The trick to check the thermostat just saved my entire weekend. Now I get to go to the beach instead. Bless you.
@eSpares
3 ай бұрын
Hi Chris, It's great to hear that our video has helped you to keep your beach day! Hopefully your tumble dryer is back up and running great again.
@7ens3nButt0n
10 ай бұрын
i just found this video and could fix my 7 year old machine. super easy and neatly explained. this is why i love youtube!
@eSpares
10 ай бұрын
Hi, thanks for your comment here. It's great to know that our video has helped you fix your tumble dryer!
@kitchit123
6 жыл бұрын
GREAT TUTORIAL! For the past half a year I thought that my dryer was dead. However, I watch your tutorial, reset the button and it's good to go! Thanks
@eSpares
6 жыл бұрын
Great to hear it Denis, remember us next time you have a problem. 😊
@emilyclark5232
9 ай бұрын
Thank you for this video! I've just been able to repair my dryer as a complete novice with your help.
@eSpares
9 ай бұрын
Hi Emily, thanks so much for your comment here. It's great to hear that you have fixed your tumble dryer yourself, and nice to know that our video helped you on your repair journey!
@tywyn
5 жыл бұрын
Thanks Guvnor. All fitted and working. The repair guy I phoned said, oh the sensors gone. New sensor, board etc will be £150 plus labour, so not worth repairting. What a plonker he is. Fitted it myself thanks to this video.
@eSpares
5 жыл бұрын
Hi Simon, thanks for letting us know it's made our day you have fixed it yourself and saved money well done.
@cluelessnicluelessni6892
5 жыл бұрын
Just fixed my Beko DCU8230 based solely on this video. Very clear and simple. Thanks very much.
@eSpares
5 жыл бұрын
Hi CluelessNI, thank you for your post and glad our video helped.
@248ylloh
4 жыл бұрын
Amazing guide. Fixed by clicking and resetting the the thermostat. Thanks. Saved me a load of time,money and stress !
@eSpares
4 жыл бұрын
Hi 248ylloh , thank you for your post and glad we could help.
@sinnottliam4124
5 жыл бұрын
Thanks Matt. Successfully took the back off my Beko tumble dryer. Pressed the red switch as instructed, clicked reset and it all works fine now.
@eSpares
5 жыл бұрын
Hi Sinnott, thanks for your post and tuning in. We are glad you found this video helpful and fixed your appliance :)
@philmorris9187
5 жыл бұрын
Fantastic! Pressed my thermostat reset button and now have heat again!! If I hadn't found your video I would have forked out £250 for a new dryer 👍
@michaelmikaerahiggins3138
4 жыл бұрын
Thank you for the posting . I did have to change the heater but your clear instructions made the job go smoothly.
@eSpares
4 жыл бұрын
Hi Mikaera, thank you for letting us know and glad the video helped.
@wendyharrison8578
7 ай бұрын
Thank you so much!! Just amazing! Fixed with literally a click!
@eSpares
7 ай бұрын
Hi Wendy, it's great to hear that you have been able to fix your tumble dryer with help from our video! Thanks for your comment.
@legsy83
5 жыл бұрын
Great simple and clear video, parts ordered yesterday and fitted by a novice like myself today! Thanks!
@eSpares
5 жыл бұрын
Hi David, well done for fixing it and glad our video helped you.
@timl7217
6 жыл бұрын
Thank you for posting this video, saved me a nice few quid. Turned out that the trip switch needed resetting on mine. So a double bonus for me as I didn’t need a new heater.
@eSpares
6 жыл бұрын
Hi TL, well done for sorting and saving you money is what we try to do ☺
@garethclarke2047
5 жыл бұрын
Super video, eSpares. If the reset button is immovable, stuck in what I assume is its "up" position, I presume the element then is beyond repair? You've put me on the right track - *many* thanks.
@eSpares
5 жыл бұрын
Hi Gareth, on the Beko model in the video if the thermostat can't be reset you would need to replace the element because it comes as one unit but check your model first as on some makes the thermostat can be replaced without the element saving you money.
@footieman8653
4 ай бұрын
Perfect. Just did mine… easy peasy!
@eSpares
4 ай бұрын
Hi, thanks for your comment. Well done for completing the heater replacement yourself, glad we could help you along with our video guide!
