753
4 жыл бұрын
How do you repair a hole in a fiberglass garden tub? Hole is on the 'curve' of tub. Thank you!
@DPTubs
4 жыл бұрын
In my other fiberglass crack repair video I show how to fix a crack on the curve with resin and cloth
@kathleeng6753
4 жыл бұрын
@@DPTubs Thank you for a speedy response. I will watch it entirely.
@DPTubs
4 жыл бұрын
Kathleen Golden i also have a small hole repair in fiberglass coming up this week I will show
@locosporthd2521
3 жыл бұрын
DP Tubs do you recommend using resin on any area of the tub ? Or works only on curving area?
@DPTubs
3 жыл бұрын
LocoSport HD any area that has cracks or even small chips
@slavestoourfate
3 жыл бұрын
Would this work on cracks that are all the way through?
@trudeburch8914
3 жыл бұрын
💜💜
@alyssawssinging4039
4 жыл бұрын
Hey
@Michelle-ig2hu
4 жыл бұрын
Hi are you in southern California or can you recommend someone?
@DPTubs
4 жыл бұрын
I am in Las Vegas!
@Spencerwalker21
4 жыл бұрын
@@DPTubs cool I'm in Vegas as well. Me and my dad are going to try to diy it with your video. Just out of curiosity how much would charge someone for a fix like this.
@DPTubs
4 жыл бұрын
Spencerwalker21 Anywhere between $125-$175 for repair only!
@Spencerwalker21
4 жыл бұрын
@@DPTubs thanks for the info me and my dad can probably do it ourselves. KZitem is the best we called some guy my dad knows he thought over the phone it was gonna cost about a grand to fix and 3-4k for a new tub.
@DPTubs
4 жыл бұрын
Spencerwalker21 crazy pricing.. it’s definitely worth trying on your own first!. Let me know if you guys have any questions along the way. I also have some more in depth repair videos depending on the extent of damage.
@virginiakidd3709
4 жыл бұрын
Fambam
@DPTubs
4 жыл бұрын
#FamBammersUnite
@skythomas7008
4 жыл бұрын
#Fambammersunite
@michelleburgess2968
4 жыл бұрын
Rubbadubdub🛁🛁🛁🛁
@DPTubs
4 жыл бұрын
Thanks for the grub!
@FishOnIsMyHandle
3 жыл бұрын
👍422 👎 0
@user-xk3ti2iv9w
2 жыл бұрын
It will crack doing it this way will not last long.
@DPTubs
2 жыл бұрын
Not true! Thanks for sharing your opinion though!
@user-xk3ti2iv9w
2 жыл бұрын
@@DPTubs well that is your opinion.
@user-xk3ti2iv9w
2 жыл бұрын
@@DPTubs I've done it that way and it did not hold up at all
Пікірлер: 103