@CaptainAd
6 жыл бұрын
thank you sir, saved me the cost of repairs, much appreciated :)
@jamesevans4964
5 жыл бұрын
Thank you so much! Your tutorial fixed it with one screwdriver! Much appreciated 😁👍👍👍
@kraffles
4 жыл бұрын
Brilliant. Just hit the reset and happy wife again. Phew. thanks for the informative video.
@eSpares
4 жыл бұрын
Glad to hear this Steve! Thanks for tuning in!
@KrakenKoopa
6 жыл бұрын
Thanks, this worked a treat, restting the the red button got the heat back in my tumble.
@eSpares
6 жыл бұрын
Thanks for the feedback James, there can be two main causes of the cut out tripping. 1: If air flow is restricted from a blocked filter or condenser it can overheat so check these are clean. 2: Often users turn te dryer off when 'hot' and do not allow the machine to run through the 'cool down' part of the cycle. Do not allow the machine to be stopped mid cycle for more than a few seconds or it can cut out like this.
@nomercyforthewicked
5 жыл бұрын
I've installed a new heater but still blowing out cold air, I have a beko tumble dryer dcx83100b , what can it be
@raydunne9323
5 жыл бұрын
Thanks Matt love your channel saved me a fortune
@eSpares
5 жыл бұрын
Hi ray, thank you for your post and glad we helped save you a fortune that's made our Monday ☺
@alinalbin9402
5 жыл бұрын
Thank you so much for video 👍👍👍. ..I replaced exactly like in video. ...working...You the best..thank you 🤗🤗🤗🤗. ..👍👍👍👍👍👌👌👌
@eSpares
5 жыл бұрын
Hi Alin, thank you for your post and glad the video helped and have a lovely day.
@rscelectrical7091
7 жыл бұрын
Excellent information, I haven't come across 1 of these Dryers yet.
@eSpares
7 жыл бұрын
Sounds like you are enjoying some of our videos, thanks for the feedback. 😊
@ivicajanev9697
10 ай бұрын
So my dryer works normally except from time to time it makes a squeaky noise. Do you know what couod be the cause of this???
@Sot194
8 ай бұрын
Hi I have taken off the cover but can’t see any heated stuck on the back where else can it be ?
@seancoles7896
7 жыл бұрын
Also beko has a massive problem with the main PCB, that will also give a failure in heating, all other parts will work fine.... This is a problem that starts at the sensors but shows very little sign until it over heats the PCB.
@paularussell3564
7 ай бұрын
What if i press the reset button and it doesnt move? Is it just really stiff, or will it only press down if it clicks?
@ccmogs5757
5 жыл бұрын
Good info. vid , just reset my 6130 :)
@eSpares
5 жыл бұрын
Hi CC MOGS, glad our video helped.
@ccmogs5757
5 жыл бұрын
Why 10 dislikes baffles me , for christs sake the video is showing you what to do !!!
@eSpares
5 жыл бұрын
Hi CC MOGS, thanks for the support and if anybody wants to tell us why they don't like our video we like to hear where we can improve.
@2030corpusdelicti
6 жыл бұрын
Perfect Video! Greetings from Germany
@eSpares
6 жыл бұрын
Hi, thanks for the comments. Remember to like and subscribe for more helpful videos in the future.
@BillGleeson
5 жыл бұрын
Thanks, a great help, fixed the problem quickly and easily.
@eSpares
5 жыл бұрын
Hi Bill, thank for the post and glad we could help.
@ljubomirsavic8443
5 жыл бұрын
How to goin in test mode
@eSpares
5 жыл бұрын
Hi ljubomir, Program selector is set as delicates and while pressing the buzzer cancel button, turn on the dryer. After 3 seconds service test program starts and buzzer sounds. In this program, start/pause/cancel button is used to pass other steps. All LEDs blink.
@ljubomirsavic8443
5 жыл бұрын
@@eSpares dcu7330 for this machine
@eSpares
5 жыл бұрын
Hi ljubomir savic, yes it should work on the DCU series of machines.
@rachelmangundu5493
4 жыл бұрын
Thank you for your video! My beko tumble dryer sounds normal, is spinning normally, but not heating. I removed the cover and pressed the reset button and heard a click, still no heat. Any tips on what to do next?! Thank you!
@eSpares
4 жыл бұрын
Hi Rachel, you will need to test the heater to confirm if it has failed and we have a video to help that shows how to test it kzitem.info/news/bejne/1aiAvpinh3SfaoI&t let us know how you get on.
@Sot194
8 ай бұрын
The model I have is the DSX83410W and I took the back panel off and can’t see any heater
@andrewwilliams9428
6 жыл бұрын
Hi I did the test on mine on KZitem at the end the red light on Drying was on what does that mean?. It still runs for over 3hrs and does not stop??? Thanks
@pinstripebanditt
5 жыл бұрын
hi ther my beco tumle dryer keeps triping my electric i have looked at the heater and ther is moisure build up the buton doesnt reset so i ausume its safe to say its the heater if so could u put me on the right path to finde the correct replasment parts from your store best wishes the model of dryer is beko dcu8230 s/n12-219980-12 thanks flor you time
@eSpares
5 жыл бұрын
Hi Kenneth it does sound like the heater and here is a link to our website www.espares.co.uk/search/mo1570443pt1584/tumble-dryers/heaters/beko/dcu8230
@josephbrennan4622
4 жыл бұрын
Great video again, What if the heater is replaced and it still wont work?
@eSpares
4 жыл бұрын
Hi joseph, how did you confirm the heater had failed? if the heater has been tested with a multimeter and it is OK, check the thermostats, meter the wiring from the board to the heater and let us know the model details if you need any more help.
@josephbrennan4622
4 жыл бұрын
@@eSpares Hi did test one read faulty so ordered a new one be on the safe side thank you for getting back so quickly. joe
@TruthSeeker0413
7 жыл бұрын
Great video. Wish I listened more about your sharpness warning haha blood everywhere but all good :-) thanks bro
@eSpares
7 жыл бұрын
Thanks for the comments, hope the 'injury 'was not to bad and this reminds others.
@TruthSeeker0413
7 жыл бұрын
Not at all im totally fine thanks. Im used to small cuts lol i removed the part and am awaiting the replacement (£60 lol) fingers crossed, many thanks for your help and concern :-) subbed
@eSpares
7 жыл бұрын
😊
@JonMuk
6 жыл бұрын
Thanks for the video
@eSpares
6 жыл бұрын
Hi JonMuk, glad it helped.
@deanbater2539
6 жыл бұрын
Yes thank God cheers mush🙌👍
@eSpares
6 жыл бұрын
Hi Welsh wizard, glad the video helped and have a great day.
@rachaelthompson9746
6 жыл бұрын
Hi ive a Beko DCU 7230B and the light inside the drum is flashing. Looked online and it seems to be a common issue but cant find a fix. Does anyone have any ideas is it a mainboard issue tho the dryer works perfectly. Thanks
@eSpares
6 жыл бұрын
Hi Rachael, the first thing to check is for a loose connection on the lamp holder, also check the bulb is tight inside the holder.
@tinamani6038
6 жыл бұрын
Hi my beko dryer is not heating up and the red button keeps turning of and have to keep undoing it to reset it. Plus I had so many parts change for the dryer but still not working. Do you think it's worth getting it fix and buy a new heater for it. Thanks
@eSpares
6 жыл бұрын
Hi Tina, if the button keeps 'tripping' it is due to overheating. Check the filter and condenser is clear of debris as this may be your problem. Watch this other video before suspecting a problem with the heater: kzitem.info/news/bejne/0a6Qr5mqnqifhqQ
@alexko8504
4 жыл бұрын
Hello, Mat. Thank you for sharing this helping info. I have the exact same model DCU6130 S. My Q is why do I have to change an entire heater element (which is not faulty) when I could only change both thermostats? For a way lower price.
@eSpares
4 жыл бұрын
The thermostats for your model are listed to be supplied with the heater element only and are pre-fitted onto the heater
@Sarah17Sing
5 жыл бұрын
hi watched this tutorial, finally sourced and bought heater from ebay, for my dtgc8011w beko condenser. now ive hit a snag, the electric connection is housed in a white block thats coming out of a sliver sleeve box, i cant figure out how to disconnected it . many thanks if you reply.
@eSpares
5 жыл бұрын
HI Sarah, the connections are held in by a screw and a snap fit connection, you need the top off and there is a screw on the back to release to get the wiring block out and that one is the snap fit one.
@Charlotte-ii6to
6 жыл бұрын
Hello I have done what you did with the button if don't work is it defiantly the heater needs replacing and not thermostat everything else works well and were would buy parts I need try fix not buy another dryer this will be my fourth dryer I can't afford keep replacing them my family laugh never seen anyone go through dryers like me please all help would be appreciated thank you
@zikermu
4 жыл бұрын
Hello, if your tumble dryers are dead quickly is that there is a problem of common mode. This may simply be the fact that you do not clean the filter with each use. When the filter is clogged, the airflow over the resistance is lower and therefore warmer. This triggers the safety thermostat and makes it age longer. quickly resistance. A second common mode case may be a thermally sealed room (ie without sweeping (with fresh air in at the bottom + air evacuation in height (because the warm air is lighter)) of air. The thermal phenomenon on the resistance is of the same nature (but not of the same amplitude) as previously described.A third common mode could be a higher than normal mains voltage, in which case the power dissipated by the resistance would be higher [Formula : P = (UxU) / R]. This hypothesis is plausible but in general, one of the electronic components of the card dies.This seems to me the best way to go.
@connorblundell5438
5 жыл бұрын
What the ref number for this part as this is the same make and model i have as there are two on your website which look identical but differ in price
@eSpares
5 жыл бұрын
Hi Connor, on some Beko models it will be serial dependant so you need your full model's details to get the correct part, contact the sales team who will find the correct part for your machine www.espares.co.uk/contact/sales
@cascross1
7 жыл бұрын
Thanks espares, I have got the same tumble dryer that you ve worked on in the video, I am wondering if it's possible to just change the thermostat and not the whole heating unit, and if you can, do you sell just the thermostat for this model. Also do you sell the complete set of screws for the back panel covering the heating unit as I have lost a few of my screws, thanks pal.
@eSpares
7 жыл бұрын
Hi Casley, the thermostats are riveted on the heater and are not available separately. For the screws fill in your information on this link and we should be able to supply them: www.espares.co.uk/contact/sales
@PeterFalconII
6 жыл бұрын
Hi can you tell me if the on this dryer should have any resistance or how to test the heating element. this dryer is the same as one I am looking at but the dryer only seems to be heating up every once in a while sometimes it's running at 70 -80 °c sometimes it's running at 30-40°c and one time after take it apart and putting it back together it ran a few times at 90-95°c which I believe it should do. Most of the time it seems to be running at 70 ish it's the digital version of the one your fixing in this video. I tested the heating element and the thermostats that's resets let was reading short circuit and the other thermostat had some resistance.
@eSpares
6 жыл бұрын
Hi Peter. The heater on the dryer in the video has an overheat cut out and a resistive NTC thermister that monitors the air temperature to feedback to the control board. Your problem is likely in our opinion to be the sensor that is supplied with the new heater but it is possible to be due to the control board.
@PeterFalconII
6 жыл бұрын
What resistance is on the thermistor on the heating element at room temperature please. Just helps me eliminate faults. The ntc on the front is reading just like a normal thermistor on the nearer showing room temperature on the my meters thermostat setting. The rear is showing like it's a capacitor rising in resistance as I measure it it settles out in ohms at 8k ohms which is about the same as the front one.
@eSpares
6 жыл бұрын
Manufacturers do not supply the specific resistances of NTC's. Depending on the meter and its range the current flowing through a NTC can warm the element changing the resistance so this may not be faulty.
@martinginever7654
6 жыл бұрын
Can I swap the door on aBecko DCU8230 from right to left opening
@eSpares
6 жыл бұрын
Hi Martin, we are sorry but you can not change the door round on this model.
@yassergabr20101
7 жыл бұрын
thanks a lot
@eSpares
7 жыл бұрын
You are welcome Yasser. :-)
@ljubomirsavic8443
5 жыл бұрын
How to goin in test mode dcu 7330?
@aladinliverpool
7 жыл бұрын
is this the only replaceable part or are there any thermostats to replace at?
@eSpares
7 жыл бұрын
The heater has the main thermostats on the assembly at the top. There is also a NTC sensor on this model at the front and the video showing replacement is here: kzitem.info/news/bejne/1rCPtJ6geptemHY
@aladinliverpool
7 жыл бұрын
eSpares thank you for the info. looks like it was the condenser unit being clogged up with gunk inside it on this occasion. so was taking an age to dry clothes according to the missus. but strangely enough. cleaning that out. my earache has stopped! thanks!!
@adamc4712
5 жыл бұрын
Was that cut finger at 4:23 from this washing machine? - about to try this!
@eSpares
5 жыл бұрын
Hi Adam, thanks for your comments and a good spot. This video is one of our older ones, so it would be difficult to recall. We recommend wearing DIY gloves to protect your hands.
@Vic-ng8if
5 жыл бұрын
Thanks for the vid.
@eSpares
5 жыл бұрын
Hi Vic 2%, thanks for your post and hope the video helped you fix it.
Пікірлер: 108